@@AgaYuditraStudio alhamdulillah, i got all i need, to make all those pvc pedal i just need going to junkyard, and surprise its free. kapan2 tak dolan nek omahmu ms aga, ngrangkai elektrike .
I see a young man trying hard in every possible way to acknowledge his work and guide others through his videos, hats off to your workmanship and hard work.
Fantastic video! don't wear wool gloves when working with power tools though. It is better to not wear anything if that is all you have. The cotton will get wrapped up in the drill and take your finger with it. Glad you still have all your fingers.
It is not necesary an arduino, you only need where to connect +, signal and gnd of the throttle, brake, and clutch in the connector pins, for example for a thrustmaster t150 you will need a rj11. I can share with you the schem (sorry for my english)
@@sergiomangas3434 Hola Sergio, puedes compartir conmigo el esquema de conexion? tengo un T150 y me gustaria montarme unos pedales como estos. Gracias, espero tu respuesta. Un saludo.
@@pablomadrid5551 www.racedepartment.com/attachments/g25pinout-png.148609/ aqui tienes pero tendrias que comprar un adaptador de logitech a thrustmaster. como has hecho para que el recorrido del pedal sea el mismo que en el juego?
what is the pneumatic cabinet door lift's length? Because i can't find the same pneumatic cabinet door lift like that, so i have to find another one in my marketplace, but it only has 270mm, 210mm,... ( the length of the door lift)
you are a fucking genious dude. now , because of you i wanna build one... but for pedal assembly ill use real car parts. i guess it would be possible too for the steering column.
Incredible work, wanna try it. Some questions. First of all, what things are made with 3d printer? the pedal and the bases? that 4 pieces longs no? (sorry for bad english) and the other question, how to put in the pc, i mean, configuration and games
Man, first thanks a lot for shared with us you project. A important question about pneumatic, you know the power of him(30N-3KG, 40N-4Kg, 60N-6Kg....)? I have 60N pneumatic but is very to strong.
Where did you buy that pneumatic cabinet door lift? I’m having troubles finding it, I already bought 3 of them and none of them are like yours, can you provide the link of the product?
Hi, nice build. I need only two info. How much is the lift long (if possible in millimeter) fully compressed and fully extended (end to end)? Cause some sites report the items measurement in extended way and some other in compressed. Thanks for help :D
Hello. I want to know where you bought the parts.. and what is the material of that pedals? and in racing wheel DIY, where can I buy the printer encoder? I can't find printer encoder in my country's internet mall.
I bought part on the indonesia marketplace. Pedal using PVC sheet, check onthe description box for parts. You can buy on the printer service, or use broken printer.. Or you can change with incremental encoder.
ane mau tanya itu hidroliknya kok bisa di baut dari samping?? ane cari di lazada kaga Nemu yg gitu... rata" paket ball join... kalo blh tau belinya dmn?? thank!!!
Read Description for Template / Plans
Don't forget, Safety First.
dudukan n itu bikin sendiri ya bang aga ?
Iya betul,
@@AgaYuditraStudio alhamdulillah, i got all i need, to make all those pvc pedal i just need going to junkyard, and surprise its free. kapan2 tak dolan nek omahmu ms aga, ngrangkai elektrike .
I need materials llink
I need materials link
I see a young man trying hard in every possible way to acknowledge his work and guide others through his videos, hats off to your workmanship and hard work.
Clean and minimalistic look. I like that! Well done m8
thanks.
Can i do it with 9 inch pneumatic cabinet door lift?
Fantastic video! don't wear wool gloves when working with power tools though. It is better to not wear anything if that is all you have. The cotton will get wrapped up in the drill and take your finger with it. Glad you still have all your fingers.
thanks for your advice. :)
i love the loud as hell no copy right music
Super welldone!!! very Smart!! please what's the reference of the coil and the Cabinet door lift!!?? where can i buy them?
where did u buy the pneumatic cabinet door lift because i cant find online that looks like yours
super cool aaand super interested in trying this! question, how does the software read the pedals once they're assembled? ..is that super complicated?
Please make a video on diy steering wheel
@PCarba bro I'm from India.... And the price of t150 steering wheel is $ 390 in India
M4 Screws/Bolts and Nuts are completely missing in the Parts List.
well yeah, just use common sense
First of all, great build really like it! But could you show how did u wired all 3 potentiometers on your arduino board? Thank you!
It is not necesary an arduino, you only need where to connect +, signal and gnd of the throttle, brake, and clutch in the connector pins, for example for a thrustmaster t150 you will need a rj11. I can share with you the schem (sorry for my english)
@@sergiomangas3434 Hey man ! Just acquired a t150, would love to see thoses schematics if you have them laying around. Much thx
@@sergiomangas3434 Hola Sergio, puedes compartir conmigo el esquema de conexion? tengo un T150 y me gustaria montarme unos pedales como estos. Gracias, espero tu respuesta. Un saludo.
@@pablomadrid5551 www.racedepartment.com/attachments/g25pinout-png.148609/ aqui tienes pero tendrias que comprar un adaptador de logitech a thrustmaster. como has hecho para que el recorrido del pedal sea el mismo que en el juego?
@@mrgamingcraft9542 sorry for not answering you men, did not see ur comment :(
what is the pneumatic cabinet door lift's length? Because i can't find the same pneumatic cabinet door lift like that, so i have to find another one in my marketplace, but it only has 270mm, 210mm,... ( the length of the door lift)
Quick tip, if you're gonna drill all the brackets the exact same way, just stack and tape them all together, then drill :)
thanks for advice
Super talented brother
Awesome vídeo! To wich pedals would You compare this?
Can you make vid about pedals settings? I am not sure how to do this work with not full potensio rotate.
You can calibrate using dxtweak or diview.
@@AgaYuditraStudio I was about to ask that, thank you.
Thanks for tutorial brother. Our project will be done soon
Great 👍
Adding loadcell? Adding hydraulics?
What is the function of the pneumatic door lift in this if the gas is released?
Could you please explain?
Hi, can you give more info about springs? Like lenght, diameter of wire, overall diameter and numbers of coil? Its very hard to find a good spring :/
What's lenght the screws?
😦Wow!! Very impressive!
how do you connect the pedals to the arduino?
Great!!
But where did you find the 6 inch pneumatic cabinet door lift? And the coil springs?
Thank you.
I buy it on indonesian local market place
@@AgaYuditraStudio Bang bli dmna it pneumatic nya? ad link nya? blom nemu yg sama persis
you are a fucking genious dude. now , because of you i wanna build one... but for pedal assembly ill use real car parts. i guess it would be possible too for the steering column.
Hi. Can you tell me the size of the springs? And if it exists, the link to buy them?
Can i use this for my logitech g27 ?
Incredible work, wanna try it. Some questions. First of all, what things are made with 3d printer? the pedal and the bases?
that 4 pieces longs no? (sorry for bad english) and the other question, how to put in the pc, i mean, configuration and games
Hi, I like your work but where i can find the ponetiometer thing that spins it?
The Acrylic Arm how do i find/make it?
So... are these load cell pedals or?
Board nya / binding nya gimana bro? Kok nggak nemu ya dicari” biar connect ke pc nya
Can you make one with a load cell??
Bisakah Anda menjawab saya?
Berapa ukuran dan dimensi bilah dan lubangnya?
I can also use a B2K or B1K potentiometer?
Looks awesome, I am trying to do one myself. How many newtons do your pneumatic cabinet door lift has? I am afraid to use one too strong.
Don't worry about getting one that's too strong as you can always increase the distance from the turning point, which makes it easier to use.
Pneumatic 80nm?
Hi, what are the dimensions of the potentiometer turn lever? Thank you
Duid habis berapa gan buat ini ???
Penasaran mumpung lagi kere buat sim racing
What size is the spring?
what arduino i can use to wire the potentiometer? also i can use an old set for pedals as base for the potentiometer?
yang ke potensio itu 3d print gan? warna item
Very gud
Itu pake spring yg ukuran berapa gan? Lagi proses ngumpulin barangnya nih mau bikin juga. Makasih sebelumnya
Could you make the templates available? the link no longer works :(
Great setup but what exacty is pneumatic/hydraulic kitchen set? Key component that you dont go in to any detail with
6 inch pneumatic cabinet door lift
Is that rubber sheet?
per bajanya ukuran berapa ya om kira kira?
Could i just ask how many Newton of force you use on your pneumatic on the build. Thanks and great work. You've earn one more subscriber
it doesnt matter, it works only by a spring. pneumatics are dead, they are drilled
@AgaYuditra Studio how many Newton (n) have pneumatic door?
10N
@@AgaYuditraStudio than ks
hi good morning can you write me number potentiometr? this is logarithmic or linear?
Can linear actuator be used for making motion platform ???
could you give me a link or stl to this part that is attached to the potentiometer? Also, what are the dimensions of this steel-wire thing. Thanks.
Man, first thanks a lot for shared with us you project. A important question about pneumatic, you know the power of him(30N-3KG, 40N-4Kg, 60N-6Kg....)? I have 60N pneumatic but is very to strong.
u should make a little whole in it, it works only by spring
@@pysznarybka where can i make the hole?
@@lucvsss070 no matter where
@@pysznarybka and how I do it? with drill?
@@lucvsss070 no, use a metal saw , it shoukd be empty from gas
como faço pra conseguir os tamanhos correto do projeto?
Kenapa gak kpikiran dr dulu, make pvc sheet pedalnyaa, gebleekk 😁 manteb agan jenggot
Lanjutkan om.
@@AgaYuditraStudio print bracketnya abis berapa pak?
ta, mas poderia passar as medias em que cortou as partes
Where did you buy that pneumatic cabinet door lift?
I’m having troubles finding it, I already bought 3 of them and none of them are like yours, can you provide the link of the product?
Did you find any like this,i also cant find same cabinet door lifts.
@@GreekSIMRACING Sadly no, I had to modify the ones I bought before. I've cut them to make them shorter and I made a new thread for the top cap.
Nice design, looks nice and clean (y)
Thanks man.
@@AgaYuditraStudio just add pot lever limiter 9:12 toprevent pot from turning other way
thanks for your advice.
Pneumatic cabinet door lift-6 inches how many N should be (80N or 120N) and how long should the spring be?
www.bukalapak.com/p/industrial/mesin/suku-cadang-aksesoris-mesin/afszz9-jual-per-teken-baja
nice job :) have you stl file for 3d printer ?
Bine și unde sunt legăturile de fire? Adică nu cred că sunt prin wifi 😂
Can't find the hydraulic/door lift
Bro itu potensio nya gak bisa ketekan semua ya? Jadi masuk di input nya hanya setengah
Can you send a link of the cilinders?
What wiring do you use for it to work
Eres un genio tio very nice
Hello, could someone tell me how to connect to the pc?
Where i can find the pneumatic cabinet door lift - 6 inch? i looked in amazon and aliexpress... but didnt' see anything like yours
Check this product, choose color 6in
a.aliexpress.com/_d6v0zpw
Hello, what can i use instead of pvc?
im guessing i would need a usb encoder too? or somthing along those lines?
You need arduino pro micro or leonardo.
You can use joystick library code for this project.
keren banget, bisa pesan kah gan?
Does lifts are with gas or you cut them to release the gas/oil?
I made hole to release the gas
how do you connect it with your pc??
please help......one question can i wire in hall sensors the same way as the pots.....(same 3 pins)
Yes you can use hall sensor
@@AgaYuditraStudio Thanks....hall sensors and pots just arrived......bought extras for other projects
bang itu pernya beli dmn? sama jenisnya apa? thx
cade os desenhos do pedal? em pdf
Hydrolis ukuran berapa
Did you cut the pneumatic door lift to be that length?
Use short type.
Mantap masbro, inspiratif
Itu minyak hidroliknya di keluarin gak?
itu isinya gas, dibocoring dulu pake bor kecil.
Thanks for sharing
itu spacer di menit 4:08 namanya spacer apa gan? kalo nyari di market place namanya apa?
Mas itu Hidroliknya di potongkah? ukuran berapa?
Yg mini, tidak dipotong.
great ideas
thanks
Hey, do you have plans for the pedals? And what is the hardware you will use for these?
Read the description.
Template and parts in the description box.
I have a problem with downloading the files, could you put it in less scam sites?
Bang itu lekukan yg nyambungin pvc ke pedal pijakan kaki sama yg bawah nya ,apa itu?? Apa bikin sendiri, ,? Atau barang apah
Pakai 3Dprint. Bisa bikin sendiri pakai plat aluminium.
Itu pakai pvc brp mm gan?
Hi, nice build. I need only two info. How much is the lift long (if possible in millimeter) fully compressed and fully extended (end to end)? Cause some sites report the items measurement in extended way and some other in compressed. Thanks for help :D
Hidrolik apa yang digunakan bang
Ukuran detail per nya om??
Hydraulic nya beli di toko online namanya apa ya ?..
link penjelasan desainnya sudah tidak ada.
how many Newton (n) have pneumatic door 40N, 60N, 80N, 100N ?
100N,
@@AgaYuditraStudio 100 or 10n? Whats the difference?
Tambahin ini juga dong bang ditokopedianya
kalo sekalian dikasih link tempat belinya lebih bagus bro
overall mantap desainnya, berkelas (y)
Thanks gan.
Wah saya tidak berafiliasi dengan penjual2 tertentu.
Pembelian di toko2 online indonesia semua kok.
Langsung search saja gan. Hehe
@@AgaYuditraStudio tapi kalo di kasih lebih mantap. saya cari" per sama lain" di pegas nya susah mas
Per cari di Buk*lapak, gunakan kata kunci "per teken"
@@AgaYuditraStudio PER ukuran brp mas?
Panjang PVC yg horizontal SM vertikal brp cm mas@@AgaYuditraStudio
hidroliknya pake yang berapa panjang mas ?
18cm
what you use type potentiometer rotary or linear?
rotary 10K
Hello.
I want to know where you bought the parts.. and what is the material of that pedals?
and in racing wheel DIY, where can I buy the printer encoder? I can't find printer encoder in my country's internet mall.
I bought part on the indonesia marketplace.
Pedal using PVC sheet, check onthe description box for parts.
You can buy on the printer service, or use broken printer.. Or you can change with incremental encoder.
@@AgaYuditraStudio Thanks a lot!
Have a nice day sir :)
ane mau tanya itu hidroliknya kok bisa di baut dari samping?? ane cari di lazada kaga Nemu yg gitu... rata" paket ball join... kalo blh tau belinya dmn?? thank!!!
Di bor sendiri.
pantesan ane cari gk ada :D... makasih infonya gan.. sukses terus channels nya