How To Make CNC Program On Siemens Controller Cnc | How To Check Siemens Program Graph In Cnc Hindi

Hello Dosto,
Is Video How To Make CNC Program On Siemens Controller And How To Check Siemens Program Graph In Cnc Hindi Me Hum Sikhenge Ke Simple Step By Step Program Siemens Controller Par Kaise Banta Hey?
Or Is Program Ka Graph Hum Siemens Par Kaise Dekh Sakte Hey?
Dosto Hum A Bhi Sikhenge Ki Fanuc Or Siemens Do No Me Proagram Me Kya Kya Fark Hey?
To Aap Is Video Ko Pura Dekhe.
In This Video How To Make CNC Program On Siemens Controller And How To Check Siemens Program Graph In Cnc Hindi We Can Learn How To Make Simple Cnc Program In Siemens Controller.
Also We Can Learn About How To Check Program Graph In Siemens. And Also We Compare Program In Both Variant. We Can Watch Step By Step Different Between Fanuc Program Block And Siemens Program Block. Watch All Difference G Code And M Code Between Fanuc And Siemens.
Please SUBSCRIBE MECH TECH12 For More Cnc Videos.
[e-mail] (For Any Suggestion)
All Video Link
Video1- • How To Learn CNC Machi...
Video2- • How To Cnc Machine Pow...
Video3- • How To Make CNC Progra...
Video4- • How To Check Or Set Cn...

[@mehulpatil2091]

Bahut hi achha

[@VishalYadav-ew5ee]

Good job 👍 sir l like this video

[@mechtech1250]

Thanks

[@rathodbhavinsinh3486]

Superb explained you

[@mechtech1250]

Thank you

[@wanderer-bhupinder]

Thanks sir

[@pcmahato7980]

Nice video sir

[@mechtech1250]

Thank you

[@AMITYADAV-yz7nz]

Nice sir

[@mechtech1250]

Thanks bhai

[@navnitkumar9251]

nice video

[@mechtech1250]

Thank you

[@AMITYADAV-yz7nz]

Your chenal is help full for me

[@mechanicalpc3941]

Sir bhut aacha aap samjhte ho
Sir aap vmc me video kb bano ge

[@mechtech1250]

Thank you and i will try my best

[@Vishuganesh]

Thanku sir...

[@mechtech1250]

Thanks

[@pratapsinhzala4875]

Thanks

[@mechtech1250]

Welcome

[@sadashivpol6130]

bina canned cycle se simple thread & groving cycle ka programme upload kijiye sir & apke sab videos No 1 Quality ke hai so thank you so much.

[@maazvhora6473]

Sir aapka program is perfectly superb but next video meh background music off kare

[@mechtech1250]

Okk thank you for your feedback

[@SanjaySharma-ct2ww]

Nice

[@mechtech1250]

Thank you sirji

[@rameshdaver7087]

Aapke sare video supar he sar

[@jigneshgosai6822]

your all video so usefully.
please Siemens aur fanuc ke turning cycle ke video upload kare. Siemens ki contour cycle video bhi upload kare.

[@mechtech1250]

Thank you And Sure Please Watch Regularly I Will Post In Future

[@rajendrahantal8332]

Sir jump to desired blocks in siemens turning m/c pr ek video bnayiye

[@mechtech1250]

Okk i will

[@deependrasinghnegi4850]

nice Sir aapka explanation tarika bhut hi jyada short, attractive, easy and steek hai samjhne me or dekhne me bhut aasani hoti hai or every word is important ..thanks aap ek bar 2D or 3D programing k difrents related video jaroor kosish kariyega..Hass Autometion me Semens or Fanuc contorl me G AND M ko htakar or kon se difrensses hote hai...thanks

[@mechtech1250]

Thank you bhai

[@vasimansari1919]

Ok sir.sir.tapper.turning.ka.program.kaise banaae I'd.me

[@9926630901]

Badiya

[@mechtech1250]

Thanks

[@raghvendrasingh7941]

Hello sir aap ki sari video greatest he. Please say critical radius ke baare me 1 vedio banae. I will wait your video

[@mechtech1250]

Thank you And Sure

[@HardikPatel-tr3qu]

CNC hmc machining centre set up...

[@mechtech1250]

Okkk

[@akashsambrekar5632]

nice video sir.

[@mechtech1250]

Thank you

[@AMITYADAV-yz7nz]

Please sir kuchh turrning par banaye aur cnc ke setting ke bare ne

[@mechtech1250]

Thank you and please watch regularly. This channel provides all types of video about cnc turning centre in future.

[@samirsahoo3551]

sir flash card main program kaise copy or paste korna hai uska ek video banaye na

[@mechtech1250]

Ha uska bhi ek video jarur upload karuga

[@rahulg9917]

Sir siemens m kisi tool ki diary no2 kaise offset table m dalenge sir iski bhi koi video upload kijiye sir please

[@mechtech1250]

Okk i will upload

[@udaybudha8066]

Hi sir ye machine pe manuly front side stoper ka kaisa program karna hai

[@murtazayousaf6384]

Sir Plz Ap Apni Videos Regular Interval k sath Upload krdia kra
Thankyou soo Much For Great Videos

[@mechtech1250]

Thank you And Sure

[@_NaimishMakwana]

Siemens system me sub program ka video banaye

[@mechtech1250]

Okkk

[@sohanaparveen3690]

Sir 828d system ka function upload kijia

[@mechtech1250]

Okk i will upload

[@chilamalasubbucnc]

Sir please explain about CHF and chr,cr rnd
This type words and how to write in program

[@mechtech1250]

Chf chamfer, cr corner Radius, etc

[@vickysingh-lp5gx]

Dear sir,
I don’t know much about Siemens control as compare to fanuc control.
Could you share more videos About Siemens please?

[@mechtech1250]

Sure i will upload more

[@mixlearningtv4800]

mastercam se keise siemens controller machine ki programme karsakte he.please sir bataye

[@mechtech1250]

Okk i will upload

[@sanjaysahoo3470]

Sir please upload video about Siemens control panel looping chart preparation

[@mechtech1250]

Okkk

[@mechanicalpc3941]

Sir ek question hai me app ki sari video dekhta hu aap ye bta do ki me pipe ke Ander 0.5mm per 30 angel ka chamfer kese lgate ga wo chand aur kon sa tool lage ga ye bta do bs plz

[@mechtech1250]

Chaliye aap ke liye ye me upload kardunga next video me

[@sachinchandwal7360]

Sir or videos bnao

[@mechtech1250]

Okkk

[@sanalnipane8721]

Sir, Background music mat dalo

[@mechtech1250]

Okk thanks for suggesting

[@dilshadhasan7598]

angles kaise nikalte hea fundamental smjhaye

[@mechtech1250]

Ek video hai

[@mohdvasim791]

VMC machine ke bare me kuch bataiye

[@navnitkumar9251]

Hello sr mera request hai aapse ki aap champer ke sath radious ka program banane par video banaye

[@mechtech1250]

Okkk bhai

[@patelvipul6169]

Sir Arc or tapper ka program kese banate he siemens me

[@mechtech1250]

Okkk same as fanuc

[@WHITEDEVIL-zg4jp]

G75 ka cycle ka pograme banavo

[@mechtech1250]

Okkk i will

[@mixlearningtv4800]

sir, main 1 siemens 808d controller vmc milling liya .main mastercam se programme kartahu.but mastercam se siemens run nahi horaha he,sir pleas koi solution dijiye.

[@mechtech1250]

Okk i will send

[@shshankdhama9778]

How to type characters in lower case in siemens 808d system

[@mechtech1250]

Okk i will

[@ranjeetmahatoranjeetmahato1424]

Sir humko v program silkhana hai

[@mechtech1250]

Okk sure

[@renukabalekundri1642]

सर micro प्रोग्रामिंग कैसे करते है

[@mechtech1250]

Ek video jarur upload karuga

[@Gabrial815]

Helloo sir cycle 70 71 72 ke bare me ek video banay or use kese use karte he thoda samjhy

[@mechtech1250]

Thanks. Ha bhai me bahut jald upload karnga.

[@TheEducationofIslamA4]

sir angle me _ me aur +me kaise dalte hai ek videi me 3 4 angle nikal kar batye

[@mechtech1250]

Okkk i will

[@cncgurulaxmanmeghwal366]

Siemens 808D turning centre
Tapping cycle
Program
Help me

[@mechtech1250]

Okk i will

[@yajwanreddy6441]

How to set tool life please share me

[@mechtech1250]

I will upload

[@aniketgaikwad6613]

is tjere a barpull system for fanuc...

[@thisismrart]

Music add mat karo samaj me nahi aata please🙏🏻

[@mechtech1250]

Okkk i will always remember

[@sagarrathod9518]

Sir please ofs set video semunsh machine aplod kijaye

[@mechtech1250]

Yes aage mai jaldi hi offset video post karne vala hu. Thanks

[@r.r.rshort3524]

Sir siemens cantrol ke bare me bataye ofset kaise lete hai

[@mechtech1250]

Suru. Mere next video me dekh ne ko milega

[@gurman679]

Hi how to make g code of closetsin mozaik software,.,?

[@mechtech1250]

I will check and reply

[@raajeevhanda8115]

SIR SIEMENS CONTROL KA YEH VIDEO VISUALLY CLEAR NAHI HAI.ONLY AUDIO IS CLEAR. PLEASE TELL HOW TO GET IT.

[@mechtech1250]

Okkk bhai ek video upload karuga

[@narendrasinghbani5637]

Thoda saf bolne ki koshish kre

[@mechtech1250]

Okkk i will try

[@SandeepSingh-zx2hj]

rework krne ka sime tarika kya h ki resection na ho please make a video

[@mechtech1250]

Okkk aage aane vale video me try jarur karunga

[@mechtech1250]

Okk i will

[@parveencomedian9946]

siemens xtri-r doesn't work pls help me sir

[@mechtech1250]

Controller and series?

[@cncmacrosteps2756]

Dear sir , i Have One Doubt ,CNC Siemens Control for G54 to G59 for that parameter Number Sir I am just one Example for Fanuc Control :
G54 in a XYZ Axis Parameter Code for #5221,#5222,#5223.
so;
Siemens Control:
G54 in a XYZ Axis Parameter Code ? Sir.
Thank You.

[@mechtech1250]

I will send

[@jignesh1821]

background music jyada h.

[@mechtech1250]

Okkk And Thanks

[@vickysingh-lp5gx]

Dear sir,
I have a problem on cnc fanuc machine.
Suppose an operator done wrong loading and while cutting our tool breaks because of extra material to cut. So how to we stop our machine when tool get extra material to cut?
Is there any interlocking when spindle fave overload while cutting and it can prevent our tool to broken?

[@mechtech1250]

Every controller locked at fix overload point.

[@vickysingh-lp5gx]

Could you tell me how to interlock with each tool?

[@vickysingh-lp5gx]

Where can I see that overload point screen?

[@mechtech1250]

This is factory defoult setting so please don't change it

[@vickysingh-lp5gx]

Ok sir but where can I see that setting?

[@swapnilpatil9277]

Sir apka no send kijiye plzz.

[@mechtech1250]

Okkk

[@AMITYADAV-yz7nz]

Nice sir