Making a Simple Air Compressor Using Gas Bottle and Fridge Compressor - DIY Air Compressor Machine
Вставка
- Опубліковано 11 жов 2023
- Making a Simple Air Compressor Using Gas Bottle and Fridge Compressor - DIY Air Compressor Machine
I hope you have fun with the video! If you have any questions on the used tools, materials or the processes, write it in the comment section - i´ll try to answer as soon as possible!
If you want to support my channel hit the like, leave a comment, subscribe and share my work. It helps a lot! :-)
Thanks for watching! Please subscribe to support my channel.
I hope you like it!
If you like it please Subscribe: bit.ly/3EaCNEI
#aircompressor #diyaircompressor #diy #dtrestoration #restoration - Наука та технологія
No questions asked, Yoda at work... Young jedi no need to understand. Learn you must.
The force is clearly with that guy. A TRUE PLEASURE watching that old-school mecqnic/electrician work. This is real kraftsman ship at work. Somthing that has been lost over time.
Thank you for allowing me to whites this.
Perfect 👌
Second question: why you have divided gas bottle in two parts and then rejoin them by welding?
A cheap welding mask/face shield wouldn't go amiss! 😎
Не надо слушать глупые советы,надо слушать себя,свой опыт.Молодец!!!
احسنت . اختراع و ابتكار جميل وسهل . بالتوفيق صديقي . تحيات اخوك من الجزائر .
Hai Good Evening Super video Se inside all parts And Re fitting s super you are very Hard working super finishing iron Reasting and pant ing you have very knowledge All Tools God bless you and your family 👍👍👍👌👌❤️🌹
Why cut the tank and then weld it again, I don't understand
They are checking for cracks that could cause the tank to explode u notice the tank is quite rusty he may have been wanting to see if the rust has eaten through the metal
Agreed. Simpler to do a pressure test in safe conditions. Some decent compressors and air tanks to be found on junked trucks.
Why not buy a bit more decent tank, saves a lot of time and work...
Well i see you dont understand the economy of most of the world news flash the world is broke and crap is getting even more expensive more news at 11
This is a good practice, to make sure can remove all sludge, carbon etc.
11:09 You know those kids are staring straight into that welder haha
Техника безопасности на высоте! Сварка без маски, песок в глазах. Ожог обеспечен и для рук. Идея не новая, а в целом браво!
I congratulate you, you know that recycling is really always successful.. greetings
All of all for that Justice chippy on buy one of these days it's gonna be small😂❤
so cool
Oh, thank you. Great video, you did a great job, a new invention💪
Grande profissional, parabéns.
Good job 👏👏👏🌹🌼🍀🇮🇶🇮🇶🌹🍀🍀🌹🌼🌺
Good working
Well done my friend, from, Bayamo, Cuba,your again a Genius
ابتكار جميل ويستحق التقدير ❤😊
احسنت اتمنا من الله اني يوفقك انت محترف احسنت❤
Rien à dire, juste bravo et merci, car très bien détaillé 👍🏻👍🏻
Vou copiar seu projeto 😁
That looked like alot of fun!
I have a couple questions, what’s the ( c f m) and the pressure ?
جميل لديك خبرات كثيرة
Moy buen video saludos abrazo grande desde Argentina 👍🤗
Third question: it should be better testing of motor unit before closure by welding. Why not?
Excelente!!! Mi estimado .mucho que aprender de usted.
Excelente vídeo, perfeito obrigado. Grima Rj
I agree that's what I can work out white covered in half then welded back again if he's going making a Presser out of it do you want to make sure there's no pinholes❤😢😢😂
Parabens ,,,, daquela coisa orrivel ,o SR fez essa marvihosa maquina , e so nota 1000. Mesmo .kkk ,Deus Abençoe muito seu trabalho 🎉❤🎉🎉
Bravo ! Beau travail (nice work) 👏
Nice job but you should seriously consider getting a welding helmet, also what is with the spot welding, just turn down the power and do one weld run, this would make the welding stronger and more reliable, if you’re welding machine only has one setting then increase the length of the power line between the machine and the torch this should increase the resistance and decrease the power of the welding rod. Keep up the good work and I’m looking forward to your next video
That metal is too thin for a full continuous weld.
ขอบคุณมากครับกับสาระดีๆ
Muito bom
Parabéns 👏
So much beautiful and like 🙏🙏🙏🙏🙏🙏🙏👌👌👌👌👌👌👍👍👍👍
Esse camarada é o famoso professor Pardal até os óculos.😂😂😂
Excelente vídeo
👍👍👍👍👏👏👏👏. Bom
Tré bravou10/10
Hi nice job but you don’t have eyes protection you should use a mask
Boa tarde, aqui no Brasil não abrimos o tambor de gás Frigem para transformar em receptáculo de compressor de ar ,simplesmente sacamos à válvula lavamos e continuamos o processo. 😮
❤❤❤
Good work😊
Up ❤❤❤❤❤❤❤❤❤
Muito bom parabéns use máscara na ora de soldar por favor.
Parabens ,,,daquele feio o SR fez essa arailh
Nice job!
I was thinking the same thing😮
Good Job
Einfach öl in den Kanal spühlen super
הרבה מאד עבודה
Дураков работа любит😂
How to build a bomb:
and what happened to the repaired compressor? at min 36:51 it's a completely different compressor 🤔🤔. can be recognized by the weld seam, the dent in the cover and the electrical connection....
ผมก็สงสัยว่าผ่าถังทำไม ทั้งสองถังแล้วประกอบใหม่
Para que lo abre y después vuelve a soldar, el freon es inflamable?
por que você dividiu o botijão em dois e depois soldou novamente?
Компрессор другой поставил.😂😂😂
Muy buen travajo muy profesional pero no tiene cuidado con utilizar los equipo de protección soldar sin máscara usar la amoblados sin guarda mi guantes ni lentes 👌🤦♂️🤷♂️🇵🇦🙋♂️
В финале компрессор другой.
Фреоновое масло будет активно выносится в ресивер и попадать с воздухом на окрашиваемые изделия. Нужен маслоотделитель и возврат масла в картер компрессора.
المشكل في الضاغض لانه سيتعرض الى الاحتراق بفعل الماء كيف الضاغط يمتص الهواء وهدا الهواء فيه نسبة من الرطوبة اي عندما يضغط الكباس على الهواء تتكون قطرات من الماء فتختلط بالزيت فمع المدة يصبح لدينا الماء والزيت فيتلف الضاغط.
What sand blasting doses . What it do ?
Maravilhoso, mas muito perigoso por não usar nenhum equipamento de proteção
عمل جيد ، أنت بارع تستحق التحية .
А зачем баллон разрезал? Чтобы потом сварить?
Very nice work 🎉🎉🎉
👍👍🎉
👌
👍
very nice
Very good WORK......But put GLOVES..,!
who needs welding masks when you have slow closing eyelids
😂😂👍
He needs a Mig welder!
Why did you change the Compressor did the original not work ?
Pq cortou ao meio se vai soldar novamente?
Hi DT can you finish the UAZ project waiting so long maybe will pop up ,but nothing thank you
Lo felicito, pero tienes que emplear las medidas de seguridad
Pero él pudo haberse conseguido un tanque nuevo. 🤔🫣
The fridge compressor is not the same with the first. He just painted it but he does not use it
.😅
Your right! the dent in the top is to the left of the power intake and in the one he works on its a different dent and its to the right. Well spotted.
لماذا قصية الاصتونه وعودة لحمتها
Пособие по тому, как делать не надо!
Good job but really dangerous. Every gas bottle, even if it's empty, has some residual gas adsorbed in the interior surface. So is very very dangerous cutting the bottle with methods requiring a hot spot. The bottle could explode. If you need cutting, gas bottle must contain water.
n usou o mesmo motor q foi estaurado mas ta valendo
Para sa kin.... Tangke Lang ng freon.... Kabitan ko ng gauge at labasan ng hangin...bili ako NG electric na pambomba ng tire Para pangkarga ng hangin... Di ba ganun Lang ka simple Un?
What was the point of cutting the tank in half just to weld it back together? Makes no sense.
111111
Probably to make sure it was empty, also it was sand blasted and rusty, you don't want to blowing apart.
More chance of it blowing apart now, after welding it.
they cut for sure it clean to avoid rust stuck the piston and they call recondetion,fill new oil10 its normal have oil inside to smoth bearing inside
when you make compressor tank you need to insure that the tank doesn't have cranks or rust inside that may cause the tank to explode.
Sar ek mere liye bhi banaa do main Delhi se hun sar
Bizarre ! Pourquoi il a coupé le récipient en deux et juste après il les a soudés . Est ce que pour nettoyer l'intérieur ?
Quelqu'un m'explique .
Qabın köhne lehimine güvenmediyi uçun Kəsib yeni lehim vururku sızdırmasın
Tengo uno delos mismos compresores el motor tira el aceite al tanque de aire sale por la manguera
🎉🎉🎉🎉🎉🎉❤❤❤❤❤
אבל יפה מאד
잘구독해흡니다구매하시
Also no eye protection
אצלנו בישראל אם קומפרסור אוויר מיתקלקל זורקים הרבה כאלה יותר קל לתקן משומש מאשר לייצר מחלקים
нае бщ ик. вместо ржавого компрессора поставил другой новый. по покраске и шву видно 👎
Wonderful work, mastery and precision. But I have some questions. First, why did you split the Freon gas cylinder that would become the air tank? Even though you re-soldered it again? Secondly, what is the liquid that you put into the compressor? Did you push it out again or will it remain inside the compressor? Thank you for this great effort.
Esta bien como ejemplo, sé le agradece pero insiste truco no es el mismo compresor.
@@mariacardenas724No, by God, you do not understand what I mean. I am just exaggerating my admiration for the effort, good workmanship, and finishing in this work. I think the machine translation is the reason. Either I have it or you have it. I hope you believe me. I did not accuse you of any trick. I only asked you about the reason for the split in the air tank. Then I read one of your responses that you thought it had rust on the inside like it had on the outside. Thank you and I wish you success
tamamda ilk başta neden ikiye böldün
Cómo ejemplo sé le agradece, pero hizo truco el compresor no es el mismo.
Why would you cut the tank in half just to weld it again , 😂😂
Tidak bersuara, tenang dan bertangan dingin ...
आपली दुकान कुठे आहे.
Sorry, but i don`t get it, why you first cut it in half and then weld it together?
my question 2 great mines think alike
It's a ticking time bomb waiting to explode. It would be bad enough to use a rusted out tank as a pressure vessel, but cutting it in half and throwing welds all over it is just begging to explode.
That was my first thought to, only one word to describe this, Dodgy !
Muy bueno yo le pondría una valvula antiretorno entre el motor y el tanque así arranca liviano el motor