💡 Restoration Tig Welding Machine 200A Using Co2 // Restore Electric Welding Machine Control Circuit

Restoration Tig Welding Machine 200A Using Co2 // Restore Electric Welding Machine Control Circuit
Hello everyone, I have an old Welding Machine that I left behind many Months ago, and I restored it to its original state 95%. Please support me through Like Comments & Share Thanks 🙏🏻
+ Specification
- Voltage: 220V/1Phase/50-60HZ
- Rated input current: 20A
- Rated input power: 7.1KVA
- Welding current adjustment range: Tig welding 10-180A/ Stick welding: 10-160A
- Gas delay time: 0-10s Tig welding is used for steel or stainless steel materials with a thickness of 0.5-5mm/ 1.6-3.2mm rod welding (continuous welding of 3.2mm rods with 80% efficiency).
Dimensions: 430x168x312 (mm)
Weight: 8.5 Kg
+ Accessories
- Paint Remover = 3$
- Spray Color Cream = 3$
- Spray Color Black = 1$
- Spray Color Blue = 2$
- Mosfet TOSHIBA K2837 = 2$
- Panel Socket Welding 2 Goals = 5$
- Fan Guards = 2$
- ST-GT-01B 2 = 4$
- Gacun = 6.5$
- Rocker Switch 20 A = 5$
- Capacitors = 6$
- Total Money = 39.5$✔️
I hope you like it!
If you like it please Subscribe: bit.ly/3EaCNEI
#welding #tig #weldingtig #weldingmachine #co2 welding #dtrestoration #restoration

[@laserbeam002]

Excellent work. Keep it up. Thank you for posting.

[@cesar1pena338]

🎉🎉

[@takis12345]

👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@andymora5595]

Uff I didn't believe what I saw. Using a device in metal housing and the power connection is without the earth/ground contact. Never do this! It can kill you if you touch the metal housing of device! There are often capacitors in such devices which are installed between live wire and earth - if earth it not connected leads to high voltage on the housing.

[@dtrestoration8590]

Thank you very munch!!!

[@FAnywka]

Где УАЗ?

[@x84pav84x]

34:34 нарушение техники безопасности. Баллон с аргоном должен быть серого (чистый) или чёрного (технический) цвета, это делается не просто так, разные баллоны имеют разную толщину стенок. Вы же используете синий баллон, он кислородный. Категорически запрещено использовать баллон для хранения другого газа! Надпись на баллоне не верна, нужно писать Argon.

[@Rafaeldejesusbarros]

Using Welding machine without protection for your eyes 👀? 36:42

[@dtrestoration8590]

Thank you very munch!!!

[@anonymously241]

What is the top speed? 📻

[@user-gt9eg5up2d]

What is the cleaner used to clean the board?

[@user-lu4bp9en4c]

Опять "дрыставрация". Дедовский тестер, паяльник для выжигания по дереву. Прозвон вентилятора? Нах. Выпайка трансформаторов - ну блин. Промыть-покрасить это ж конечно дааа. Обычно или транзисторы в коротком или выходные диоды или бп. А в видео маловразумительная возня

[@JoseCastillo-om3jt]

Uams😅

[@neilhaas]

😊😊😊😊🎉🎉🎉🎉📟📟📟📟🔌🔌🔌🔌