1996 Yamaha G16, 36 Volt Electric - Replace Bad Solenoid
Вставка
- Опубліковано 16 жов 2024
- Welcome to Kevin's Golf Carts UA-cam channel!
Our Site - www.kevinsgolfc...
Twitter - / kevinsgolfcarts
Instagram - / kevinsgolfcarts
Facebook - / kevinsgolfcarts
I earn a small commission from each sale when you use the links below. Using my links helps support my channel but it doesn't cost you anything extra!
Amazon Store - www.amazon.com...
Patreon - / kevinsgolfcarts
Kofi - ko-fi.com/kevi...
PayPal - www.paypal.me/t...
Mattress Insider - goo.gl/rhQLMj
TubeBuddy - bit.ly/2okVnXe
Square - squareup.com/i...
MagicLinks - bit.ly/2nGHPEY
Tools:
Cat LED Flashlight - go.magik.ly/ml/...
DEWALT Grease Gun - go.magik.ly/ml/...
Diamond Gloves - go.magik.ly/ml...
Dremel 4300-5/40 Rotary Tool - go.magik.ly/ml...
GLOVEWORKS Orange Gloves - go.magik.ly/ml/...
Gummout Carb Cleaner - go.magik.ly/ml...
Husky 30 Gallon Air Compressor - go.magik.ly/ml...
INNOVA 3614 Compression Tester - go.magik.ly/ml/...
Milton 1/4" Coupler and Plug Kit - go.magik.ly/ml/...
Milton 1/4" High Flow Coupler - go.magik.ly/ml/...
Milton 1/4" High Flow Plug - go.magik.ly/ml/...
Milwaukee 1/2" Drive Impact - go.magik.ly/ml/...
Milwaukee M12 3/8" Ratchet - go.magik.ly/ml...
Milwaukee M12 12-Volt Battery - go.magik.ly/ml...
Milwaukee M12 Rivet Tool - go.magik.ly/ml...
Mr. Funnel AF3CB Fuel Filter - go.magik.ly/ml...
Neiko Impact Socket Set - go.magik.ly/ml...
Neiko Cordless LED Work Light - go.magik.ly/ml/...
The Ear Buddy Ear Plugs - go.magik.ly/ml...
Tek Motion Ultrasonic Cleaner - go.magik.ly/ml/...
Voltec 8W 500 Lumens LED Light - go.magik.ly/ml...
Camera Gear:
JOBY GorillaPod Tripod & Ballhead - go.magik.ly/ml/...
Manfrotto 496RC2 Ball Head - go.magik.ly/ml/...
Panasonic Lumix 12-60mm Lens - go.magik.ly/ml/...
Panasonic Lumix 14-140mm Lens - go.magik.ly/ml/...
Panasonic Lumix GH4 - go.magik.ly/ml/...
Panasonic Lumix GH5 - go.magik.ly/ml/...
Ravelli AVTP Professional Tripod - go.magik.ly/ml/...
SanDisk UHS II 128GB SD Card - go.magik.ly/ml/...
SJCAM SJ4000 WiFi Version - go.magik.ly/ml...
SJCAM SJ8 Pro - go.magik.ly/ml...
Audio Gear:
Galaxy Audio GT-V Lav Mic - go.magik.ly/ml...
Movo WS-G9 Furry Windscreen - go.magik.ly/ml...
Neewer Adjustable Mic Stand - go.magik.ly/ml/...
Pixel Wireless Lavalier - go.magik.ly/ml...
Rode NT1KIT Condenser Mic - go.magik.ly/ml/...
Rode VMPR VideoMic Pro - go.magik.ly/ml/...
Rode Microphones DeadCat - go.magik.ly/ml/...
Rode VC1 10' Extension Cable - go.magik.ly/ml/...
Samsung 32GB MicroSD Card - go.magik.ly/ml/...
TASCAM DR-40 - go.magik.ly/ml/...
Lighting Gear:
Dracast 400 Bi-Color LED Light - go.magik.ly/ml/...
Genaray SpectroLED Daylight LED - go.magik.ly/ml/...
HyperSelect LED Shop Lights - go.magik.ly/ml...
Ikan IBG-SB15 15lbs Sandbag - go.magik.ly/ml/...
Tether Tools 2-inch "A" Spring Clamp - go.magik.ly/ml/...
Misc Stuff:
Mpow PC USB Headset - go.magik.ly/ml/...
RAVPower 22000 USB Battery - go.magik.ly/ml...
PURE SINE WAVE Inverter - go.magik.ly/ml...
weBoost Drive 4G-X Cell Booster - go.magik.ly/ml/...
Disclaimer:
Kevin's Golf Carts cannot guarantee against unauthorized modifications or improper use of this information. Kevin's Golf Carts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Kevin's Golf Carts recommends safe practices when working with all tools, chemicals, lubricants, or any other tools or equipment seen or implied in this video. No information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Kevin's Golf Carts. If you are uncomfortable with replicating the actions used in this video, seek the service of a qualified professional. You have been warned.
Dude it’s very rare I find my problem this fast on UA-cam but you rock thank you
1 at a time for me, or I flatten the box and draw myself a diagram. Or, take a picture with my phone. Otherwise, I need experts like you. Thanks for posting.
This is tremendously more helpful than Yamaha’s wiring diagram. Question though, you addressed the two cables that share a terminal on the solenoid. One goes to controller, but does the other one go to the S terminal on the shift assembly?
hey kevin---i have a 96 yamaha golf cart when i first take it out will run perfect then it will just die on me and pushing the pedal i get nothing--with me holding down the pedal for awhile it would run again but usually i am sitting out in middle of fairway waiting for it to engage--any ideas
Looks like I have a bad solenoid. No resistor or diode on my Yamaha 36V is it supposed to be that way or did this lead to the solenoid failure. Bought cart used and have had for 5 years.
Hi again. Is there anyway to find a correct wiring diagram of battery hook ups on a 1997 G16 E? We need from the control box to the batteries and to the solenoid. This is our 1st electric cart. When we put volt meter on the 2 small posts of the solenoid and stepped on the gas, the meter shows OL. It also only shows 17.4 volts but each battery is showing at least 6 volts. Around 6.2 volts. Any advice would be great!
Kev got this unit no reverse yet buzzer sounds . No click at solenoid . She does travel in forward. Tubed fuses at buzzer area up under drivers side fender. Ideas ?
Yeah my Solenoid on my 2001 starts sizzling and pumping smoke when I hook up the main positive. I'm just gonna assume it's time for a new one
why did you not put a resistor on the 2 large terminals, just curious
Do you have a yamaha G9E solenoid video? This old girl had some wires hooked up in a way that I don't trust and some are already removed. I can send you a picture if you don't mind looking at it.
Why do you need a diode crossing those 2 smaller terminals?
If it runs but runs slow has two year old Batterys and new speed sensor do you think it’s the motor
Hello I have a Yamaha g2 got back from shop they replaced the solenoid I did not see any resistor on it and the golf cart moves but really slow now have any Suggestion
Do you have any videos of Yamaha 36 volt controller troubleshooting and replacement
Thanks
No. I don't really do a lot of controller swaps unless someone hooks one up backwards.
Where can I find the model year of my vintage Yahama 36v golf cart
Kevin do you have the solenoid wiring for a 1992 G9E? Please help
Hi I am retired lady that has a 1998 G16E- I am looking for a cable that goes from the solenoid and connects to the forward/reverse switch. I have had this cart 15 years and there is no one in my area that works on them. This wire over heats at the connection to the f/r switch. I have the part number and no one can find it. It may be a oem only. Can you tell me what the gauge of this cable is. I remember now that the last time I replaced it several years ago that I could go to a battery store and set one there. All the connections are tight. When it gets hot I get no power. I have to sit for a few minutes and it goes again. I appreciate any help as right now I can not take the cable to anywhere to to buy it. I am a high risk to the virus so am home. I can order one on line if it really is just a battery cable. On the yamaha blow out sheet it is item 32 Wire & JR1-H6527-00-00. I replaced the selinoid a few years ago when I replaced the burned cable. Now I have burned another cable. The f/w switch was replaced maybe 8 years ago. Thanks- Carla
I have power to the small terminals. Solenoid closes. But the cart still doesn't run. Also there is power on the bigger terminals
Possibly the brushes in the starter/generator are bad. You will have to check for voltage at the starter/generator.
@@Kevinsgolfcarts im have the same problem where the Yamaha electric cart wont move can it be anything else besides the solenoid ?
Put a new solenoid on and won’t turn wheels! Works if I jump across big terminals? Please help if any ideas!!!!
I tried arcing it and I nothing. Tried hitting the gas nothing!
Great Video Kevin, (changed my UA-cam name reflects my new channel) Start up the Patron. Lets people be more involved. If nothing else it gives you a way to share content with subscribers before the video hits UA-cam. Again thanks for the video.
Thank you for the feedback! I'm happy that you are enjoying my videos. They take a lot of work to shoot and edit. They also add a significant amount of time to the task at hand. Thanks again!!
922no tells where wires come from
Part number SOL. lol.