Jeep Gladiator EcoDiesel Willy's Build
Вставка
- Опубліковано 23 лют 2021
- This Jeep was built for our friends at White Rock Dodge. Check out more Jeeps like this at www.whiterockdodgejeep.com
Built by @EPIC-4WD: www.epic-4wd.com/ron-burgundy
Merch available at www.dirtyanddangerous.com - Авто та транспорт
Apparently the color is called SnazzBerry not Snazzleberry, my bad. :)
it has to be from Willy Wonka :). The snazzberries taste like snazzberries. Bad ass build
My buddy just got the eco diesel wrangler in snazzleberry. Had to have the snazzle.
@@charliehex ditto! Snazzzzzberry 4 life
last build everyone complained about them throwing the brand new stock parts. This time he purposefully cuts the clips so we don't see them throwing the parts haha
...thinking exactly the same thing
This mechanic is the most professional I've seen! He works on that jeep like it was his.I want a lift on my truck from that shop!!!
I almost feel like crossing the US and invading Canada to get an Epic built Gladiator!
I really don’t think there’s a better looking truck than a lifted Gladiator. Nice job
This willys is NOW MINE!amazing build and end result! I love it!
Awesome! Congrats!
What wheels did they put on it? Congratulations.
Good luck with your eco diesel I highly recommend deleting it after 30k miles where the ecodiesel is known to blow up before them, the egr in the ecodiesel is a soot monster and will cause you issues in the long run if you do not clean the egr enough, I'd recommend taking the egr tube that goes into your intake out every oil change and cleaning it to prevent carbon build up, I would just tune and delete but that voids your warranties and I wouldn't do that until later on because the ecodiesel is a problem engine from the factory typically once they make it to 30k miles they are not as problematic my eco diesel hit 100k miles didn't even make it 101k now its in the shop for a new motor because the soot build up was too high clogged my intake manifold and seized the turbo vgt vains now it has a rod knock from hell. Also make sure you document every oil change and keep receipts if you dont the dealer will try to pin a faulty engine on you, and if you do the oil change your self LET IT SIT FOR ATLEAST 15 MINUTES BEFORE ADDING OIL AND DRIVING IT SOUNDS STUPID BUT IT IS A SERIOUS THING WITH THESE ENGINES if the dealer or tech asks you how long you let it sit TELL THEM 30 MINUTES I highly recommend going into UA-cam and researching ecodiesel egr soot problems just to understand a little more
@@csanderson1320 this is a 3rd gen EcoDiesel with a completely redesigned EGR system. If you had massive EGR issues, you definitely have a 2nd Gen. Those were a bit of a challenge to keep happy, and I'm sorry you had that experience.
Quite a bit of learning from the 2nd Gen was incorporated into the 3rd Gen and approx 80% of the parts in Gen3 are new and different. I live in Cali and own a 21' Gladiator Rubi Ecodiesel, and there is no way a "deleted" Ecodiesel is passing our emissions tests. The biggest difference, and there are many between Gen2 and Gen3, is that the EGR pulls exhaust gases behind the DPF where they are both cooler, far lower pressure, and filtered (less carbon deposits) through the DPF. This is a game changer for this motor. Will this motor be more reliable?...time will tell.
Badass looking Jeep and sounds awesome!
I am starting to really dig these Gladiators
Me too
I'd totally get one if it wasn't built by FCA.
Me too, just because of Shaun and his channel.
@@Aggressive_Splooge Good news for you, it's actually built by Jeep.
@@groberts1980 I know right, they sing that ITS FCA song way too much jeep built the jeeps since the beginning and will never stop just because FCA is part of the company. Probably couldn't afford a jeep anyway.
Digging these build videos!
Beautiful! 🤩
I have the 21 Willys JLU 2.0T I love it. Took it in the woods tonight thing is a beast
Dam that rig is sweet !! Dream ride.
Those guys got that down to a science installing those lifts.
Another awesome built just under 6.5 minutes :)
Great video and hello from Puerto Rico 🇵🇷
Yeah !!! Beautiful gladiator🤩🤩🤩👍👍👍
As always a sweet build guys but I really like the looks of this one guys great job and a clean lift 👏
Love this video! 😉🔥
awesome build
I wasn't a big fan of that color but with the black grill, black wheels and black fenders i really liked it. Looks great!
Thanks for build video...finally see the fenders I want now 😁 beeeen avoiding the steel. These are SWEET!! Very NICE build good job EPIC
No problem 👍
Nice One!
As a Tacoma owner , I do love the gladiators but not stock, they definitely look a lot better with some big shoes !
Honestly stock they're kinda boring. Once you add a lift and 35" tires they look amazing.
Damnit I love this channel. Keep it up man!
Love that color
I couldn't tell for sure, but it looks like the gladiator with diesel option has cast knuckles instead of the aluminum that is in wranglers. Nice! I want a gladiator Willys Diesel. Then maybe throw in a front torq locker when they eventually release it for the front m210 Dana 44, or maybe an ox locker in front.
Sweeet... Nice Build
When u get to start your bday with shauns video and a cup of coffee 🔥
The Mechanic is Hard Working and Gets it Done and If I remember correctly he plays a Mean Guitar
Honestly the hardest part of owning a jt willys is getting rid of those bfg fires. Yes they are only 32 but they are great tires.
I'll be getting rid of mine when they are worn out...
Yeah i wouldn't change out those tires until they wear out. It's an awesome tire and size and the crawl ratio must be great especially in 4lo with the diesel. I'd probably invest in a front locker first. Perhaps an ox locker with quiet electric switch option (vs an air compressor or mechanical switch). I talked with marketing at torq lockers and they say they'll release a front torq locker for the front M210 Dana 44 that's in Gladiators later this year. That torq lockers would be most affordable and nice upgrade.
Great video. This is what I’d do to the gladiator.
Badass.💪👊
Beautiful build. I love that color! It's pronounced "willis" though, no apostrophe.
Good to know!
That guy is a machine.
Another great video, enjoy watching. I like the looks of the Willy's,
with the build they put on it. I hope the fuel is cheaper out in B.C.
Cause it is around 1.43 a litre for diesel, in Nova Scotia. There making
it hard to be able to play. Have a great week and be safe.
It's more than that here in southwest BC now. 1.45. Just went up again. It varies though, more in cities with higher taxes
looks great guys, may I know where did you get those fender flares from?
Very nice
That’s the Jeep I wanted. We got a 2012 in dark cherry pearl.
Amazing content 👌 keep giving the 🌎 the best adventure content This was some Amazing Modifications Skills Bring the fun to suck a Great jeep rule We love it Strong
Beauty
Holy Snazzel Bury 😍😍😍😍
Hey we're getting old lol . Spelling , Eyesight , Hearing , Wrinkles .White or Gray hair .
I’m keeping mine stock. They do look cool lifted though.
Same here: 2021 Gladiator Willys ...
What do you cut off on what looks like front end
Lovely build !!
Whats the name of the 1st song btw ?
Damn i want one
Questions! What's the obsession with 37s? Is there any interference with stock front drive shaft during max or even moderate articulation? I've heard there is. So an aftermarket front shaft is a better option. Also I'm looking at a 3.5 kit with 35s hence the first question. Thanks. Great video.
How long does it take to do this transformation? Is it done within a day?
did i see this in port alberni the other day??
Love the cutter. Details please :)
Amazing build I would like to recreate this 3.5” Teraflex lift, you guys put out some great builds. Do you happen to know if you all installed the Teraflex rear trackbar relocation bracket and the Teraflex front and rear HD trackbars or were the stock used.
No reply,means the stock items were used.
Hey guys, what kind of headlights did you guys get for this build, a link would be appreciated. Thank you!
👍
Do these need alignment after the lift?
Definitely
Dont you usually have to re-gear when you go to 37s? Love these build videos though, would love to see more
ive seen a few jts with stock 4.10s running 37s, i think if they have the 3.73 they would for sure have to
Chipped to recalibrate
@@greglevasseur802 the speedometer sure but hardly the gears needed in the pumpkins.
That is so fucking cool!!! I’m so jealous🥺🥺
Wow
Hey random question! Love this build. I myself have a 2020 Rubicon Gladiator. I currently have a 3.5" lift ordered and looking at maybe going to a 6" lift with 37's. My question is, have u guys seen anyone go with that that much lift and wheel the truck? And if so can u point me to them if they have a youtube or anything I can look at? :). Secondly, how were those fenders? I was looking at getting some for my gladiator as well. Thanks guys! Love the channel
You don't need more than 5" lift for 37s. 6" is going to require additional modifications. Unless you want to run 40s, I wouldn't go that route.
@@TheStoryTillNow Right now I have a front driveshaft for it and full set of arms. Other than that, what other mods would be required for a 6" lift? Would 6" be to tall to wheel or is it more for the additional mods?
@@DirksDiggler
Get a Mopar lift and toss some 37’s under it, and you’ll be better off in the long run.
How much for a build similar to this on a gladiator sport?
You'd have to give Epic a call.
My Willys diesel gladiator has been on order for 6 weeks....hopefully March 10th it will be here. I already have Metal Cloak 3.5", 37s, Rugged Ridge stubby with badlands apex wench, waiting.......
Aren't you worried on putting 37s on front dana 30 axle?
@@michelebarzan comes with heavy duty 44s with diesel ;)
@Paul Nobert I feel your pain brother.
@@Digifx69 oh nice. I’m thinking about selling my jk and buying a gladiator diesel!
What’s the approximate cost of the lift, tires and fenders?
Give Epic a call they can work up a quote for you.
@@TheStoryTillNow Sure. I live in Florida. I was just curious.
I think I saw this truck parked outside BCLS in Whistler.
Mannnn, it must be nice doing a lift on a brand new vehicle ... all the bolts come off!
Does epic have the falcon 3.3 in stock ???
You'd have to give them a shout and see.
@@TheStoryTillNow I’ll do that. I can’t find them anywhere
Wasn't a fan of this color until this custom rig.
dude !!1 you drive past my work all the time. and the vehicles I see from epic is awesome. wonder if they would ever work on Suzuki's haha
I want to build an eco diesel so bad but I’m terrified on how much it will cost me 😅
That was a nice use of a torque wrench on that build....I forgot how many tacka’s it is per ft/lb
I am not a fan of the powered wrenches whether battery or pneumatic. Ok for disassembly but not for assembly in my opinion. You don't know if it is tight enough,, too tight or on the verge of stripping.
Should I trade my JL for one of these monsters ?
As an owner of a Willy's I disapprove of the use of Willys for this. (tongue in cheek), But it is a sweet Jeep for sure.
Video Title -
How to INSTANTLY void your factory warranty!!!
Rich people problems for sure
Can somebody please tell me what axles come with the ecodiesel sport models of the Jt cause I'm considering trading in my gasser rubi jt and get a sport ecodiesel cause I already have parts that would basically make it a rubi,I just need confirmation on what axles the sport ecodiesels have cause I want to know if they have beefier axles like a Rubicon
Dana 44’s. 3:73 gears.
Faulken Aay. Is this the Canadian version. Faulken Aaaay. Is Casey actually the ginger in disguise?
Hi
I can't drive manual
The automatic is standard on the diesel and optional on the gas version.
Honestly would love a new Jeep but I’m so disappointed you can only get the manual in the 3.6l, and if you do the tow rating goes for a shit, WTF starting to think I’ll have to look a used vehicles to get what I want
Is that in Canada? We have the option of Auto or MT on the (3.6) here in the U.S...
First!!! love the vids
Good looking mall crawler
Its pronounced Will·Iss not Will·E's...
If people actually knew that it was the last name of James Willys for whom the original company was named a hundred years ago they may pronounce it correctly...or maybe not.
@@thomascalton3067 'John North Willys'...
Will e's
All JEEP RUBICON look ugly unless you make it look good.
Jeep Stock is not good to see it was sore to my eyes.
You had great music now your playing raunchy music. WHY! You reach 100,000 subscribers why change. The raunchy music is like by your youngest viewers who have no money their still living with their parents. I’m unsubscribing until you bring back that great music. Northern Expeditions has great music 🥱
I use different music in every video. I use what I like, and I don't live with my parents. ;)
Im unsubscribing bcoz i hate googles ad b4 the video grrrrr😤😤😤😤
Bye Felicia....!