Hello Leon, you can contact me at tomsmusicshop@gmail.com if you are interested. Asking price is $799. Thanks! By the way, I have tuned up the instrument to get all the tremolos working.
Hy, man, you are helping me a lot, tks so much. I think that happens the contrary of that you said from 11:22, the beats get faster as the frequency get closer
@@TomsMusicShop odd, I've been using beats for 20 years for tuning my guitars and I always listen the beats become faster as the two frequencies get closer. I'm confused now 😅, I'll study it in my acoustics manual next week. Best regards 👍
Hey I need some advice on my acordion sound doesn’t come out on pull.. I’ve already tried to check for dust or debree.. but it does have sound going in
Well, it could be other things. If the reed tongue is too far from the reed plate, or too close, it will also not oscillate. Or, it could be somewhat crooked. Try comparing it to working reeds next to it, and see if you notice any visual anomalies.
I have a question. I have an accordion with a sixteenth note in the channel. The voices are clean, without corrosion, while the 16th note in the channel has corrosion. Is it possible to clean them and how could they be cleaned?
Hello and thank you for sharing. How do i know what frequency to tune in for each side of the reed block? Will the tuner automatically adjust to the need of the reed?
Hi Omar, one side needs to be at about 0, while the other side needs to be between 10-30 cents higher. It's a bit of an art. Maybe you can find a local accordion tuner to help you?
Hey Tom! Thanks for this video. Turns out I have two reeds that have snapped and are no longer there. I have no idea how to order a replacement I can’t find out online. You have an email to talk?
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Excellent video! I appreciate the detailed explanations. (Especially using what I assume is appropriate nomenclature!)
There's a newer type of Tuning Table which runs on Electricity & because of the fan it might help remove the dust faster.
Beautiful rare instrument. I’m very interested.
Hello Leon, you can contact me at tomsmusicshop@gmail.com if you are interested. Asking price is $799. Thanks! By the way, I have tuned up the instrument to get all the tremolos working.
Tom's Music Shop is it here in U.S.? Ebay listing says it’s in Germany.
I’m Leonel Pulido. I bought the white Hohner Corona III R. Remember me?
@@elleon8170 Yes, I work out of Germany. That is why I can source these instruments.
Hy, man, you are helping me a lot, tks so much. I think that happens the contrary of that you said from 11:22, the beats get faster as the frequency get closer
Nope, they actually get slower….
@@TomsMusicShop odd, I've been using beats for 20 years for tuning my guitars and I always listen the beats become faster as the two frequencies get closer. I'm confused now 😅, I'll study it in my acoustics manual next week. Best regards 👍
Hey I need some advice on my acordion sound doesn’t come out on pull.. I’ve already tried to check for dust or debree.. but it does have sound going in
Well, it could be other things. If the reed tongue is too far from the reed plate, or too close, it will also not oscillate. Or, it could be somewhat crooked. Try comparing it to working reeds next to it, and see if you notice any visual anomalies.
I have a question. I have an accordion with a sixteenth note in the channel. The voices are clean, without corrosion, while the 16th note in the channel has corrosion. Is it possible to clean them and how could they be cleaned?
What do you mean with 16th note? You can scrape off the oxidation to an extent, or try a little rubbing alcohol. You may need to tune, though.
Where are you located
Hello and thank you for sharing. How do i know what frequency to tune in for each side of the reed block? Will the tuner automatically adjust to the need of the reed?
Hi Omar, one side needs to be at about 0, while the other side needs to be between 10-30 cents higher. It's a bit of an art. Maybe you can find a local accordion tuner to help you?
Hey Tom! Thanks for this video. Turns out I have two reeds that have snapped and are no longer there. I have no idea how to order a replacement I can’t find out online. You have an email to talk?
I do! But you will have to order from Hohner, or maybe eBay. Measure out the size in length and width, and be sure to order the correct octave.