Did Gerry just say the JD 3650 has him broke!! I rest my “CASE” 😀. That wheel trolly is a mighty job 💪 the more good tools a John Deere owner has the better 😉
Hi Gerry, Great video as always. Really love all the attention you are giving the tractor and nothing sparred, expensive I know🤯🤑 but all very much worth it in the end. Previous owners mustn't know there was a brake pedal on it 😂 can't believe that the discs are so good, 🚜👍
I know. It’s worth it though. You never know with a tractor what it’ll be like unless you go and check this stuff. I think the tractor was in big fields. Paint is all still on the brake pedal. It was never used.
good morning from Italy. congratulations for the videos well done! always very useful! I wanted to ask you a question. I have a 3130, I have the transmission filter often clogged with metal dust. Could this be a sign of worn brakes? once the filter has been replaced, everything works for about a month. then the same problem. I don't understand where so much wear can be. 😕
Good video Gerry 👍 can understand u not replacin the brakes don't know once cab etc was back on tractor how long the job wud take but doesn't look to bad🤔 how's the calf that had the crypto doin hope it's thrivin 👍👍👍
1 solid day would do the brakes with the cab on,cab would have to be jacked on the back etc and all spool linkages,throttle,steps etc taken off but not an awful big job
Great video , ye can’t beat an in house mechanic . These projects always grow a bit & original parts are sometimes mega expensive . £600 euros for brakes , it’s a mask they should be wearing HAHA 👍🏻🏴🚜
Always good to have brakes😂 That wheel carrier is good if you justify the cost last time I took rear wheel of I used the mchale bale squeezer and could turn the wheel on the rollers to line up studs Great mchale machine's so versatile 👍👍
I was often impressed seeing those wheel jacks in dealers yards. (if that's what they're even called!), wheel trolly? wheel jockey frame? Answers on a post card... 😊
If you ever do change the brakes in her go for genuine jd discs,we tried spurious ones before and the pedal wasn’t pressed 20 times since they went in and they where moaning etc,stopped the half axles during the winter and there has been no problems since and a brilliant pedal,Padriac dywer for discs ,gaskets etc came to just over 400,you should give him a try for bits for your jd
Yea it’s hard to beat genuine parts in the like of brake disc’s. I didn’t see the point in changing when they were like new. Where’s padriac Dwyer based
@@gerry6420 kilconnel county Galway,he’s a mastermind when it comes to John Deere’s,especially the old 30,40 and 50 series Deere’s ,there isn’t a thing he doesn’t know about them and there isn’t a part he can’t get or wouldn’t have on the shelf for them
I fully agree..i have gutted the transmission and gearbox in a 3050 and got everything off Paraic Dwyer..waiting to slide the 2 halves back together..if i can get a couple of hours..🤣
@@callumconnolly25 30k..and i have no intention of changing it..i use it sometimes pulling my own 13t digger and it has massive torque..its also a turbo engine..
Did Gerry just say the JD 3650 has him broke!! I rest my “CASE” 😀. That wheel trolly is a mighty job 💪 the more good tools a John Deere owner has the better 😉
Tá tu funny
Haha hiding away ready to pounce 😂👍
You got a nice shout out from sealey tools today, it's a handy tool if you are putting doubles on and off the tractor regularly
Yes I seen they shared my picture. 👍👍
She’ll look well when she’s done. I’d say you’ll be glad to get the silage done. The weather of late has been bad
It’ll be a mighty job alright. Be glad to have it done alright. Hopefully weather holds up. 🙏
Hi there Gerry. Farmer Phil sent me over. Have a good week.
Hi Alice.... good to have you here 😁👍
Hi Gerry,
Great video as always. Really love all the attention you are giving the tractor and nothing sparred, expensive I know🤯🤑 but all very much worth it in the end. Previous owners mustn't know there was a brake pedal on it 😂 can't believe that the discs are so good, 🚜👍
I know. It’s worth it though. You never know with a tractor what it’ll be like unless you go and check this stuff. I think the tractor was in big fields. Paint is all still on the brake pedal. It was never used.
good morning from Italy. congratulations for the videos well done! always very useful! I wanted to ask you a question. I have a 3130, I have the transmission filter often clogged with metal dust. Could this be a sign of worn brakes? once the filter has been replaced, everything works for about a month. then the same problem. I don't understand where so much wear can be. 😕
Great machine in there day! my father had a 3050 used to do a power of work with it.
Great video gerry good to see the progress.
Thanks Layton. Yes we’re going well
Super stuff Gerry, ye are some men around machinery
sometimes 😂
Brilliant video Gerry, thank you 👍
Thanks Alex 👍
Good video Gerry 👍 can understand u not replacin the brakes don't know once cab etc was back on tractor how long the job wud take but doesn't look to bad🤔 how's the calf that had the crypto doin hope it's thrivin 👍👍👍
1 solid day would do the brakes with the cab on,cab would have to be jacked on the back etc and all spool linkages,throttle,steps etc taken off but not an awful big job
Cracking video. Used your code for some a brilliant head torch. Thank you
Great video , ye can’t beat an in house mechanic . These projects always grow a bit & original parts are sometimes mega expensive . £600 euros for brakes , it’s a mask they should be wearing HAHA 👍🏻🏴🚜
Always good to have brakes😂
That wheel carrier is good if you justify the cost last time I took rear wheel of I used the mchale bale squeezer and could turn the wheel on the rollers to line up studs Great mchale machine's so versatile 👍👍
Hard to beat finding machines are useful for other jobs too 😂
Agri gear does a fantastic job on the wheels
I was often impressed seeing those wheel jacks in dealers yards. (if that's what they're even called!), wheel trolly? wheel jockey frame? Answers on a post card... 😊
Wheel trolly. I’m very Impressed with it. Should have had one years ago.
Brake discs can look perfect, but could be gone hard,would have changed them if I were u,
Buen video , si no tiraras los tornillos y las herramientas al suelo , los pusieras ordenados en una mesa de trabajo estaría súper ok.
If that was your Dad working with you Gerry. He's seems to know his stuff.
It's peter
Awsome video Gerry it will be awesome tractor 🚜 when it is finished 🦌🦌👩🌾👩🌾👍👍🏴🏴🇬🇧🇬🇧🚜🚜👌👌
How ya.
What is the name of the company that is anodising the bolts for ya?
Thanks
When you gonna show video on cattle
She’s going to be some job when she’s done
The one thing is that she’ll always start unlike other certain red makes……
Great video Gerry.
Great video again
Thanks Craig 👌
Very impressive !! you boys don't hang about. You will be getting an offer of full time work if anyone from John Deere is looking in!!
If you ever do change the brakes in her go for genuine jd discs,we tried spurious ones before and the pedal wasn’t pressed 20 times since they went in and they where moaning etc,stopped the half axles during the winter and there has been no problems since and a brilliant pedal,Padriac dywer for discs ,gaskets etc came to just over 400,you should give him a try for bits for your jd
Yea it’s hard to beat genuine parts in the like of brake disc’s. I didn’t see the point in changing when they were like new. Where’s padriac Dwyer based
@@gerry6420 kilconnel county Galway,he’s a mastermind when it comes to John Deere’s,especially the old 30,40 and 50 series Deere’s ,there isn’t a thing he doesn’t know about them and there isn’t a part he can’t get or wouldn’t have on the shelf for them
I fully agree..i have gutted the transmission and gearbox in a 3050 and got everything off Paraic Dwyer..waiting to slide the 2 halves back together..if i can get a couple of hours..🤣
@@tomzeedee is she 40k or 30k pack in her?
@@callumconnolly25 30k..and i have no intention of changing it..i use it sometimes pulling my own 13t digger and it has massive torque..its also a turbo engine..
👌
Where abouts do you get hold of the engine speed sensors,failing to find one for a 3050
I ordered one from my John Deere dealer
great video as always
Well Gerry, soon be j.f time !! 😍😍😍
Going to have it out later today. I will post a teaser pic for you😂
Lot of money to spend on an old machine.
She’s worth a lot of money. I’ve been offer 6k profit on it since I purchased it last November. Of coarse I declined 😅