CADDY 2K BKD - engine swap - build series conversion Ep9
Вставка
- Опубліковано 5 жов 2024
- what is going on guys is time to do the Caddy bkd swap , someone bought the old engine so now is the time for the build series.
I was hoping it was a plug and play engine swap but I ended up having to do a few wire changes.
There's a few different fuse box's so if yours is the same as mine hopefully this video is of some use. I'll include a full pin out of what I done to get the BKD running in the caddy 2k.
#caddyconversion #caddy2k #buildseries
Glow plug wiring swap using caddy fuse box
Red with white 6mm T26/1 to T40/4
Black with Yellow 0.5mm T26/3 to T40/26
Black with Red 1.0mm T26/6 to T40/21
Black with Grey 0.35mm T26/4 to T40/6
Carlsberg don't do engine removals, but if they did, they'd probably struggle to beat that. Great work as usual DT
Karter I always remember certain comments and that is way up the list 👍👍 thanks mate. Pinned to the top of comments 😊.
Top guy 👌
Ooh yeah
Your videos are like a broken drum kit!…ya just can’t beat them 😉👍
Thanks mate appreciate that 👍
Great video. You did well working on the fly. Lucky you never caused any damage with the Touran fuse box. Engine bay and engine clean came out sweet, I like your attention to detail, the mark of a true craftsman. 👍
Thanks Phil appreciate that. Yes your right the touran fuse box literally fit but was configured completely different so other things wouldn’t have been happy. Thanks for the comment 👍
What a work of art mate, you really smashed it out the park.
Hey Nigel thanks buddy 👍 I thought it was plug and play when I started then got neck deep in wiring 😩.. was a happy bunny when it started and run good.
No Nathan you did a top job there sir, that van is gonna be one of a kind when done.
Thank you for the video. Great job you did there as always. Incredible to think what you've done and achieved on the Caddy in such a short time 💪👍.
Thanks Karl appreciate that mate 👍👍 yes it’s definitely a completely different van now, I look forward to using it daily.
Great work buddy.....I looked at doing one of these.....realised the loom was different bottled it and went Pd from bls....superb logical progression..
Hey bud thank you 👍👍 my first thoughts when I brought the van was to just put a better PD in it but after owning a golf with the BKD i had to do it. Then finding the touran the deal was sealed.
you are sent from heaven sir. ive been strugling with ATD TO BXE CONVERSION
Yep excellent work, thank you for giving me something interesting to watch on a wet cold evening!! Peace 🙏✌️
Thanks Simon 👍 always appreciate what you have to say. Thank you for always watching👍 enjoy your evening.
@@YTDTETV You too bud take care ✌️
Looking at some drawings...the yellow twisted wires you pinned into the ECU large socket is for the Throttle pedal position...they are the same on the caddy T94 plug
You definitely know your stuff, mate. What a talent excellent.
Hey Chris thank you mate really appreciate that 👍
I might be doing a blb to bkd swap on my a4. I hope its not as hard as this. You really know your stuff with the wiring! 👍👍
Hey bud thank you hopefully the video helps a little 🙏👍
Fantastic video mate. I've got a 1.6 Caddy. Bought a crashed damaged Touran as a doner. Planning to take the 2.0 TDI from the touran and put it in the Caddy. They're both DSG, so hopefully won't make things too difficult 😂
Thank you bud 👍 good to have a donor motor rather than buying desperate bits. Oh I do like a DSG very nice.
I like the way you operate nathan. Clever guy
Hey Paul thank you sir appreciate the kind words 👍
Another video showing the immense skills and knowledge of Nathan @DTETV Oh Yeh 🎉😊
Thank you mate appreciate that 👍
some man for one man, fair play bud! Alot of wiring torture, good to see its running like a gem 👍
Hey Darren thank you bud appreciate that 👍👍
Saturday night fever my man. Going to enjoy this😊🇳🇴
Thanks Franis hopefully it’s a good watch 👍👍
I put an ARL 1.9TDI 150BHP from mk4 Golf in a Caddy, I also had an BLS before, only thing u have to modify is the crankshaft senosr, everything else is P&P, as a turbo I used an 2.0TDI BMM 140bhp turbo is P&P on the 1.9tdi engine and The dpf v-band also is P&P on that turbo from the bls exhaust.
Yes the 8V swaps are straight in except the crank sensor as you say, I was going to go down that route but much prefer the 16v PD engine.
Another brilliant video you am a very talented man.i would of gid up with the wiring. What a van.
Thanks mick really appreciate that 👍 when I started I thought it was plug and play with the ecu but nope 😂.
Just stumbled across your channel mate. Proper legend!!👍🏻👍🏻👍🏻
Hey Andrew thank you glad you found the channel mate appreciate the kind words 👍
Nathan
Wow u smashed that one sir hats off to you fantastic
Thanks Carl appreciate that mate I’m really happy with it, just need to lower it then I’ll be using it finally.
About to swap a blown Audi BLS with a BKD from a Golf... The wiring seem to be of an issue for sure! Especially that the wiring diagram resources suck for VW's
Love your work Nath, when cleaning engines and bays , do you take care with electrics etc? Or just blast away with the pressure washer? Id be bricking it ! 😂 Love these videos 🤯
Hey bud thank you 👍 on a diesel engines I just blast away with the pressure washer but if there’s a fuse box I just lightly wash round that with a petrol engine avoid the top of the engine as that’s normally where the spark plugs are and they don’t like to get wet 👍👍
My brother has decided it would be a good idea to pull his 2011 cayc 1.6tdi and fit a bkd from an 04 Mk5 golf GT TDI.
Engine is physically bolted in place and I am now looking to start the wiring.
We have a similar fuse box to you but have different map sensors dpf sensors etc etc.
I've depinned Pin 13-30-51-63 and an earth (pins 1-4) from the glow plug relay and bkd ECU plug.
Pin 13= brown/yellow-vac box
Pin 51= black/grey-fusebox
Pins 1-4= brown/glow relay earth
Pin 30= purple/yellow- glow relay
Pin 63= purple-glow relay
I've fitted the thick red/white directly to the caddy fuse box, but I'm not confident where to cut for the other three wires you have, am I cutting them completely out splicing in place of the original glow relay?
Yellow/black splits to relay and the loom after the fuse box for example.
I've still got a red with black tracer that comes from the engine loom through the plug to the glow plug/ecu loom then goes up to behind the wiper motor (caddy doesn't have this) where is this connected to?
Also because the later van has a 3pin maf sensor I need to rewire the four pin bkd plug into the existing loom
The wires from ECU are
Pin 40= black purple tracer
Pin 60= green
Pin 82= black
There is 4th wire it looks like a black/brown wire from the old fusebox I am not sure where it is from.
Edit: came back to this this morning
I've mislabeled the black/grey from glow plug to ECU, I could have sworn it was pin 51 but that has a thick white blanking pin on the bkd and caddy plugs😢😢
So I'm questioning whether I've identified all the pins correctly when removing them from the bkd connector.
Nice turn around on getting the bkd done, show & go now
Thanks Martin I was happy with the instal 👍👍
On that wiring IM OUT 🤣🤣🤣
Smashed it dobtech as usual 👍🏼
Haha go on big grin.. thanks mate 👍👍
Great job mate 👍🏼I did a similar swap but done sdi to bkd, took me ages to work out the n75 wiring and maf but got there. Just put a jw1856 turbo on. Still having issues with power steering but think it wants coding in
Hi bud thank you appreciate that 👍 when you say power steering issues.. what’s happening have you got the steering wheel light on? I had issues but managed to sort it I might be able to help.
@@YTDTETV hi sorry for such a late reply, yeah even though I sent the ecu, clocks and key off to get coded I’ve still got no power steering. Not sure if I need to code it in or what
Great video as always love that caddy keep up the good work take care stay safe from Richard in Cardiff
Hey Richard thank you sir, have a nice weekend 👍👍
I have just done this conversion and this video has helped me so so much. Thank you so much!
I’ve only got one fault code left to solve in vcds and that’s a/c pressure sensor open circuit. It’s a 3pin plug on the left hand side just below the drivers headlight, one is earth and the other 2 disappear into the dash behind the brake servo.
Did you have a similar problem with yours? Mine is the same spec as yours (a/c, electric windows, heated mirrors, fog lights from factory) I also still have the doner touran incase I need anymore wiring/plugs
Any help would be great! Thanks 👍🏼
I have completed the swap of bls to bkd with golf front suspension. Ah yeaah
Well done mate I absolutely love the BKD engine. Enjoy 👍
Well done buddy its really coming on
Thanks Jason 👍 I’m really happy with it and looking forward to using it.
great knowledge here you make it look easy, thanks so much for this, really helpful!!
No problem mate thank you appreciate the comment 👍
You really do need to up sticks to the North West fella 😉 could do with a local "specialist" I could trust . As always, amazing work on the project... that loom looked a bit of a nightmare. All in a days work for Dobo 😎
Thank you sir appreciate that 👍👍 if I ever up sticks to your way I’ll be on the blower to let you know I need a new customer. Wiring was a little full on but if you take your time and work stuff out it made it easier.
Amazing work
Thank you 🙏
Very entertaining and informative series mate. When you changed the engine do you change the gear box and transmission too as you went from a 5 speed to 6?
Problem solving champion, loving the video bro. 🎊 🎉
Thanks sham appreciate that mate 👍👍 how’s the water leak?
@@YTDTETV sent you PM all sorted though thanks 😊
Norton Disney is only 30 minutes from me if I'd known we would of put you guys up for the night
We drove through or near Grantham I thought of you on the way past mate 👍👍
Looking at doing this to my 2.0 sdi was wondering if your caddy came with the coolant gauge on the clocks as mine dosent have one so wondered if you changed the clocks aswell? Loving the Chanel and especially the caddy
Great video buddy. Keep them up. Did you manage to find out what the B/R wire was connected too ? It is shown in your video at 18:27.
Thanks buddy 👍👍. No that red/black wire is still not connected and I’m struggling to get the steering light to go out. I wonder if they the wire and and the steering light are connected. I’ll update my pin out when this last problem is solved.
@@YTDTETV No problem. Ah ok, thats a bit of a pain in the arse 😐
Can you tell me what colour the 7 wires were that you used on the touran loom that you unpicked ?
The wires I am on about are the wires that you used on the new loom to the ECU ?
One wire was Shudder valve, the other was an earth.
I couldn't make out colour of the other wires you ran from T14 Connector to ECU.
Any joy with pin out mentioned above buddy ?
Hello ?
Is this chat still active ?
Nice one mate I'm doing the same to mine as everyone who u speak to don't want to tell u nothing or it cost to much not only that I'm looking to do a 2.0 bkd dsg swap
Thanks bud 👍👍 you are so right no one wants to share info on this sort of conversion I messaged a few people with no reply. Hopefully the video helps someone out. I will do a full pin out in the description in a couple of days.
No problem mate I will keep my eye out for your wiring loom diagram
@@YTDTETV hi mate do u have the wiring diagram mate and where abouts are u I'm in Mansfield
Well done mate, you have patience and perseverance that most people don’t. I certainly don’t have it! What are benefits of the BKD engine to make it worth the effort? 6 speed gearbox obviously. Is it a more robust, more tuneable engine or what?
Thanks B-ry, doing involved keeps me sane. When your mind is busy you don’t have time to think of unfixable problems. So the (pre common) rail 2.0 pd BKD is the next engine to the famous 1.9 pd, it’s 16v rather than 8V and is more refined. It’s a quieter smoother engine and the BKD is know. For it’s harder torque punch, after owning the golf and having the same engine I absolutely love them. I’d put one in every vehicle I own if I… (could be bothered) 😂.
Top stuff Nath ...🙂
Thanks Luke appreciate that 👍👍
Quality stuff man! I got a 2l tdi 138bhp model, what do I do to get the turbo sounds😂
Hey George sorry for the delay, if you want turbo noise from the exhaust then it’s a case of making the exhaust free flowing, decat or straight pipe. If you want turbo sounds from the engine you need a decent air filter 👍
Hi bud,great work. Just a question, does the side shafts from the caddy fit straight on or did you use the doner vehicles? Thanks
I used the touran drive shafts 👍
🤙🏼Thank you for responding
Mate I wish I had your experience and knowledge when it comes to this…. I have however got 20 years experience carp angling if you ever wanna know anything haha 🤙🏻
Thanks mate 👍👍 haha I need some Fishing experience for sure, are you on our other channel OUTDOORDTE video of our latest trip will be up on there in a few days.
@@YTDTETV when I take out my shitty CAYZ out I’ll give you a shout and repay you with angling knowledge haha 👍🏼
@@MrSnypz1 oh mate that’s a common rail isn’t it? I see so many broke ones on the Facebook forums, injectors etc. it’s either PD130-PD150 or the BKD PD140 for me. All great engines but the BKD is more refined. Drop a comment if I can help 👍
@@YTDTETV it is mate yea, luckily it’s got the newer injectors in it so they shouldn’t be a problem, and it’s only got 50k on it so the sooner I get a pd150 in it the better haha.
@@MrSnypz1 good miles 👍 you’ll get a few quid back for your engine might even pay for the complete swap. Is it 5 or 5 speed? I’m not a fan of the 5 speed. Wiring looms on the newer ones are very similar to my early one to so it’s a very similar process. Engine will bolt straight in the just a few evenings playing with wiring.
Cracking vid mate besides the mirrors of the touran what else do you have planned for the van.
Thank you bud appreciate that.. plans for caddy are lower it 60mm front able flip rear. Mirrors, side skirts, spoiler. Future plan it’s mk7 golf front bumper. I also want it to go well so GTB1756vk turbo with FADR 2.2bar remap. Oh and I need to carpet line inside the van.
Hi mate great work there I’m doing first bls to bkd conversion wondering what you done with the power steering from hydraulic on bls I’ve got a golf gt tdi and it’s electro? Cheers
Hi Dean thank you 👍 my caddy was electric steering so super easy on mine, it is an easy English thing to replace your power rack with electric one.
Hiya mate....what did you do with the throttle pedal CAN wires (twisted brown and yellow)....cheers Martin
Do you do engine swaps as a job ? Ill be buying full donner polo gti , loads done to it sitting at 360bhp so far ill be buying it to go in my caddy.
Won’t sell the touran front bumper off the silver Ono 😂 great videos mate
Haha nope that front bumper was held on with wood screws and cable ties I wasn’t taking any care while removing either 👍👍 thanks for comment 😊
@@YTDTETV no worries mate,keep up the good content 😁
Hello bud. Iv been glued to your videos for inspiration. Iv got a 2013 c20 1.6 tdi I want to swap it out cos I’m in desperate need of more power. What engine would you recommend I.e simplicity for electrics and getting good gains from modifying. The van is ready to go with coil overs, flipped axel s3 front breaks gti rear etc etc.
any wisdom your able to share would be amazing. 🤙🏻
Hey bud thank you appreciate that 👍, any engine swap in a caddy is virtually the same all the other Vw engines bolts straight in it’s just a case of the ecu and wiring loom that’s abit more involved. I’ve seen on the forums people getting a dpf delete and re maps running 200hp on the 1.6’s.
Appreciate you taking the time to reply. Iv been looking in to what can be done with the 1.6 may end up going down this route to start with before going all out and spending 💷💷💷
Fantastic work. Can I ask you what is the noise after you change gear on boost? Kind of like a higher pitched blowing/expelling air noise. Mine does the same and I’ve always wondered what is was. You can hear it on your test drive at 29.36 and right after you say I’m out at 31.59 cheers
Hi bud thank you 👍👍 after accelerating the turbo has spooled up then as you let off the throttle the turbo vanes (wastegate) closes and let’s all the turbo noise (from spinning fast) out of the exhaust. Petrol turbo cars make a similar noise out of the dump valve in the engine bay. Vrooom tishhh.
@@YTDTETV Thanks for the explanation mate.
Hi mate, great work! Can I ask a quick question, I've done an Sdi to BXE with a vac box and got that running by tracing wires back to the ecu and re pinning. So I should imagine if I just followed the pins in this video for a bkd I'd be somewhere near? Cheers
Hi Darren thank you appreciate that, yes if you have a vac box it should be similar if not identical. As you say just trace them back to the ecu and repin what you need if I remember rightly I think I only had to repin 3 out of the 5 wires 👍
What ECU did you use, and was any coding required to get the engine working?
Alright mate great work I done a bls to bkd and brake lights stuck on and fule pump problems and idea the bkd was out of a audi a3
Hi bud did you used the touran fuse box?? I did at first and my brake lights where stuck on. I ended up using the caddy fuse box and wiring the glow plug relay into that
I used the audi fuse box, have you got snap chat r23eky bit easier to chat
@@R23EKY. I don’t do Snapchat sorry bud.. that’s your problem with Audi fuse box it’s wired different inside i’e the pin out etc. I explain exactly this in the video. I first used the touran box and it ran but electrics on the van wasn’t happy and brake lights stuck on, I then fitted the caddy fuse box back in and wired the glow plug relay into the caddy loom.
I'll change it back to the caddy fuse box and see for wiring the glow plugs up do u just remind the same colours
@@R23EKY. yes.. the main massive t40 plug that’s underneath the fuse box the one that comes from the van that’s where you need to swap the wires, you unpin them from the smaller plug T26 and they replace into the bigger plug T40 Then you do away with the 2nd T26 plug all together. I explain it abit in the video and I’ll send you the pin swap that worked for me..
hiya I’m just wondering if you could help me with the main engine plug on the bkd which wired did you repin as I’ve done the glow plug and vac box but not the other thankyou !!
Fancy doing a engine swap on my sdi caddy
Hey bud I don’t have any spare time at the moment but appreciate the offer 👍
Hey mate hope your well need to pick your brains again this time about the a/c 😂
looking at doing the bkd swap regards to ac did you have to change much on the bls to bkd build to get the a/c plumbed up and working as my caddy bls is non a/c so looking at a donor touran for the everything thanks
Hi bud so my van already had ac so was just a case of fitting the touran stuff in the engine bay and it linked up with my caddy hoses.
@@YTDTETV hey thank you for the reply was it touran ac hoses on bls ac pump or did you manage to you the bls ac hoses thanks
@@jaspaldhillon11 BLS hoses where ever so slightly different improbably could have used them but I had a full bkd car so just used them.
Hu. Just a question. Is it possible to hook up a ALR PD150 with a dsg6?. I have a pd105 BLS with dsg.
hi mate ive recently done this swap but for some reason my van wont rev up properly it revs up slow and stops at 3k then i let the clutch out and it sneaks up to 3.5k it sounds like the wastegate is open if i unplug the black and red wired plug at the front the exhaust goes lound so im presuming the wastegate shuts?thats all i can tell you can you help plsssss🙏
real nice van dobo what a job still the man im out
Hey Darren thank you sir 👍👍 looking forward to finally using it.
Hi, just a question. Is it possible to hook up a pd150 with a dsg6.
Hi mate, quick question if you don’t mind. I’ve got a 1.9 BLS Caddy and I’m looking to put in the BMN engine from a Mk5 Golf GT TDI. The Mk5 GT TDI came with 2 engines as you probably know - the BKD (140bhp) and the BMN (170 bhp). Will it be a similar job do you reckon?
Cheers👍🏼
Hey bud so sorry for the delay, I know the engines and I believe it will be the same swap to the 170 👍
Hey bud, going to be converting my caddy soon, in two minds to use my pd150 arl from my golf or buy a touran and use the bkd. The van is Sdi so might be a lot more involved in the bkd conversion than the pd150. Did you manage to get a write up of parts needed etc?
Hi bud I was toying with the idea of ARL for mine to make it easier but apart from the wiring that took a couple of days the BKD was straight forward. I’ll sit down and do the wright up and add it to the video 👍👍
@@YTDTETV thanks bud 👌 top man!
I’m half way through this exact swap on my van, the three wires that you said went back into the van
Y/B fuel pump
Brown- earth
B/R don’t know
Did you cut the Y/B into the original van loom?
Did you work out what the B/R was?
Thanks.
Hey Patrick it’s the best thing I ever done to my caddy I much prefer the 2.0 BKD. The Y/B fuel pump wire I ended up just splicing it in so leave it connect in the fuse box and just splice the new loom one into it. I just earthed the brown wire on the earth but right next to the fuse box. I can’t remember what the B/r wire was for I’m sorry. There’s a group on Facebook called caddy engine swaps and in the info section there’s wiring diagrams for all engines so you’ll be able to work it out 👍 hope this helps.
I’ll have a look on there thanks, my T40 plug looks to be a bit different, terminal 6 is already used with a blue and yellow. Hopefully I’ll work it out. Thanks for the reply.
Same here, not sure if I'm supposed to replace the fusebox wires mentioned or just splice into them.
The van I'm doing had a cayc 1.6 engine,
the bkd maf sensor has four wires three go to the ECU plug but one goes to the original fuse box (12v feed afaik) (black/brown) there is also a red wire with a black tracer that runs from the glow relay up to the blue plug behind the bulkhead panel.
I'm watching this because I'm looking at swapping from bmm to bkd.would I be looking at the same issues with wiring from a bmm?
I'm not good with the electrical side!
Hey bud I’m pretty sure you’d still need to do some wiring as the bmm is an 8V I have heard people using the original loom as it still runs the BKD engine.
Hi, thanks for the quick reply. If people have used the same loom does that mean you'd just have to swap the ecu? That would be amazing but probably a bit obtimistic? .
Yes mate can u do me a engine swap on my 2007 caddy in no rush mate
Hey bud what engine is in your van now?
Hi mate, love all your videos they are awesome 👍🏻 just wondering if you could help me out please?
I have a 2010 caddy SDI BST engine code, I have just taken the BKD engine out of my MK5 golf and installed it in the caddy, my question is is the wiring you show going to be the same to change in mine?
Any help would be appreciated as I’m stuck on the wiring 😢
Keep up the awesome content 👍🏻 and thank you.
Hey bud so sorry for the delay, so I’ve been told the engine loom fits in the SDI bay easily someone even said their loom plugged straight in? How you getting on?
Getting there mate all other wiring done I’m just stuck on the earth wires from the glow plug module ( did you pin these into the 94 pin ecu plug? The three large earth wires and the red and green from the glow plug module I believe is the starter motor relay) any help would be greatly appreciated
@@speedfreakjay628 hey bud sorry for the delay are you still stuck?
Hi mate, had it running for a few seconds but had no fuel pump. Sorted out getting fuel pump working and now won’t start 🤦🏻♂️
I’m about to give up 🤷🏻♂️
@@speedfreakjay628 hey bud sorry for the delay how you getting on?
Bkd must be warm before u rev it up
Hey Dennis I do normally warm it up 👍
If you were using engine hoist can you remove full engine with gearbox or do u need to remove gearbox separately?
Hi Fraser, I don’t know if there’s enough room to pull it out the top complete, it might happen if you pull the front end off 👍
What did you do with the alternator bracket? As I’ve seen a lot about the powersteering pump ac pump and alternator don’t fit the Bkd
Hi bud my caddy had electric steering to start with so didn’t have to do that. I believe it’s easy to fit the electric steering rack.
Hi I'm currently doing cayc to bkd conversion on audi a3 what is there to look out for on the wiring side
Hi bud oh mate that will be the best thing you ever did getting rid of that 1.6, I’m a massive fan of the BKD. I havnt done it myself but I’m confident it will be very similar to my swap, it might even be easier regarding wiring but I’m not sure 👍 all the best.
I've just done a touran engine conversion having problems with the abs coding I've coded it for a touran and repinned the link wire but still says incorrect coding, code I have is 0017089, was it just straight forward for you?
Hi bud once I swapped the link wire mine didn’t need coding the abs light went straight out.
When you swapped the engine and clocks and ecu was there any coding for your keys?
Hi bud I fitted clocks, ecu and the small chip out of the touran key (fitted into caddy key) and it fired straight up no coding at all, I also fitted the cruise control stalks and that worked straight away to 👍
@@YTDTETV Oh that’s good thanks for that. Can’t wait get myself a touran now haha
Can i do this swap to a 2.0 sdi
Has anyone ever done a 130/150PD to DSG ??
Question sir, i have a BKD Engine in my A3, was this engine in the caddy what came before it?
Hey mark the caddy never had a BKD they either had a 1.9pd but it’s a very weak version called the BLS or they had a 2.0pd non turbo.
@@YTDTETV I did a bad job of asking. But you answered me right anyways, i ment are these PRE BKD or POST there PRE :)
Had several BKD Engined cars wont part with them now.
Need an engine 1.9tdi pd bjb. Heads gone. Can you help brother.. new member 😢
Hey Shane so I havnt any parts kicking about but I’ve bought a few heads from eBay over the years when I’ve got stuck. Hopefully you can find one mate 👍
Hi mate need ur brains pls have 2009 caddy bls want a bigger engine what can I fit on it mate many thanks in advance
Hi bud there’s a lot of options on what fit, on Facebook there’s a a page called CADDY ENGINE CONVERSIONS have a look on there 😎
How much would you charge to do something like this for me?
Hi bud so I don’t really have spare time to take extra work on at the moment, the videos take a lot of my time and I have a lot of projects to get through 😩
Is the golf for sale now?
Hi bud yes the golf is for sale now I’ll put a video up in a few days about it 👍👍
@@YTDTETV Where was you based? Would love to buy it. Loving the content too bud
@@samrouse352 I’m in deal in Kent, thank you mate 👍
Hi mate i dont sopose youd do a conversion same as this on my maxi life would you doner car all there just need someone to do the conversion
Hi Aaron, where abouts are you in the world?
@@YTDTETV hi mate I'm in Birmingham
Bkd engine is the best one for me they have a Garrett turbo some times you get a turbo, overboost problem but nothing a terra clean and Mityvac can’t sort out
Hey mark I absolutely love them I have 3 vehicles with them in and if I had more time I’d put one in every vehicle I own. They do sometimes throw up overboost. Thank you for the comment 👍
@@YTDTETV I no what you mean bud for me Volkswagens just keep driving, even if they have their problems I have not long, got rid of my seat altea XL which had the 2.0 tdi BKD engine 140 bhp with the Garrett turbo I can honestly say it never missed a beat I only ever had one problem a turbo overboost problem
but I took it for a terror, clean and Mityvac and it was perfect and to be honest that was in the very beginning of geting the car i’m a very strong believer in only using shell or bp fuel all the supermarket fuel is watered down with other chemicals. My mates dad told me years ago because he worked for a company that did it all. so I tend to find the cheaper fuels will block up the EGR valves, inlet manifold veins on the turbo. not long recently had a third child so had to get rid of the car. I’m now driving a Ford S max my god what complete piece of shit 🤣🍆💦 I sad to the mrs I can’t do this thus far is poo 💩 so I’m now on the look out for something with the BKD engine car or a van for myself to potter around in 👌👌👌
@@marktipton218 oh mate your so right about supermarket fuel 👍 my neighbour has an smax and it’s not to bad but it’s definitely not a VAG BKD. Hopefully you find something soon 👍
Volsvagen dassak avto😂😂
Terry Tibbs, talk to me.
Looking for someone to do my engine conversion if you’d be interested 🤔🙏🏼