Another great video! I love how you put in the product numbers!! It makes it easy to know the supplies needed for this project! Keep the videos coming! They are very inspirational and educational!
to bad the video was sped up can't really see what you are doing and the music would have been fine but sounded awful sped up and couldn't even try to concentrate on what you were doing. From what I could see of the end result was pretty but you couldn't really appreciate your work at that fast of speed.
+Linda Williams Turn the volume off .. These videos are meant for entertainment purposes only. Just watching me work having fun in my studio they are not tutorials. If want to LEARN some great stuff come take an online class.. lesliekailvillarreal.com. Thanks for watching!
+Gertrude Sever for a fe reasons.. Its easy to get the cab out in the future, and it helps to have a place for moisture to go that gets trapped you your setting over time
Thank you again for sharing - so much fun to watch! Love your work... btw - got my Tucker Tools shot plates today!!! all because of you! Take care, Paulette from Canada
Thanks for sharing your always incredible videos Leslie! Question- what did you use (on your flex shaft to clean up the ring shank solder bump where it attached to the backplate ? 😘
Another very entertaining as well as instructive video. Though it takes a lot of time and skill to learn and hone the techniques, you make it look so easy, and "do"able. Thanks for sharing. I like your workbench, modified from a laminate counter top. I need to get something with a "circle indentation" with a catch tray - I keep dropping the pieces I saw or cut and spend wayyyy too much time searching on the floor. I also watched all of the advertisement, assuming that you get $$ from the ads, albeit small (~_~). May your solder flow ever so smoothly. Thanks again, Shirley (ps. sorry for the confusion - when I signed off with that solder salutation a couple weeks ago, I didn't know my coworker Denise had logged onto youtube. That was me leaving the comments, not Denise.)
Leslie Villarreal Love the pink bench. I love to re-purpose. I don't have money to purchase brand-new top-of-the-line workbenches, tools, torches, etc. As long as we aren't in a huge hurry to get everything we want or need all at once, and have a wee bit of imagination, we can save a lot of money and have fun with the search and our own creativity and innovations. I needed a torch. I hesitated spending $400-$500+ on torch, tips, tanks, arrestors, hoses, & regulators. Lucky me - I found three Meco Midget torches (new-$145 each, a Smith Little Torch competitor) + five original Meco torch tips at a yard sale for $10. That was my find of the year! They also had 2 full propane tanks and a four foot tall oxygen tank. I took it all, and felt like I hit the jackpot. My workbench is a $5.00 dropleaf library table from a yard sale; soldering/enameling/pounding table is my old rolling butcher block from my kitchen. I made the rack that holds the rows of my enamel jars out of old chicken feeder tops turned sideways and screwed to pegboard. Thanks again for taking the time to do your instructive videos. Such a pleasure to watch - lifts my spirits!
Where do you get the rubber polishing tip? You used one in another video, but it was not on the list of items needed for the class. Have tried to find in the Rio catalog, but nothing called a tem-pro. Help please!
I also got my tucker tool shot plates sp1 and sp2. I am going to buy GBM, the graduated bead die set and the TB1-4 sets and the BC2 set as well. That's a total of about $660. Do I need all the TB-4 sets? Can I get just one? Also, how do I size the split shank ring? How do you measure where to cut?
Neat vid! What was the tip that you used on the ends of the shank where it meets the backplate after soldering? I've never seen one shaped like that before.
Seriously? She shows you a free video on how to make a ring and you whine about the music? Try being grateful and turn the volume down, there isn't any verbal instruction any way! Good Grief!
Video was great, but please, that music has to go.. Yes, I muted the sound.....Your work is so beautiful, it deserves to be viewed with elegant music.
+Gloria Borrero Gott play what i like!
Another great video! I love how you put in the product numbers!! It makes it easy to know the supplies needed for this project! Keep the videos coming! They are very inspirational and educational!
Danielle Blakely Thanks! And there is a link to buy the cabs too :) makes it easy .. free online class!
to bad the video was sped up can't really see what you are doing and the music would have been fine but sounded awful sped up and couldn't even try to concentrate on what you were doing. From what I could see of the end result was pretty but you couldn't really appreciate your work at that fast of speed.
+Linda Williams Turn the volume off .. These videos are meant for entertainment purposes only. Just watching me work having fun in my studio they are not tutorials. If want to LEARN some great stuff come take an online class.. lesliekailvillarreal.com. Thanks for watching!
love your work and video! I find it easier to solder the bezel down to the sheet before sawing it out. Just incase it moves around :)
here you go .. enjoy the 80's music and the video!
Leslie Kail Villarreal I enjoyed Depeche Mode and the rest as well as the content of the video! 😂
can't believe this was almost a year ago!!!! learned so much since that time!
+janie mills stay tuned in!!!
Now, if I could only figure out a pattern for a similar saddle ring like yours. I love the shape!
+janie mills you did! you took my classes mama got both templates!
Hi Leslie, I have two question. Why did you drill holes in the cab base? Is the ring shank off set?
+Gertrude Sever for a fe reasons.. Its easy to get the cab out in the future, and it helps to have a place for moisture to go that gets trapped you your setting over time
Haha! BEST soundtrack and awesome video!
Thank you again for sharing - so much fun to watch! Love your work...
btw - got my Tucker Tools shot plates today!!! all because of you!
Take care, Paulette from Canada
Polly Dolly Aww that's great! Thank you!
Thanks for sharing your always incredible videos Leslie!
Question- what did you use (on your flex shaft to clean up the ring shank solder bump where it attached to the backplate ? 😘
Love it! Girls just wanna have fun!
Love those cabochons. Great video. Can't wait to make one of these rings.
Another very entertaining as well as instructive video. Though it takes a lot of time and skill to learn and hone the techniques, you make it look so easy, and "do"able. Thanks for sharing. I like your workbench, modified from a laminate counter top. I need to get something with a "circle indentation" with a catch tray - I keep dropping the pieces I saw or cut and spend wayyyy too much time searching on the floor. I also watched all of the advertisement, assuming that you get $$ from the ads, albeit small (~_~). May your solder flow ever so smoothly. Thanks again, Shirley
(ps. sorry for the confusion - when I signed off with that solder salutation a couple weeks ago, I didn't know my coworker Denise had logged onto youtube. That was me leaving the comments, not Denise.)
Shirley Walle Thank you Shirley!!!!
Leslie Villarreal Ps... my pink bench is an old door stained pink :) not a counter top !
Leslie Villarreal Love the pink bench. I love to re-purpose. I don't have money to purchase brand-new top-of-the-line workbenches, tools, torches, etc. As long as we aren't in a huge hurry to get everything we want or need all at once, and have a wee bit of imagination, we can save a lot of money and have fun with the search and our own creativity and innovations. I needed a torch. I hesitated spending $400-$500+ on torch, tips, tanks, arrestors, hoses, & regulators. Lucky me - I found three Meco Midget torches (new-$145 each, a Smith Little Torch competitor) + five original Meco torch tips at a yard sale for $10. That was my find of the year! They also had 2 full propane tanks and a four foot tall oxygen tank. I took it all, and felt like I hit the jackpot. My workbench is a $5.00 dropleaf library table from a yard sale; soldering/enameling/pounding table is my old rolling butcher block from my kitchen. I made the rack that holds the rows of my enamel jars out of old chicken feeder tops turned sideways and screwed to pegboard. Thanks again for taking the time to do your instructive videos. Such a pleasure to watch - lifts my spirits!
Leslie what brand of spray flux do you use?
Prip's flux:)
Thank you Leslie I love you video's on youtube!
Why does the music sound like chip monks?
+Liz Aker because the video is playing 3x (sped up)
How do you size a split ring shank compared to a full shank...? Tia
+Metalmamas13 make a full size ring that fits then cut out the part that attaches to the ring
Where do you get the rubber polishing tip? You used one in another video, but it was not on the list of items needed for the class. Have tried to find in the Rio catalog, but nothing called a tem-pro. Help please!
OTTO FREI
Please what is that wire called that you wrap around?
gallery wire
I also got my tucker tool shot plates sp1 and sp2. I am going to buy GBM, the graduated bead die set and the TB1-4 sets and the BC2 set as well. That's a total of about $660. Do I need all the TB-4 sets? Can I get just one? Also, how do I size the split shank ring? How do you measure where to cut?
+Christina Lagerson wow thats a lot of dies! no you don't ned them all
Neat vid! What was the tip that you used on the ends of the shank where it meets the backplate after soldering? I've never seen one shaped like that before.
+Alyssa Kay a rubber polishing tip
They get like that when you start using them. They don't start out shaped like that.
un millón de gracias ,, me has ayudado un mundo !!! Dios te bendiga
Great Video. enjoyed it. Very nice work.
Aquí no se consigue ese adorno en Bogotá
Fun..Happy..Awesome Video
Slow down on those energy drinks girl ! Fabulous as always.
thank you for making this video!
Why the holes in the plate?
That question was already asked see the thread below :) thanks
hi thanks for sharing are you sale the cabuchon?
Beautiful. No music please, or maybe softer music 🥰🥰
Noted!
beautiful lesson....thank you....:):)
+Kremena Venkova THANKS!
I hear Erasure!
"a little respect!" 4 sure
😍😍😍
Thanks for sharing!
+Julie Bunch Thanks for watching hope to see you all in my BOHO RINGS class thats on RIGHT NOW!
Wuuuuuaaaauuuuu donde estabas que no te había encontrado fan número uno
Beautiful ring but that music is awful!
👌👌👌😘😘😘🌹🌹🌹🌹🌹🌹🌹
😉😘👆👆👆👆👆✌️
روعه
Can we NOT have the crappy chipmunk singing in the background? Big turnoff!
Seriously? She shows you a free video on how to make a ring and you whine about the music? Try being grateful and turn the volume down, there isn't any verbal instruction any way! Good Grief!