HPS HEATER HOSE INSTALL BMW E46
Вставка
- Опубліковано 15 чер 2024
- In this video, we'll guide you through the installation of the HPS Performance Silicone Heater Hose Kit for the E46 BMW 3 Series.
The vehicle we are installing the items on is a 2002 BMW 325i. Some items may appear different on 328 and 330 models.
Tools required:
-Small flat head screwdriver
-Large flat head screwdriver
-T30 torx bit
-10mm socket
-6mm socket
-ratchet
-dremel with cut off wheel attachment
-marker or paint pen
-funnel
-coolant receptacle
-jack + jack stands OR drive up ramps OR lift
Installation difficulty: 4/5
This video is for entertainment purposes and does not cover the full extent of the installation. This installation requires mechanical skill and common sense. We assume no liability for damage or injury.
hpsperformanceproducts.com/pr...
Part #57-1937 - Авто та транспорт
Even though I removed the intake manifold this video was super helpful. Thank you so much for making it!!!!
Thanks for watching!
Please excuse my French.. but this is one the best fucking videos I've seen in a long time. Good job! 👍🏻
thank you!
Great video! Really appreciate the diagram
super helpful, thank you
It's our pleasure!
Hanks for not showing the most important hose to be put back on
Nice video!
But, I suggest to change the o-rings inside the fittings beacuse the o-rings are the actual weak sport and get flat over the time. When you do install them again, the chances are high to get a leak because of the flat o-ring.
Yeah I'm looking at removing the manifold as well as can't budge the 2 bulkhead tubes. Got a blockage somewhere
I’m currently doing these hoses and the hard ones under the intake as well on my 330ci
They sure do make it difficult to access some of these hoses
You have to pull off the intake manifold. Its doable but not the easiest thing in the world.
Thanks alot
No problem!
I ordered the hose kit but it keeps saying it’s an m3 kit. I’m not sure what to do with the two small hoses. I believe that the long hoses will fit perfectly but where the hell do the small ones go to?
Can you show me where to purchase the long straight hose that goes from the expansion tank to the firewall.please I can't find it anywhere
The straight hose is included in the kit, it is not sold separately.
Would this fit on a 2001 bmw 330i M54?
Great video, really helpful. (would be even better without the annoying music!)
Can you guys please make one with for the hard hoses that are under the intake manifold ?
That would require removing the intake manifold assembly. Not an easy task regarding time. I suggest you look at a video regarding CCV Replacement or Starter Removal and installation. That should show how the heater tube is attached to the block.
@peterlewis2881 no I mean make a silicone hose set! Haha sorry but those fail in these cars you guys would be the first
Can I get the link for this exact kit
Will these work on e39 lower m54?
why doesn't the kit come with the end adapter that connects to the 'T' connector that connects to engine bay and radiatior? where can i find that end adapter alone?
Could you send us a picture of it to tech@hiprospeed.com
I can’t get the fitting off that’s connect at the bottom of the coolant reservoir :/ I released the fitting clip and still can’t pop it off. HELP
Hi, As you can expect, the seal hasn't moved in 20 years so it just needs some persuasion. Use a flat head screwdriver or pry bar to pry between the fitting and the expansion tank outlet neck. Very carefully and slow apply pressure on the top and the bottom using this method. Apply light pressure a little at a time. Don't try to get it off in one shot... it's not gonna happen and you're gonna break something if you do.
Would this kit fit on a 2000 323i BMW E46? Everything looks the same as my car, just curious before I purchase !
Hi, Yes this kit will fit your car 👍
@@HPSPerformance Thank you for your response! Sorry for all the questions, but what type of radiator funnel kit did y'all use for this BMW?
@@robbya6113 It is a universal kit found on amazon
www.amazon.com/OEMTOOLS-87009-No-Spill-Coolant-Filling/dp/B01A2CQSU6/ref=sr_1_1_sspa?keywords=radiator+funnel+kit&qid=1646064517&s=automotive&sr=1-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyNkFHM09RTDkwTDhEJmVuY3J5cHRlZElkPUEwNDE0MTc4MkFQQlhKTUlNSk1USyZlbmNyeXB0ZWRBZElkPUEwMDc4NDk2NDdMMTBaU0tJVVNHJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
we’re can buy these kit
hpsperformanceproducts.com/products/hps-silicone-heater-coolant-hose-kit-2001-2006-bmw-e46-m3-57-1487
How do to undo the “hard” one!!!!!
which step are you referring to?
That is the one located under the manifold, there are other videos showing how to remove the manifold.@@HPSPerformance
Good video but u gotta use blue coolant 🫡