Traxxas T-Maxx 3.3 Tuning and Ripping
Вставка
- Опубліковано 21 лют 2024
- This is how I tune my nitro engines. It is always best to start with factory carburetor settings. The T-Maxx 3.3 is running on 20% Nitro with OS 11k Carburetor. Hope it helps all who's interested. Stay tuned for more!
- Ігри
Thanks for the vid im just coming home been thinking about my tmaxx the whole time in there . Love to see tmaxx owners take care of their trucks and post vids . Appreciate it
And thank you for your comment and view!
Still have my 1st generation Tmaxx 2.5 & 3.3.
It seems like yesterday when I bought them brand new way back when.
Great job!
I'm fairly new to the T-Maxx line and loving every minute of them! Thanks!
Just got me a t-max classic 1.5pro i no the 2.5 & 3.3 are Superior motor compared , but it fired right up for the first time for some time , your videos help me so much with your tuning tips & idle adjustments help me out big time 🤙keep it up
You're welcome! That's why I do it!
Hey man that truck runs real well. Nice looking rig. God Bless my friend and have a good one.
@@FeArhsma21 thanks! I appreciate it!
The hobby MUST STEP UP now with new micro gasoline/nitro engines, like multi-cylinders, turbochargers…
I’m waiting this since I’m a kid and I’m 44 now, come on we now have the technology for !!
I need to see this before I die
Imagine drift cars with rotaries………..
Or Monsters with V8 !!!!!
By the way these T-Maxx look DOPE
There are superchargers for nitro engines on the market. There's even some rc engines with NOS! You can find them here on UA-cam. Thanks for watching!
@@Dre357 yes I know them of course 👍 but I meant RTR stock, by our usual brands !! Reliable, perfectly tuned etc.
Exactly like Traxxas does with this T-Maxx for example… Something dead constant, never failing, easy to operate Yeezy to look
(Not sure my English is very good sorry for that)
@1980VINZ Gotcha. That would be great if companies like HPI and Traxxas would enhance their Nitro vehicles. Here's to being hopeful! 👍🏿
@@Dre357 🤞🤞
Very Helpful i have a T- MAXX im rebuilding now so this video will come in handy.... thank you!!! 👍👍
Glad it helped! Thanks!
So Chewbacca sound is Good ❓❓
Nice T-MAXX 👍
I started using the fuel line pinch test to setup the low speed like Traxxas describes in the owners manual iv gotten where i can get them to idle really nice.
I use that method as well. The manual really helps when you're learning the basics of nitro engines.
Bro, the sound, smell and two speed sound soo dope! But the electric on a mild setting will eat that for break,lunch and dinner. I stayed nitro for the last 20 years, was introduced to electric around Christmas. Traded the nitro, bought 2 electric both castled out. One 71mph, the other 67mph. So ez, plug and play. God bless bro, appreciate your post
I own and enjoy my share of electrics as well. I even own an Arrma Infraction 6s. But ease of use and speed is not what I'm on right now. I enjoy the sound, the smell, 2 speed and 3 speed you mentioned. I also enjoy the tuning, not having to wait for a balance charge and storage charge and simply pouring in some fuel and burning some nitro. The great thing about this hobby is it appeals to so many people for so many reasons. Thanks so much for the comment and I hope you enjoyed the video!
Respect, luv the energy. God bless
@@marcodasilva5087 you as well.
TMaxx power!🔥
Really good vid man im subscribed
Thanks and welcome to the channel!
I have the OS carb on my Jato. 3.3 runs like top beautifully, no more second stage idle. There is much more low-end punch also! Let's not forget the O.S. LC3 plug with VP 9% oil 20% nitro fuel ⛽️ long live nitro!
Rocking that carb on my Jato as well! Nitro Gang! 💥 💨
I just pulled my 3.3 off the shelf through some fast eddy crank bearings, gave the case a good clean and man ran great today. I’d like to get a os carb seems like the way to go. I’m also on my 2nd set of crank bearings idk I can be lean on the top and rich on the bottom I think the lsn screw on the stock carb is just really loose it doesn’t hold the tune well. But today it did good. Quit while I was ahead lmao
@@ChrisBrown-gx7bf awesome! Keep burning that nitro!
Thank you
You're welcome!
Nice rip ..
Thanks
I live in the same area as you I gotta link with you sometime get this tuning down
Sound's grate
Thanks
That really help me out thanks. Now what about the big mixture needle screw on the side of the carburetor do i adjust it as well?
The OS carb is probably the best upgrade you can do on this truck or any traxxas nitro. I wish traxxas would put a little more quality into there carbs so new people to the hobby wouldn't get so frustrated and give up. The 3.3 is actually a decent engine its just that garbage carburetor
I agree. The OS carburetor is much better in every aspect. It would definitely make tuning easier for newcomers. In the video, I was attempting to show how simple it was for me.
I think the biggest problems is the idle screw they should call it the air screw instead because it won't adjust correctly until the LS needle is set correctly.
And most beginners will back it way out thinking it's going to lower the idle but all it's doing is leaning ot the low speed.
@@michaelgraham2943i know right and thats exactly what i did when i started out with nitro until i learned to set the idle gap then leave it alone and adjust the idle with the low speed needle. With that said some work halfway decent but most are still inconsistent garbage and even with that knowledge still wouldn't work right half the time. Have a nice day bud
So far the only problem I have had with a carburetor is I got a bad HS needle on my rustler right out of the box.
What I found that works for me is I set the LS needle with the fuel line pinch test so it turns off in 3 seconds
then as I slowly lower the idle I richen the LS at the same time and same amount of turns until I find the idle I like
I usually start with a 0.06mm air gap and after it's finally adjusted I end up with something like a 0.02mm air gap.
The trick is keep the low speed set so it turns off in 3 seconds as you adjust the idle screw.
@@michaelgraham2943 Well you kind of made my point and i can tune a 3.3 carb. What you explained is a lot for most people. The os carb is just more forgiving and consistent on the settings. What i was saying is it would make it easier for newcomers because lets face it most people are not mechanically savy and dont want to spend that much time to figure it out and just plain give up before giving it a chance. Not saying it needs to be os quality but they could have done better. I'm glad you had good luck with yours but thats not everyone's story.
Hey man great video, I have a nitro slash with the TRX 3.3 for over 10 years now, I’ve just started running it again after being shelved for a few years. It can get up to high speed without issue but it’s acceleration from a standstill is pretty slow, unlike yours which can pop wheelies easily. I’m not an expert with tuning but from what I understand that might have to do with the low speed needle. Do you have any suggestions with that? My other theory is that it might just be the throttle servo starting to give out which is over a decade old at this point but I’m pretty sure it just has to do with tuning.
Yes. It was has a lot to do with the low speed needle. It may need to be richen a little bit. Try that out.
Great running truck, I have a new carb on a2.5 motor can I put it on my new 3.3 and just richen it a bit??I still gotta break it in
Yes. Both engines are compatible with that carburetor. Good luck!
hay brou, im just getting into to nitro. i acquired a T-Maxx 3.3 in a trade. (Free) i know not much about nitro... I listen to you run. did you add a second gear? or is that stock? does mine have that? I find i have several upgrades on it. but i need to start with buying a starter kit. is there a specific kit i should buy for this T-Maxx?
Alright. I'm gonna answer your questions to the best of my knowledge. No I didn't add a 2nd gear and yes it is stock other than the shocks and carburetor.
Now, as far as a starter kit, it depends on a bit of things like how the engine is started and how the glow plug is ignited. Some things that are usually a must is of course fuel, fuel bottle, glow plug igniter and extra glow plugs, a tool to remove/replace a glow plug and small flat head screwdriver. Here's a suggestion: Redcat Racing 80142A Nitro R/C Starter Kit a.co/d/4FitBcf
You may also need one of these as well to start your engine: Traxxas 5280 Complete 2.5 Control Box a.co/d/e0OSOiy
If you need the control box, you'll need a 7.2 volt NiMH battery pack with a tamiya connector and charger to power it:
Melasta 7.2V 9.6V 8.4V RC Car Battery Charger Compatible with Redcat Racing Hexfly NiMH Battery and Standard Tamiya Battery, 2.4V-12V NiMH/NiCD Universal RC Charger a.co/d/gXWA0bi
Zeee 7.2V NiMH Battery 3600mAh RC Battery High Power with Tamiya Connector for RC Car RC Truck Associated HPI Losi Kyosho Racing Hobby a.co/d/bJpQF8b
Hope this helps, good luck and be patient! 👍🏿
What is the best place to get the OS Carb. I have an older 3.3 and sometimes have problems tuning.
www.ebay.com/itm/392487449205?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=fNXvRiTaRNC&sssrc=4429486&ssuid=DO9-34WpSP6&var=&widget_ver=artemis&media=COPY
This carburetor really opens up the 3.3. Especially on the low end.
Hey brother what you think about the hpi 5.9 savage nitro you think is good for as durability.
I tend to agree. I have the savage x 4.6 and it's as durable as I need it to be. I've actually considered getting one myself. They're both have a bashable chassis IMO
Hello. Can you tell me, did you change the one-way bearing? Did he slip or not? Or did you serve him? How many gallons of fuel have you burned so far?
I've ran around a gallon through it. I haven't changed the one way bearing and it hasn't slipped, yet. If yours is slipping then it maybe packed with oil and sludge. May just need a good cleaning. Hope this helps!
@@Dre357
I've used half a liter so far and nothing has happened, I was just worried about it. Thank you!
@reaklyf3451 Great! Glad to hear that. A few more tanks and it's really gonna come alive!
Okay thanks that really help me out. I got 1 more question, how about the big needle screw on the right side of the carburetor how many turns that one needs as well my brother.
That's the idle set screw. It should be set around .50mm.
Start there and adjust as needed.
@@Dre357 is it called the mixture needle screw?
@@joserobinson8419 no. It's called the idle set screw.
@Dre357 so you have 2 different needle screws.The idle screw, and the idle set screw is that correct?
Hey dre if its ok with you can i send you a picture of it do you have a messenger app if so i can send it to you brother or email address
When my tmaxx is at idle it jerks. What causes that ?
@@DirtbikeDad is it a tmaxx classic?
@@Dre357 ??? It has a 3.3 and and black transmission and radio covers
@DirtbikeDad well, my Tmaxx classic has a black colored transmission and it jerks at high idle. It is weird but is normal for certain Tmaxx models. It's the way the transmission engages. My newer model Tmaxx 3.3 with a gray transmission does not engage in that way.
Hope this helps!
❤😂🎉😢😮😅😊. ไฟไฟไฟไฟไฟแอดพ์.
I thought u shouldn't tune an engine cold
My engines have been running consistently around 200 this time of the year and have been performing to the way I like. The temperature usually rises as start running harder and the fuel tank gets at below half, the temperature rises to around 240. That's still in the safe zone for me.