Intergas top up with water and testing mode

Поділитися
Вставка
  • Опубліковано 14 січ 2025

КОМЕНТАРІ • 36

  • @dazzler_falak
    @dazzler_falak 18 днів тому +1

    Your video is a saviour 😊😊

  • @martinkandrac7679
    @martinkandrac7679 3 місяці тому +1

    Thanks for the video. It helped me a lot. Thank you

  • @ip2489
    @ip2489 3 роки тому +1

    The bathroom radiator of this council flat is leaking. What can I safely do to stop it now?

  • @magdalenasciezka1954
    @magdalenasciezka1954 2 роки тому +1

    I have recently moved into rental property that has combi compact eco rf 24 installed and I have no idea how to turn the heating on, the manual is not explaining it very well. The boiler looks so simple yet so difficult to operate. Can someone kindly assist?

    • @greenleafheating75
      @greenleafheating75  2 роки тому +1

      Hello
      You need to find the termostat First
      Thank you

    • @magdalenasciezka1954
      @magdalenasciezka1954 2 роки тому +1

      @@greenleafheating75 thank you, I found Center thermostat in the house.

  • @lizpentaghast3482
    @lizpentaghast3482 2 роки тому +1

    Is this how to increase the pressure? The display is showing a flashing 0.0

    • @greenleafheating75
      @greenleafheating75  2 роки тому

      Hello
      Yes
      Press off the boiler
      The pressure will appear
      Open the filling loop
      Pressure 1.5 bars
      Close the filling loop
      And press power on the boiler
      👍

    • @SpaghettiTraveller
      @SpaghettiTraveller Рік тому

      I've got the same, but turning the things at the bottom isn't doing anything. Constant flashing 0.0 and the weather is starting to get colder. Did you manage to fix it or did you call out a plumber?

    • @lizpentaghast3482
      @lizpentaghast3482 Рік тому

      @@SpaghettiTraveller I did manage eventually. Took ages but I got there

    • @Yeti-db8qd
      @Yeti-db8qd Рік тому

      ​@@lizpentaghast3482but how I turn valves but nothin happening it's all silent

    • @lizpentaghast3482
      @lizpentaghast3482 Рік тому

      @@Yeti-db8qd have you checked your water supply?

  • @ip2489
    @ip2489 3 роки тому +1

    At the beginning of this year, I never envisioned taking a laptop into the boiler room and trying to fiddle with it with a youtube video. Why is this happening to me? How many times must I keep fixing things that should just work? I'm about to try this. If it doesn't work I give up!

  • @AARON-15-k1y
    @AARON-15-k1y Рік тому

    Can you use just your radiators always on and not turn the hot water on? Will it mess the boiler up?

    • @greenleafheating75
      @greenleafheating75  Рік тому

      Hello
      Yes , you need to stop cold water going in the boiler and drain
      👍

  • @ledoledo515
    @ledoledo515 Рік тому

    Hi
    I have a rapid 25 gas boiler. Before to go away for 1 week I just turned the gas boiler just pulling out the insulation fuse that is beside the gas boiler. Now that I put the fuse again give power there is no power, just seen for half second the lights On and Off and no power anymore.
    Do you think the logic card inside is burned or could is any inside fuse gone? Tested the power fuse beside the gas boiler still good.
    Any help please 🙏
    Thank you

  • @binneydon4531
    @binneydon4531 Рік тому

    I have similar boiler which keeps loosing pressure but absolutely no leak found.

    • @greenleafheating75
      @greenleafheating75  Рік тому

      Hello
      On intergas you need to check the expansion vessel
      Is one of the common problem
      👍

  • @lividkiwi_
    @lividkiwi_ 3 роки тому

    I have the same boiler, different set up. Had it for 3 years. Our radiators won’t bleed and we have had several engerniers come out and look at it. It makes really bad banging sounds. Is it trapped air?

    • @greenleafheating75
      @greenleafheating75  3 роки тому

      please check my video with easy bleed radiator and maybe it will be of any help

  • @ledoledo515
    @ledoledo515 Рік тому

    Hi
    I have a rapid 25 but the pressure is 0.
    I don't know how to increase the pressure because I don't see any loop under my boiler. Any tip please, we don't have heating and hot water at home
    Thank you

    • @greenleafheating75
      @greenleafheating75  Рік тому +1

      Hello
      Call the installer
      It should be an filling loop between right 22mm pipe and cold in pipe 15mm
      Some valves
      On the old boiler where it was the filling loop
      On intergas it is a lot off problems with the expansion vessel
      It will be better to check that

    • @ledoledo515
      @ledoledo515 Рік тому +1

      @@greenleafheating75 I have 2 expansion vessels, 1 is blu and another one is red (bigger). Is 2 days that I'm calling a lot of them.but they're always busy

    • @greenleafheating75
      @greenleafheating75  Рік тому

      @@ledoledo515
      It just need to tell you where it was install the filling loop
      Is no need to come to your house

    • @ledoledo515
      @ledoledo515 Рік тому

      @@greenleafheating75 don't understand but the pressure increased at 1.3 bar..but when I try to turn on heating or hot water is not working and after few seconds is flashing number 4 in the screen that seems a gas missing ignition but gas is open,still not heating and hot water

    • @greenleafheating75
      @greenleafheating75  Рік тому +1

      @@ledoledo515
      Hello
      Call the warranty
      Thank you

  • @stavrospappas3506
    @stavrospappas3506 Рік тому

    Hallo I don't understand good English. Wat is this settings? Low. Midium. High. ... before down radiator is not so warm. And when i put it in high,now is hot.thx u

  • @JohnSmith-ho8up
    @JohnSmith-ho8up 3 роки тому +1

    Use CT1 Miracle seal with this. Best boilers u can get.