How To Fix Nissan Quest LCD Display Problem - Replace Ribbon Cable
Вставка
- Опубліковано 27 сер 2024
- Replacement LCD:
US: amzn.to/2kIa7IW
CDN: amzn.to/328jWVJ
Ribbon Cable Only:
US: amzn.to/327JCCe
CDN: amzn.to/2NIN81Z
Weller WLC100 40-Watt Soldering Station
US: amzn.to/2T1eDUg
CDN: amzn.to/2O4Cm6m
Resin Core Solder: 1.0mm, 100g 60/40
US: amzn.to/2DdmbxL
CDN: amzn.to/2LvEqT4
Precision Screwdriver Set
US: amzn.to/300fEn5
CDN: amzn.to/301gYWv
Flush Diagonal Micro Wire Cutter
US: amzn.to/2mtDG7k
CDN: amzn.to/2oJHmCG
16 Gauge 100 feet copper wire; Red/Black 2 Conductor
US: amzn.to/2Laq6zt
CDN: amzn.to/2lsKth5
Car Panel Removal Tool Kit 18pcs
US: amzn.to/3jGH34l
CDN: amzn.to/3ArxlcK
Angled Push Pin Pliers
US: amzn.to/3yE8LVG
CDN: amzn.to/3fUhCeB
Professional Wire Stripper
US: amzn.to/2REssbn
CDN: amzn.to/2lRA1jr
Klein Tools Single Pull Wire Stripper
US: amzn.to/2Rw63ga
CDN: amzn.to/2nBl7OI
=========
This video will show you how to fix the LCD display problem in Nissan Quest due to bad ribbon cable.
=======
Shop Dial2Fast Store For List Of Tools & Parts
US: www.amazon.com...
CDN: www.amazon.ca/...
=======
Support Dial2Fast on Paypal
www.paypal.me/...
Support Dial2Fast on Patreon
www.ptreon.com...
Dial2Fast website
www.dial2fast.com
Like us on Facebook
/ dial2fastofficial
Shop Amazon
US: amzn.to/2LqTtuk
CDN: amzn.to/2L5QASt
Join Amazon Prime
US: amzn.to/31i05mP
CDN: amzn.to/3kG0D0R
Try Amazon Prime 30-Day Free Trial:
US: amzn.to/2S3GjHI
CDN: amzn.to/3kG0D0R
========
As an Amazon Associate, I earn commissions from qualifying purchases with the links provided here.
I ordered the display for $18 from eBay. Finished the work in less than 30 mins. Great video!
Excellent, followed video and replaced ribbon w/ lcd screen for $20. Called and dealer quoted $875 over phone. Thanks a million :)
Thanks! The instructions were great and detailed. Just a tip for anyone who needs to replace the LCD display unit. I found one on Amazon with the ribbon and it sells for under $30.00 It was shipped to me in three days.
100% Awesome video! I watched this on a Tuesday, had a ribbon and solder iron kit ordered that same day from Amazon ($18), and now at the end of Thursday I have a working screen! Thanks for the accurate and very helpful step-by-step :) I'm going to search through the rest of your videos for anything else I need now.
Thanks for this video. I ordered a replacement screen with attached ribbon cable for $36 from Amazon. The new screen is much brighter and you're video let me do the whole job in under 45 minutes!
I had this same problem on my 06 Quest.
I went the route of purchasing a new lcd screen with ribbon cable attached.
The toughest part for me was prying up the plastic shroud.
Once I got that off everything else was cake.
Thanks man!
The Nissan dealer told me that to fix this issue they need to replace the whole dashboard, obviously that will cost me a lot of money, thanks to your video I was able to fix it by myself, thank you very much
Great vid with detailed instructions! You saved my great neighbor several dollars! I just finished the repair for him with no problems! Thanks a million!
I just finish installing my new LCD screen, I bought mine at Ebay for 22 dollars and this video really help. The only thing I had issues was putting back the speedometer gauges, it took me 2 times to get speed back to zero.Thank you
Very good to hear. Thanks for sharing!
this worked 100% for me. I can honestly say I was scared to do the work on this but I am glad that I did. saved me over $400
your video is the best I've found yet. your detail and explanations are very well done. i would be interested in watching more of your videos on other ways to keep the quest in good working condition.
+Yonna Bradley Thank you and subscribe to my channel. I have quite a few videos on maintaining the Quest.
Thanks your video did me well i did it ...i only spend $ 28.86 it took me like an hour and half to do the work...thank you again im so happy ...
Definitely wanted to thank you for such a detailed and informative video. Everything went well...well...after a 2nd attempt...
So the LCD basically reverted to its original form of unreadable information after my initial installation. I opened things back up and really heated the strip and pressed much more firmly than the first time. I held the iron on for roughly a minute and also moved from left to right until I felt comfortable to put things back together and things are working perfectly. Thanks again for taking the time to detail this!
Excellent, always good to hear feedback from people such as yourself!!
Thanks so much. My lcd has been broken for 7 years and I ignored it because I thought it would be an expensive fix. This was $15 and 30 minutes.
Very helpful!! Finished in around 30 min... Had to fish for a screw. Thank you very much for the detailed instructions!!!
Perfect instructions!!! Followed it step by step and our 2005 Quest has a clear working LCD, now we know how many miles and how much fuel we have. You're great, keep up the great work and once again many thanks!
Thanks for sharing your experience!
Just subscribed to your channel. As the owner of a 2004 Quest and as a broadcast radio professional, I appreciate your videos because they are to the point and don't skip steps. VERY mobile-friendly! Keep up the great work and don't be surprised if I post a question or two.
Thanks for your comment!
You're welcome! Wish I had seen your lower control arm video a few months ago before the local garage changed me $1,000. Didn't know it was that easy. QUESTION: I might have to change out the ac compressor. Doesn't look to bad, but don't see any videos from anyone showing how to do it. Do you have any experience with that?
I have not replaced the compressor, but I have a video on replacing the drive belt which wraps around the compressor. You will also need a mechanic to help evacuate the refill the R134. Those refill bottles you get from auto shops aren't very precise. Here is the belt video: ua-cam.com/video/ld-PK319w9c/v-deo.html
Thanks for the thorough explanation. I just saved a lot of money by doing it myself. I bought the LCD with the cable already on Ebay for only $21 bucks. Keep it up!
Perfect, it was a bit scary pulling the needles off the gauge and I had to gently pry with a screwdriver but they did come off and everything went great. Thanks a million!
Wow--great job--I wouldn't even come close to tackling something like that😟 Want to try a 2014 Nissan Murano--mine isnt working and the local garage doesnt seem to want to tackle it. Again great job!
Just replaced mine (at 136k miles) thank you for the A+ video!
Great video. I just bought a 2004 quest a couple of days ago with the exact issue. You have saved me a few bucks before I even started. Thanks
Good luck with your repair.
Awesome !!!! $18 bucks. Two day Amazon shipping. Taking my time following your tutorial. Priceless !!!!
Works like a champ. The only negative for me was that I bought the Quest being told the mileage was 51,000 and come to find out it is actually 185,275. Ouch!!!!!!!!!!!!! None the less, the car is in great shape. Thanks for sharing your experience.
Sorry to hear about the mileage issue, but glad you got it fixed. Thanks for the feeback!
Dang i have a 2005 with the same issue and i watched his video and gonna try to fix mine myself . He does a very fine job with his detailed work .
Just want to say Thanks A Lot for the step by step, my car was without a display and Thanks to you it works great. I bought one on eBay for 26 dollars and it works fine thanks again😀
Thanks for your comment!
Thank you for the detailed video. Brothers helping brothers keep a happy wife and a happy life. Your the man!
You are very welcome!
thanks for this great video, u saved me $300+. i fix mine myself with this video. i actually tried to send the whole cluster to someone who said after receiving it that's unrepairable, i told him to mail it back, so i fixed it myself for $20.
I really like the thoroughness of your video...much more than most, not only Nissan Quest info...many others included...Mucho Mahalo...from the Big Island of Hawaii...
Really appreciate your comment. Thank you!
Our 05 quest we had, had the white display, ours started to fail at around 165,000 miles and we had some other issues with the van at the time, mainly the timing chain but this was helpful in me understanding what goes on to repair this. Thanks!
Hi,
I did this job back in the fall, and would say, that IF you don't have the special soldering tools, then just buy the LCD with the cable already installed. THEN.. (see video at 11:31, and instead of bending the cable..(tends to pull pins away from PC board,,, Cut an 1/8" groove in the plastic directly across from the ribbon (dremel Tool), and bring the cable streight out from the PC board. The ribbon cable will then curve up to the LCD screen when you go to install it. Dont no why Nissan couldn't have forseen this problem!!! You don;t have to be a socket Rhientist !!!
I'm glad you and I, have the same vehicle. Thanks for the information, on fixing the Quest. save me a lot of time and money.
Thank you so much for this. I bought my quest used and was told by the dealer "This is a huge electrical issue"
Which I knew was a lie but still. Happy to have it fixed and within my meagre budget!
I followed this video and everything turned out great. I installed a new part instead of only the ribbon.
Excellent, very good to hear!
did it friday. worked exactly like you showed. thanks a lot man!
Excellent!! Thanks for sharing.
I have a problem it not work but the fun running all time and brings heart inside
Thank you for the video. Very helpful. I was able to get it done in less than 20 min. I ordered the LCD display with the ribbon from eBay for $20.
Omg thank you so much for this. I tried this last year it worked for two months, not bad for a fist try I guess.
Awesome!! I was afraid to try it but your video gave me the boost I needed and it worked great. Saves a bunch of money!!
+Nicholas Brown very good to hear. Thanks for sharing!
Hey man, thank you so much, I need to fix this to pass inspection and the mechanic. Was charging 250, heh got it done for 50 bucks with this vid. Thank you so much.
Very good to hear. Thanks for your comment!
Thanks great video! I found one on Ebay for less than $20 including shipping with the ribbon already attached! Success on the first try.
Thank you so much this is a very very very useful video watching this saved me alot of money
100 percent work well ,Just got my order and install by myself .. All work well
My 2004 cluster goes on and off and flash on and off all inside lights are not working at all do you think the cluster is the problem or what do you think?
Thank you for taking time and expertise with detail instructions
You are very welcome!
Thanks for the video. To be honest the best tutorial that I have ever seen.. I did it step by step with a successful work. Thanks again!!
Very Goog explanation.
Saved me $250.
Cheers
Thanks, just did the entire LCD instead of soldering. I didn't want to deal with the soldering because of the hurry. Great video tho
Great video I changed my board today with no problems great step by step thank you.
Great video. Thank you for sharing your skills & knowledge! Exactly what I need - mines been busted since 2008. I’ll be replacing the entire unit as mine had humidity damage - water in the actual gauge. Probably would change the whole thing anyway because I don’t think my fingers can handle the ribbon work 🙂
Today I tried on mine, and it was a success!! Thank you, sir!
Very good to hear. Thanks for sharing!
I went to a pick your part. Luckily I found a used one .. cost me $5 .. it works like a charm. I took the whole thing. Not just the cable. The white plastic square that just clips to the board 😎 oh and btw I didn't need to unplug that back long ribbon cable attached to the big console. I'm gangsta.
NICE video. TIP use a sewing needle etc, and make a small scratch on each edge of ribbin before cleaning. the scratch will not wipe off.
Thanks to your video, I fixed mine!!! Thank you so much for sharing
Great display fellow. I was able to get the LCD and Ribbon cable sets on amazon and it works perfectly for me ,great video very helpful ,thank you .
Thanks for your video I fixed my LCD display problem easy fixed do it yourself :)
Thanks so much for the video. I watched, followed, and got the problems fixed on my 2004 Nissan Quest. Again, Thanks!
Always good to hear stories like yours. Thanks for sharing!
Thank you very much! Install a little nervous but done well. Thank you for your video
Good. Thanks for sharing
Excellent video. I was able to replace the LCD screen on my 2006 Quest. Thank you so much
Thanks for the video it helped me fix my Nissan
I purchased my LCD from an outfit in CA. German Audio Tech. My first LCD ribbon was messed up...They sent me a replacement, very fast.. Appears to be a well run outfit.
Great! I'll try on mine, Nissan is not taking responsibility of this, around 3 years ago, I took it to a Nissan dealer, and they just said "nah, you need to replace the dashboard, it will be costly"
Great video, do you have a solution for the air bag sensor keeps flashing
Awesome video! Got mine all fixed up thanks!
Very good to hear, thanks for sharing!
Hello. Thanks for the great video. Helped me so much.
While replacing my Screen I broke the white piece that holds the screen to the board. Any idea what is it called ? Can I find it online ? Thank you
Best van ever made
Thank you for great video...I repaired my LCD display fast and effectively.
Very good to hear!
Amazing video. Very clear instructions. Thank you so much.
just did mine. thanks a lot dude it was so easy
Good to hear
Great Job dial2fast, thank you.
Thanks for your comment!
Great tutorial, ordering parts today. Thanks!
Man you do it like a pro and looks simple but i know it isn't . Thank you for showing how to replace the LCD and the ribbon and excellent detailed work love the step by step instructions .
Thank you for the comment!
@@dial2fast would you happen to know anything about the i guess it would be called secondary heater in the Nissan Quest van ?
@@kimmock3383 Sorry don't know about that.
Can you make a video on how to flush the heater core on your quest? I've been watching all your videos on the your quest and they are all very helpful. Thanks!
excellent video, the work is perfect, thank you bro
Once again, another great video from dial2fast! Followed your steps and the wife's van now has working odometer and fuel gauge. I'd like to add that the air bag light was on after disconnecting the cluster but instructions for resetting can be found here:
questdriver.com/forums/topic/airbag-light-flashing/
Many thanks!
Thanks for providing your feedback. Good to hear you got yours fixed.
I know this is a long shot but... When you attached the cable that powered the speedo and tach did the speedo needle try to reset? On mine it tries to turn past the stopping point and then reset to the 0.
Excellent video. i am currently working on my 2004 Quest and I will be installing the new LCD with ribbon cable as soon as it arrives. I have a question. I was told that you need to reset the passenger air bag warning LED, and I have also noticed my "check engine" LED is lit. How do you reset these after you complete the re-installation?
There is no reason you need to reset the pass air bag warning light. Make sure you don't turn on the ignition with the cluster removed. AS for Check Engine Light, get a scan tool and find out what the trouble code is. That's a separate issue.
Excelente explicación. Dónde puedo conseguir ese cable por favor
FYI - 2023 prices on eBay for the LCD with ribbon cable installed is less than $20.
Thank you so much .... I changed my with your help and it works really good.. thanks so much for the video
Ohhh, and they're currently $20 shipped on eBay for a new LCD screen with ribbon cable. Nice!
Thank you so much for this helpful video! I was able to get my 06 Quest fixed up with your help. I noticed your Quest has the same whine noise as mine when you started it at the end. Do you know what causes the whining noise?
for 2006 quest there are 6 phillip screws to be removed instead 4
Excellent video! I replaced my LCD display in my 2005 Nissan Quest today and it went fine thanks to your help. I do have one small issue. Instead of tacking the repair of the ribbon, I bought a new LCD with a ribbon from a re-seller on Ebay. Much easier. The display is fine, except a few of the areas are real dim. Two of the gas gauge lines are visible, but barely. One of the engine temperature lines is also very dim. And one of the odometer numbers is missing the bottom line. So it is much better than before the repair, but still a bit disappointing. I was very careful about installing the ribbon and made sure it didn't get pinched when I fit the board back down into the dash assembly. So I'm wondering if you have any theories as to why this is happening? is it possible that I got a faulty LCD display? Or do I have some sort of install deficiency. I might add that it is quite cold today. Could it be temperature sensitive? Would appreciate your opinion! And a huge thanks for the Quest videos. Keep 'em coming!
My initial thought is the problem has to do with the quality of the LCD. The numbers and the lines come directly from the LCD itself. The lighting comes from the LED's that are soldered on the circuit board. I don't believe these replacement LCD display you buy from eBay are OEM. If you want you can try removing the ribbon cable and reinstalling it but if that does not fix it then its a problem with the LCD itself.
+dial2fast
That is my suspicion too. I plan to call the LCD supplier tomorrow and see if they may have any ideas or suggestions, but I'm prepared for them to suggest that I may have done damage when I installed it. While that is possible, I still think it is worth a phone call as I took great care handling the LCD and ribbon. Last resort is the possibility of a low eBay rating in the event they just tell me it's my fault. Thanks for the quick response!
Wow, like a surgeon!
Great video. I'm also have a problem with the dash lights dont turn on all the time. If I give it a love tap the lights will turn on. Please advice what should I do
Video worked like a charm, thank you very much 😎
Excellent work!
Very well done!
Thank you for the information because it is really helpful
thank you so much for your help with this video, i did it myself today, and things went perfect. however the in cabin air filter wouldn't come out can you do another video about it please? i removed all the nuts and everything but it seems to have a black metal keeping it stuck inside.
Sorry I sold my van already. But did you watch my video on replacing the filter on the van?
dial2fast yeah i did watch it but hard time freeing the filter, but thanks anyways
excelent video, but what liquid do you use for clean LCD Ribbon place ?
Thank you for the video it’s help a lot saving time and money 👍🏽👍🏽👍🏽👊🏽
Wow nice close up of it working correctly! Lol
Escellent video I appreciated that thank you a lot.
Thank you for the video was helpful
Awesome. Thanks for posting this. Really appreciate it.
+ZaphodBeebleBrox Glad to have been able to help!
does anyone know how to fix the MIL/engine lights cluster section? my Quest have codes, but the Engine light and other lights on the right side, is not lighting up on the dashboard.
You are professional
Heating original ribbon cable also works : no cost repair
Thanks for your Video, i'm going to fix my!!!
Thank You so much! keep making videos!
Thank you very much!!
where did you get that tool attached to the drill at 2:30
Lowe's, $30.
Excellent diy video