Donde está mi oil pressure?!!!!
Вставка
- Опубліковано 16 жов 2024
- Finally had a moment in the Honda library to open up my JDMGSR bottom end to figure out why I have zero oil pressure when my car is operating temperature.
Spoiler alert I still don’t know
Socials
@civicstar98
@zerocoolslostempire
#california #gsr #civic #civicek #ek #ekhatch #hatchback #honda #Diy #local #civicstar98 #modified95 #bseries #maintenance #b18c #b16a2 #integra #integratypeR #p73 #typeR #twitter #sports #skunk2 #automotive #taylorswift #cleanup #china #ohioisfortoxiclovers #b18a1
All videos and dialogue are original content. Credit given for any material I don’t own. No copyrighted music or pictures are used. All addition sounds are fair use from the VN video editing app. The audio in this video is from the band #NDT This track was recorded at lucky chicken ranch by the owners Ray & Sullivan. It is used with their expressed written permission.

Check your bearing clearances with plastigauge. That crank looks like it's been turned. Too much clearances could definitely be your issue. Also open up your oil pump and check the gears. Those main bearings look perfectly fine. That's how they look out of the box. Use the old bearings to check your clearances.
Ok thank you I have some plastigauge now just need time to try it. I feel like that’s all it could be at this point.
Bearing clearances as mentioned above would really be the only problem I could think of also. Oil pump is new as you mentioned before so that shouldn't be a problem.
I want to know if you had good oil pressure before and then it starting losing it? Really trying to figure out if you have a gauge problem possibly and actually nothing was wrong with the engine. Bearings look fine.
BTW, I don't know if this is place to ask or not so I will probably hit you on IG also. I am looking for some b series vtec head parts. Wondering if you have any leads on that stuff in your area.
Heck yeah bro have a b18c and a couple for parts b16 heads. But if your know 4 real time you’re like 4 hours north but a pretty straight shot down on the 5.
So for the gauge we tapped into the back of the head where people do the ls/vtec oil line. And then just the low pressure light on the dash would confirm what the gauge was saying.
Head was clean and so was the block and journals so I think after getting the crank fixed back East my measurements were off.
@@civicstar982 I do know 4real time actually. Long time friend of mine. I don’t mind pay for shipping. I did message you on IG
Do you have all the rocker pins one small one medium they could have got mixed up and think they go in certain order in Vtec assembly
I can check that since it’s taken apart. And I want to explore every avenue before it goes back together. Thank you 🙏🏾