How to Replace Passenger's Side CV Axle 2009-2014 Ford F-150

Buy Now!
New CV Axle Assembly from 1AAuto.com 1aau.to/ic/1AAC...
This video shows you how to install a new passenger side CV axle in your 2009-2014 Ford F-150. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This process should be similar on the following vehicles:
2009 Ford F-150
2010 Ford F-150
2011 Ford F-150
2012 Ford F-150
2013 Ford F-150
2014 Ford F-150
🔧 List of tools used:
• Pry Bar 1aau.to/oWR/1AX...
• 13mm Socket 1aau.to/obCB/1A...
• 18mm Socket 1aau.to/oamr/1A...
• 21mm Socket 1aau.to/oamr/1A...
• 8mm Socket 1aau.to/obhM/1A...
• 1/2 Inch Impact Gun 1aau.to/ouN/1AX...
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/obG5/1A...
• Swivel
• Torque Wrench 1aau.to/oaK6/1A...
• Anti-Seize Grease
• Bearing Grease
• Gloves 1aau.to/oajp/1A...
• Safety Glasses
• Floor Jack 1aau.to/oaaq/1A...
• Hammer
• Jack Stands 1aau.to/oXC/1AX...
• Rubber Mallet
• Wheel Chocks
Subscribe: / @1aauto
For More Info visit us at 1aau.to/h/e8Z/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money

[@mashdatrashvideos2831]

Great Video, since new trucks are 80k with 8% interest I will be keeping my 2011 5.0 f150 Lariat (one of the Best trucks ever made)running for 5 more years, it is good to know we can fix anything on these trucks

[@ChiNguyen-wf1qt]

136 foot pound torque for caliper mounting bolt. Manual call for 184 foot pound?

[@tonymonastiere8510]

Very nice enunciation of the problem to be rectified. Nice job! 💯🗽🇺🇸

[@JaseFarbe]

Thank you so much. Will be buying a raptor soon!

[@ketanamin6677]

Show something on mass air flow sensor cost and how long it takes to replace/repair please.

[@lilstevo74]

Why no new axle seal since you had it appart?

[@jarrodwitek3467]

What do you do when the bolts that go thru the knuckle spin freely??

[@AKB_48]

😊this tech does some nice work

[@georgefullbattery9085]

what would be some signs that this part needs changing, how does the problem present. THX

[@1AAuto]

+George Fullbattery We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@larryblackburn3109]

Nicely done

[@coreygravely6]

Is no one going to mention the gigantic rust hole(or about to be) in the frame?

[@juan8073]

Nice 👍🇺🇸✌️

[@DanielGarcia-zz9eg]

That's a rust bucket truck.
Get rid of it.
Great information