Hexacopter Drone Build Project - Part 15 Peripheral Updates

Поділитися
Вставка
  • Опубліковано 4 лис 2024

КОМЕНТАРІ • 6

  • @jacqueschaillet7913
    @jacqueschaillet7913 10 днів тому

    Nice flight very smooth well done. 😍

  • @yancymuu4977
    @yancymuu4977 10 днів тому

    Good to see you back online. On your 2nd here4 gps, I believe one can use the pair as a yaw sensor. On my drone, I found that the compass in my Pixhawk 6c was not very accurate and causing poor performance. I switched to the here4 compass as primary for much improved stability. The online ArduPilot compass evaluation tool was extremely useful to evaluate and tune compass parameters. ---- good flying

    • @timarcher52
      @timarcher52  10 днів тому

      @@yancymuu4977 good hearing from you! good points on the compass. I disabled the internal compass on the cube too. For the online compass tool, are you referring to the online magfit tool?

    • @yancymuu4977
      @yancymuu4977 10 днів тому

      @@timarcher52 yes. That's it.

    • @timarcher52
      @timarcher52  10 днів тому

      @yancumuu4977 actually your commented prompted me to do some googling and found some more new stuff to learn. There's a wiki page on GPS for yaw: ardupilot.org/copter/docs/common-gps-for-yaw.html
      This prompted me to write this forum post to ask more about it. Hopefully someone from the ardupilot team can help me learn more about it.
      discuss.ardupilot.org/t/dual-here-4-gps-for-yaw-moving-baseline-questions/125428
      Thanks for your comment! Everyday is a new learning experience with this software.