Fill-Rite FR1210G Fuel Transfer Pump Install Video
Вставка
- Опубліковано 10 вер 2024
- TG Fill-Rite FR1210G Install Video
Product Links
FR1210G: amzn.to/2XN2esx
Filter Kit (w/ filter): amzn.to/2JlZKYI
Thanks for watching! Please like, comment and subscribe.
Video Produced by Thrifty Garage (Please Subscribe!)
/ thriftygarage
Find us on Facebook (Share!)
/ thrifty-garage-1571631...
Connect on Instagram (DM me!)
/ thrifty_garage
12 VDC: 12 Volt DC Pump with Hose and Manual Nozzle
Model: FR1210G
12V DC, 15 GPM heavy duty, cast-iron, rotary vane fuel transfer pump. Designed for gasoline, diesel, biodiesel up to B20, E15, kerosene and mineral spirits. Includes pump, ¾” manual nozzle, ¾” x 12” hose with static ground wire, 18’ battery cable, and 20”-34” steel telescoping suction pipe. UL/cUL, ATEX, CE motor. Two-year warranty. Made in USA.
Features & Benefits
Up to 15 GPM
1/4 HP motor
UL/cUL listed motor
Compatible with Diesel, Gasoline, Kerosene, E15, Biodiesel up to B20
2 year warranty
2 in. threaded base for tank mounting
Heavy duty cast iron construction
Cast bronze rotor with bronze rotary vanes
Built-in strainer
12 ft. hose with static wire
Replaces FR1210C
As Always, Thanks for Watching!
- TG (Thrifty Garage)
Business Inquiries:
2401 E. 32nd Street, 10-248
Joplin, MO 64804-3177
thriftygarage@gmail.com
#fillrite #fillritepump #transferpump
FR1210G Install Video,Fill-Rite 1210G,fill rite 15 gpm,fillrite,fill-rite install,fillrite+,fill rite fuel pump installation,fillrite pump wiring,fill rite 15 gpm pump,fillrite pump installation,fill rite,fill rite pump installation,fill-rite,Fill-Rite Fuel Pump Installation 15 GPM,FR1210G,fill rite 20 gpm,fuel transfer pump installation,fuel transfer pump,ThriftyGarage,fillrite+ pump install,pump,diesel transfer tank,fuel pump,diesel,fuel,transfer tank pump
Water block is a must. You'll just about eliminate problems and filter changes on your tractors and equipment unless you throw a dirty fuel can in the middle. The water block filters Tractor supply sells catch water and dirt. If you have dirt problems you can ad a standard filter to catch the dirt first as the filters are a lot cheaper. You don't change a water block filter till it pumps so slow you can't stand it or you worry about the pump.
When mounting the pump, separate the pump from the fill tube flange with the 4- 7/16 bolts. Install the tube and flange in the tank and then mount the pump and the screen to it. Makes spinning the bung in the tank easier without having to spin the whole pump
Short and to the point. Thanks
Thanks for watching!
can someone please tell me what the red lever beside the on/off lever is for
What is the thread paste you used? I just bought a tank and pump and was curious.
You can also be fancy and place a correct size swivel fitting coming out of the filter head into filler hose ;)
Great idea!
on both ends of the hose? As in after the filter and before the nozzle
does it take forever to fill up ? I’m looking to get one for my fuel tank but i don’t want to pump it forever . I need something I can easily make a quick stop to fill my tank up if needed . I don’t want a slow pump.
It's pretty fast. I've used it to refuel my truck since I don't use off road red dyed diesel. For equipment, much quicker than 5 gallon gas cans. And less messy to boot! Honestly when refueling my truck it doesn't feel like much more time than it would at a normal fuel station pump.
With a filter you will get 10 to 12 GPM
Bought same one mine was a water filter after the pump and it runs slow even after I changed the filter out thinking about buying a different pump
Great video bud!
Thanks!
nice vid :) i have the same pump.. love it.. :)
What can I do if the opening of the tank is too big for the pump? I can't seem to find a fitting for it...
Worst case you could have a welder install the right size bung. But I’d suspect that a commercial plumbing supply store would have the right reducer for your application.
is your pump outlet a 3/4' female? I purchased a 3/4' Flll-Rite filter head with pipe extension (1200KTG9075) and the pipe extension I assume is 3/4' and it is smaller than my pumps outlet threads
@Thrifty Garage
I’m pretty sure it’s 1” but you might check out the unboxing video.
Next step throw that nozzle away and get an automatic shut off nozzle 😂
fill that fucker up till she pukes bud xD a lil diesel keeps the rust away. wipe er down if you want to i suppose.
Where's the wiring video? Can't locate it on your channel
It is titled “How to Wire Fill-Rite Fuel Transfer Pump”
To avoid the dripping after filling, raise the hose up above the inlet allowing the hose to empty. Having fuel constantly dripping onto the bed of your truck is not a good idea.
Puede elevar unos 4 metros la gasolina??
No, 8' max lift height at sea level.
Where did you buy those 90 degree elbows at ?
Home Depot iron pipe from the plumbing section. I’d get the galvanized so it doesn’t rust.
@@ThriftyGarage thanks man didn’t think you were going to respond 👌👍
Por k mi bomba no bomvea continua mente parpadea
I know this might be a silly question, but does it have fuel at the end of the suction tube? Depending on when this was purchased Fill-Rite has a limited lifetime warranty. You can call customer service at 1-800-634-2695.
How to order,im interested
Use the Amazon link in the description. There are also many local distributors if you need it today.
Hey that fuel gun is still leaking fuel man 🙄
There was some residual fuel remaining in the nozzle. I didn’t “shake” it off well enough.
Shut the pump off and release the pressure in the hose so you don't like diesel all of your truck. Kids these days
Hes older than you...... lmao
95 gallons of on road diesel for equipment? Not very thrifty :-D
In the state of Missouri they don't have red dyed diesel. You have to file Form 4923 to claim a refund for fuel used in off highway applications.
Thrifty Garage not true at all. I was just in Missouri and was getting red dyed off road diesel daily.
In Utah you can buy on road diesel at Costco for cheaper than the red dyed diesel.
where is the how to wire video?
It will be in a future video. Are you installing a transfer pump? Wiring is fairly straight forward.
Wayne this video is now live. Be sure and check it out!
Are you hooking the fuse to negative or positive
I hooked it up to the negative battery post. Some will recommend a connection near the positive battery post but in reality it will work either way. If the fuse is blown it will prevent power from flowing through that circuit.