1s 65mm whoop Build (lame)

Поділитися
Вставка
  • Опубліковано 13 січ 2025

КОМЕНТАРІ • 21

  • @PothocketsFPV
    @PothocketsFPV 22 дні тому +2

    ATTENTION! Before building with a newbeedrone cockroack frame, make sure that the c clip holding the motor together is not being held in place by the hole in the center of the motor mounts being too small.
    I had a set of motors i thought were DOA because of this. The holes on this frame can be widened with a drill bit.

    • @TargetFPV
      @TargetFPV  22 дні тому

      Thanks for the info! I checked and it is really quite "tight" ,but for HM motor only ,the betafpv motor c-clip seems smaller and fits smoothly.

  • @FpvBudgetBuilds
    @FpvBudgetBuilds 23 дні тому +1

    Great build, brother. Im just getting ready to order one of those boards for a 75mm 1s build.
    Looks like you have a great little whoop there. 👍👍

    • @TargetFPV
      @TargetFPV  23 дні тому +1

      Thanks! I've been using BetaFPV 4in1 FC for a while now and it still works ,but the new matrix is still fresh ,so I don't have much experience with it. One positive thing is that it is cheaper (for me) than AIOs of similar capability. And it is much easier to use a board than to put a separate VTX or RX on it. Although, if it dies it takes everything :)

  • @GR8SCOTT
    @GR8SCOTT 18 днів тому +1

    Nice one!!! She's a ripper!!!

  • @drony3miasto
    @drony3miasto 22 дні тому +1

    Nice build! I am going to build some whoops on matrix AiO but I will definitely remove the plugs and solder the motors to the board directly. It's better to do it immediately during construction instead of after a few weeks of flying and crashing - I speak from experience :)

    • @TargetFPV
      @TargetFPV  22 дні тому

      Thank you! Without the connectors I would gain a few more grams, but I didn't want to solder it :) I'll leave it for now, so when the connectors get tired, I'll solder.:)

  • @Krzxy9
    @Krzxy9 22 дні тому +1

    So cool. Really want to get into fpv but no money❤

    • @TargetFPV
      @TargetFPV  22 дні тому +2

      Thanks! Worth looking around the second hand market , many people are switching to digital or just getting bored of fpv. I had no money for anything either , when I was a kid we had to save money , because we lived almost from one month to the next . My classmates wore cool clothes, I wore second hand, they had BMX and montain bikes, I had a crappy bike. I had a computer, and only years later than others (c64). The only RC car I had as a kid was a wire car. I live in a country where taxes are taxed, we have the highest taxes in the EU. My salary is worth less than anywhere in the EU. Now over 40 it is a hobby that helps me relax and is interesting for me. Someone changes their phone every 3 months, even the more expensive ones, I can use a low end one for years. What's important for who, for me cheap shoes are good , so I have enough for fpv stuff ;)

    • @Krzxy9
      @Krzxy9 22 дні тому +1

      @TargetFPV totally get you man thank you

  • @Dawe957
    @Dawe957 22 дні тому +1

    Following

  • @JackalFPV
    @JackalFPV 23 дні тому +1

    Nice build! Its solder free right?

    • @TargetFPV
      @TargetFPV  23 дні тому +1

      Thank you! Yes, you don't have to solder it. My other whoop is soldered and made of nearly similar parts but still 2-3g heavier. My scales are not very accurate but I can see the difference. I will be curious to see how durable the frame is ,because I have an air65 frame ,but I managed to break it ,anyway maybe I just had no luck ;)

    • @JackalFPV
      @JackalFPV 23 дні тому +1

      @@TargetFPV o.g. Meteor 65 frame is holding up very good to crashes for me :-)

    • @TargetFPV
      @TargetFPV  23 дні тому +1

      @@JackalFPV I also really like the meteor65 frame and I've used it most of the time because it can handle the crashes. I have a few to spare if the newbeedrone frame gets tired :)

  • @steazoxgaming
    @steazoxgaming 21 день тому

    you are french ?

    • @TargetFPV
      @TargetFPV  21 день тому

      No :) I am Hungarian.

    • @steazoxgaming
      @steazoxgaming 21 день тому

      @@TargetFPV ok so why did you know we are fpv

    • @TargetFPV
      @TargetFPV  21 день тому

      @steazoxgamingBecause if I am not French, I cannot download and use the model? They put it in a public place where anyone can find it and download what they share... And I was mean enough to share where I downloaded it from and who made the model, shame on me!