Love this video but this blaster has been just a headache for me I think my friend is starting to get sick of me asking if I could borrow his soldering iron 😂
Cheers brother 👌 tho I have found it's like a Chinese lottery really. 😂 I say that cause it's pure luck of the draw I've sent some back. Luv your comment brother 💪 I bet your AWESOME at soldering tho 😂 . Tho shit not working is a pain in the ass and we should in all honesty be given far superior product for our money . Gas blowback still have shit loads of drama tho still I will get a TTI 😂. I've just got use to shit products so sad EY. Tho luv your comment brother 💪 style points awarded 🔥
@@maxb8840 yeah 🤣😅 U need low power or good hand to solder chipsets U must be a master I would have done damage to the board than to the actual blaster at that point lol 🤣 U do well persisting ☑️
@@Sean-lm7my luv it bro 💪 alway up to try try new things and keen for suggestions . I Just go through things I have and not found much information on and try and be as transparent as possible truth is key👌 Thank again bro. Regards blaze Oztrek Gel ☑️
Great video mate. My one only works on the 14v with the flashlight attachment the batteries in the blaster seem to be dead, is it difficult to do a battery change, are they just plug and play, or do they need soldering
Do you mean the battery? Because the extra voltage comes from the shore fire flashlight on this one. So I don't think it will fit skdg18 The barrel could converted at a pinch . They'd be better off just getting an m92. I just had a look at it again the internal motor is essentially the same so you could use some parts between both of needed . If you do get a new barrel it's 7.1 mm so you need to control grow the gells💪
@@oztrekgelsoft8409 there’s a new Skd g18 that’s got the same flashlight battery as this beretta, just wondering if the suppressor kit would fit it too
@@SkitzWallaby I didn't know there was a new one out I've been out of it for a little while Now. I would definitely give it a go because you could make it work even if it didn't straight bolt on. And I am a fan of custom blasters. I would give it a go. Just make sure if you do to control grow your gels. If you just throw some old ones through it they might get logged and bust up . Hour and a half I did for em and they go hard.. Other option is just cut a spare gel blaster barrel and fitted with air hose or heat shrink will do the trick also.. that's for pipe with no thread
@@oztrekgelsoft8409 thanks, also do you know if the t piece that comes with this is plastic or not? and would it be easy to shorten the barrel from the receiving end and reattach the t piece? Would that be possible? From measuring the g18s barrel it’s 8.9cm long so much shorter then this one your reviewing I believe
@@SkitzWallaby if you shorten the barrel on the receiving end you will have to customise Howitt attaches to the T. And yes it is abs is plastic. Or you could just use a longer barrel and put a flash on the end 🤞
Yes it's cheep and reliable last extra long with surefire light as battery it's best of the cheep blaster I have to and API also GBB and they need filling Evey minute. Tho are lots of fun. But value and the reality is the Beretta will do everything the same cheepest and reliable witch GBB are not. Hope that helps 💪👌
@@levi.k4017 for the price you pay for it it's well worth it it does things the others can't has extra battery capacity and is a very reliable platform is hot the most powerful but has about the same distance as my gas blow backs and it's a lot more reliable is actually the perfect little side piece. Because it's not heavy it's easier to use and it's very accurate so for the price that you pay for it it's well worth getting are still carry one even with a gas blowback CO2. Because when you run out the m92 keeps going
@@oztrekgelsoft8409 do you need the whole kit to put a silencer on and a hop up I’m new to gelsoft and would like to know so I don’t have to spend to much money if I don’t have to
@@freedomparkour4470m.zhenduotoys.com/SKD-M92-Beretta-90-Two-Metal-Barrel-T-piece-p746028.html Yes you need the barrel for the silencer to fit right and it's also a tight bore so hour soak time for gels
I found that putting one or two nylon washers behind the back spring gives it a nice little increase
Perfect 🙌
Love this video but this blaster has been just a headache for me I think my friend is starting to get sick of me asking if I could borrow his soldering iron 😂
Cheers brother 👌 tho I have found it's like a Chinese lottery really. 😂
I say that cause it's pure luck of the draw I've sent some back.
Luv your comment brother 💪 I bet your AWESOME at soldering tho 😂 .
Tho shit not working is a pain in the ass and we should in all honesty be given far superior product for our money .
Gas blowback still have shit loads of drama tho still I will get a TTI 😂.
I've just got use to shit products so sad EY.
Tho luv your comment brother 💪 style points awarded 🔥
By good at soldering do you mean constantly burning my hands 😂
Also where did you get the kit
@@maxb8840 yeah 🤣😅 U need low power or good hand to solder chipsets U must be a master I would have done damage to the board than to the actual blaster at that point lol 🤣 U do well persisting ☑️
@@maxb8840 I'll link U my brother 💪
You should do a video on how to mod the Glock drum to beretta drum
Great idea brother 👌
Just found your channel and I finally found one that actually posts and posts good content.
@@oztrekgelsoft8409 Because I think I’ve only seen one small video on it?
@@Sean-lm7my luv it bro 💪 alway up to try try new things and keen for suggestions .
I Just go through things I have and not found much information on and try and be as transparent as possible truth is key👌
Thank again bro.
Regards blaze Oztrek Gel ☑️
Great video mate. My one only works on the 14v with the flashlight attachment the batteries in the blaster seem to be dead, is it difficult to do a battery change, are they just plug and play, or do they need soldering
Plug and Play 💪
Will this fit the Skd g18s 14.8v? When I was at the sore picking between the two blasters the guy said they have the same internals
Do you mean the battery?
Because the extra voltage comes from the shore fire flashlight on this one. So I don't think it will fit skdg18
The barrel could converted at a pinch .
They'd be better off just getting an m92.
I just had a look at it again the internal motor is essentially the same so you could use some parts between both of needed .
If you do get a new barrel it's 7.1 mm so you need to control grow the gells💪
@@oztrekgelsoft8409 there’s a new Skd g18 that’s got the same flashlight battery as this beretta, just wondering if the suppressor kit would fit it too
@@SkitzWallaby I didn't know there was a new one out I've been out of it for a little while Now.
I would definitely give it a go because you could make it work even if it didn't straight bolt on.
And I am a fan of custom blasters.
I would give it a go.
Just make sure if you do to control grow your gels.
If you just throw some old ones through it they might get logged and bust up .
Hour and a half I did for em and they go hard..
Other option is just cut a spare gel blaster barrel and fitted with air hose or heat shrink will do the trick also.. that's for pipe with no thread
@@oztrekgelsoft8409 thanks, also do you know if the t piece that comes with this is plastic or not? and would it be easy to shorten the barrel from the receiving end and reattach the t piece? Would that be possible? From measuring the g18s barrel it’s 8.9cm long so much shorter then this one your reviewing I believe
@@SkitzWallaby if you shorten the barrel on the receiving end you will have to customise Howitt attaches to the T.
And yes it is abs is plastic.
Or you could just use a longer barrel and put a flash on the end 🤞
do you recommend this blaster to anyone who is just getting into gel ball?
Yes it's cheep and reliable last extra long with surefire light as battery it's best of the cheep blaster I have to and API also GBB and they need filling Evey minute. Tho are lots of fun. But value and the reality is the Beretta will do everything the same cheepest and reliable witch GBB are not. Hope that helps 💪👌
I can’t decide if I should get this or the 3dg G17? What’s better?
The m92 is cheaper now and it's really reliable I would go the m92 as G 17isnt can have issues
@@oztrekgelsoft8409 ok thanks, is it powerful the m92? And does it feel light and cheap?
@@levi.k4017 for the price you pay for it it's well worth it it does things the others can't has extra battery capacity and is a very reliable platform is hot the most powerful but has about the same distance as my gas blow backs and it's a lot more reliable is actually the perfect little side piece.
Because it's not heavy it's easier to use and it's very accurate so for the price that you pay for it it's well worth getting are still carry one even with a gas blowback CO2.
Because when you run out the m92 keeps going
@@oztrekgelsoft8409 ok thanks
where do you get the upgrade from how much and could you put a longer silencer on
Few people selling them now.
I got mine hear m.zhenduotoys.com/SKD-M92-Beretta-90-Two-Upgrade-Kit-p745762.html
@@oztrekgelsoft8409 do you need the whole kit to put a silencer on and a hop up I’m new to gelsoft and would like to know so I don’t have to spend to much money if I don’t have to
@@freedomparkour4470m.zhenduotoys.com/SKD-M92-Beretta-90-Two-Metal-Barrel-T-piece-p746028.html
Yes you need the barrel for the silencer to fit right and it's also a tight bore so hour soak time for gels
Yo where do u get the metal barrel upgrade?
www.zhenduotoys.com/products/skd-m92-90-two-metal-barrel-t-piece-thread-protector
Hopefully this helps man,💪
Renegade blasters also stock em
Link for the parts used in this video for the barrel upgrade
Just Google m92 blaster Metal barrel and it should be easy enough to find. You will need to control grow gels tho
I gone off battery pistols..move to CO2 and green gas
Also if you get a tracer can you show it on the beretta?
No problem Brother 👌 I'll swop it over and do a short episode MSR kit coming also just been busy and in able to rec it. Legend Sean thanks bud 💪
@@oztrekgelsoft8409 Thanks, because I want to do the same mod with a Glock, but didn’t know if a tracer would actually work
hopper fed makes a pistol look so ugly