Відео

@@isaacsurya4962I think it is the same

@@oztrekgelsoft8409 ok mate thanks🙏

@@quockhangluu8842 I would Bro 💪

I had lil issue like that and it led me to replace it with Metal bolt. It might sound silly but make sure that you have the battery in the clip charge Up And have control grow gels. 7.1mm is best. About 3hours . Also take it apart and get some silicon and go through the piston make sure it's got plenty. Hopefully this works . Also might sound silly again tho if bolt gets locked up check the safety sometimes it locks. I've had absolutely none of these issues with the AWM and I upgraded both the same and some how have more bold issues with the MSR even though it's the same manufacturing and parts essentially other wise silicon gell ad check all O ring's. Happy hunting

@@oztrekgelsoft8409 thanks mate, I’m new to this. I been firing the 3DG G17 and it was loads of fun, and all of a sudden it stops expelling any gels now.. so that’s another issue.. literally just got these shipment from Tactoys yesterday

@@wubwub4099 keep it up it's a lot of fun 🙌👌

Legend Bro 👌 hope you enjoy ot. Yes hop UPS are still not the best tho if you use aka tenacity gels is more accurate and you can now get 8mill clay Ball's 🤘👌 and also 8mill paint ball's although I run 7.1 bore so I do control grow

🔥🔥🔥

Cheers brother 👌

Yea good point it hits around 350_400 now, tho correct brother 👌 cheers for the comment🔥

The shop is now closed down or changed names tho if you search for it I'm sure you will come across it sorry I can't be any further help bahn 🤘🔥

Zhenduo sells a metal bolt kit for around 120$

Just google MSR gel blaster and I'm sure there is someone who is selling it . The place I got it ha changed name or no longer exists as far as I know tho it should be easy to find 💪 happy hunting it's a cool replica weight and size hope you find One

should i use awm metal cylinder for replace msr plastic cylinder

@@quockhangluu8842 tăng fps cho cây m40a6 văng shell thì mình up gì vậy anh

Just Google m92 blaster Metal barrel and it should be easy enough to find. You will need to control grow gels tho

Just look Up MSR gell blaster Metal piston kit they should still be available

Was using mine yesterday still works like a charm . Just make sure li-po batt is in correct and it's on semi and make sure contact on mag fits

@@oztrekgelsoft8409 I’ve done all of that lol. Only got it yesterday and haven’t been able to turn it on or get it to work. I’ve triple checked everything. Hoping it’s not faulty

@@oztrekgelsoft8409 is there an on button somewhere? Is there a way or do I have to prime the mag?

@@pfizer2457 sorry about the late reply. Just make sure that you have gels that are around 7.1mm. Meaning that you have a control groe on them as in 2.5_2hours. Then give the blaster at least 5 single shots before it feeds. it should feed every shot after that just make sure that you clean the blaster after every you don't leave anything. If Or blaster. And you should have no trauma reusing it anytime you want

@@pfizer2457 I'm actually just using my AWM at the moment and it has a mag Fred or prime.. Tho just keep sorting through bugs. And you will have alot of fun.. It's the most reliable blaster other than a single shot

Aka tenacity you need to do control grow 7.1m not 8

Alright, but if I grow them to 7.1 can I store them for a while without them shrinking?

@@zchiken yep absolutely. I just did some the other day for my AWM which has a really tight bore. I put them in a container with a lid.. Put a few extra so that when they grow that compress against ea other. With lid on. You Can leave him in there as long as the lid is on and they will stay at 7.1occasionally just fill it up with water and drain it back out because they need to be wet to slug harder tho don't leave water in container as they will keep growing to 8

Thanks I just tried it and it finally fires, but with the longer barrel on right now it’s only hitting a max of 160 fps. How long do you think is good for the ultras to soak? I saw some sources say 3.5 hours but I still feel they might be too big for the smaller barrel.

@@zchiken 1/2 2 hours. Until they are just soaked through. Buy overfilling a drink container it will compress the size of them as well.. You should be getting more than 100 60fps out of.it. Are you using an original piston.. I'll have to. Rebuild my MSR as it is having firing issue similar to you. Although it has a piston and hits around 250-300fps.. .. this just happens when they're not cleaned out of old gell and sit in cupboard for while lil service and make sure everything feeds is just part of blaster maintenance 💪 hope your having fun with it my pic of all is AWM it's never got issue like MSR all tho same builder and simular model it's is 💯 accurate and 350 PS all-day. MSR gave me nothing but drama. Although looks cool

Yeah AWM is the best one 💯. I just fitted it with new piston kit. And go bolt.

I appreciate that brother 🙌 All post it on my other channel oztrek Adventures this was a Airsoft channel. Tho good reaching out👌 I live 5 minutes down the road from where Johnny and Amber we're staying it's a very private mansion about 5 minutes down the road. That's where Johnny had his finger cut off by Amber. Reason being is it the owner Michael Doohan. Run's helicopter charters so they basically get helicopter from set to house. That's also where Tom Hanks and his wife were when covid hit Australia. I'll try and film The entrance to the property and some Google maps showing the world-class go-kart track that he has. But the Black pearl lives in the Coomera River or Broadwater in Gold coast Australia. He has to move it once every 7 days. But he lives for free with his Mrs on the boat full-time. It's surreal when I first seen it. Then I actually found out it was the real thing. I need to get another boat so I'm not relying on friends to take me out last time I seen it was about 3 weeks ago at a place called sanctuary cove. That's where the Pines golf course is world-class on PGA tour . He lives in a few spots travels from the Broadwater to Stradbroke island and sits at a place called Tiplers. Or jumping pin. I'm very interested in seeing if I can get on to see what it looks like inside. Although anyone can go around the outside and touch it no problem at all. also try and show you the filming location.. It was all done in the river so they can control the sea as it's very protected on the inside and well very tropical looking areas all islands around the place . Hopefully I can get on although I'll still film it and show the shooting location 💯. You should try and look up the Coomera River Broadwater Gold coast Queensland Australia you might just find it in a picture . And I will ask my mate if he remembers who built the boat. 💪

Ohh snapp 🔥🙌 your spot on 💯 glad someone else see's it the same way👌. He actually tried to get Russians threatening with videos to free him. Next minute NATO sending Australia to Russia for world war 3. And at this point he would be considered a fucking spy🤭 and I bet he ends up deported. As you said while the Minions groom the rise of gru 🤣. Smartmove commenting on my page💪. I find it interesting that he only used his Russian Mrs for views. It was all a little Suss from the start. They just let the evidence keep mounting until they had enough to get him were they needed. Appriciate your response 🔥

@@oztrekgelsoft8409 I commented here because they just remove all criticism from their channel, your comment is probably gone by now. I just point people to my playlist.

@@message-in-a-bottle-1979 true that🤔 we'll than that seems very corrupt. And I'm glad that I unsubscribed 🤞 Thanks for the heads up bro I'll leave it to the Minions to keep donating.🤦🏼‍♂️

I haven't done any videos in a long time but it still legal in Queensland. It's the only state left. And still very risky to own these things in other states. My page kept getting flagged by UA-cam so I stopped making videos on it hopefully this helps

@@oztrekgelsoft8409 Cheers bro for the reply still makes no sense ae . I remember a few years ago we was gonna drive up there to buy a few then they got legal in Melbourne .. So now I got a cupboard full of them witch are illegal now I guess 🙄 sold a broken awm for 4x the price on Gumtree then got banned .. so not surprised you would get flagged.. cheers

@@kandykainepowdah1987 not a problem brother if you ever come up to Queensland give me a yell I'll shout you a game. The bulshit that happened around the country and in Melbourne is absolutely despicable. You should still be able to get things from some stores and online. But it's risky. So fuked up .. But if you're ever in the goldie. I will stand by my word 🙌🔥💪 If you try advertise it maybe try because it is something else. Like water blaster or something stupid but try contacting tac edge they could maybe figure something out for U 👌

@@kandykainepowdah1987 damn🔥 at 4xthe Price 🙌

Do you mean the battery? Because the extra voltage comes from the shore fire flashlight on this one. So I don't think it will fit skdg18 The barrel could converted at a pinch . They'd be better off just getting an m92. I just had a look at it again the internal motor is essentially the same so you could use some parts between both of needed . If you do get a new barrel it's 7.1 mm so you need to control grow the gells💪

@@oztrekgelsoft8409 there’s a new Skd g18 that’s got the same flashlight battery as this beretta, just wondering if the suppressor kit would fit it too

@@SkitzWallaby I didn't know there was a new one out I've been out of it for a little while Now. I would definitely give it a go because you could make it work even if it didn't straight bolt on. And I am a fan of custom blasters. I would give it a go. Just make sure if you do to control grow your gels. If you just throw some old ones through it they might get logged and bust up . Hour and a half I did for em and they go hard.. Other option is just cut a spare gel blaster barrel and fitted with air hose or heat shrink will do the trick also.. that's for pipe with no thread

@@oztrekgelsoft8409 thanks, also do you know if the t piece that comes with this is plastic or not? and would it be easy to shorten the barrel from the receiving end and reattach the t piece? Would that be possible? From measuring the g18s barrel it’s 8.9cm long so much shorter then this one your reviewing I believe

@@SkitzWallaby if you shorten the barrel on the receiving end you will have to customise Howitt attaches to the T. And yes it is abs is plastic. Or you could just use a longer barrel and put a flash on the end 🤞

No more videos no tho yes still working like very well my favourite blaster🙌

Did u already replace the stock sear ?

@@lordreindellponce9381 yeah man it's replaced

@@oztrekgelsoft8409 how long does the stock one last ?.... when can i pm u sir ? I just had a few question

@@lordreindellponce9381 I changed it almost straight away

Appriciate bro 💪🙌not sure if I'll make anymore vids on the topic tho super appreciate your comments. I still fuk with gellsoft just most videos got marked like it was a gun so I stopped. But still have and add to my collection. And luv that you got bb's running through it. Did U use a 6.1mill barrel? Or just Change mag and tee?

@@oztrekgelsoft8409 6.01mm,length 550mm inner,custom tee with hopup,make little adjustment using double tap in mag section to feed bb, upgrade spring 1.3 just get 400 up fps..little trick to make this gun more sillent just put foam to inner barrel,make sillencer & make put little sponge in stock..then u see diffrent noice come out from your awm..then more accurate you get in 30 meter up..but i still love using gel ball no risky😅

Perfect 🙌

Plug and Play 💪

eBay brother 👌

@@oztrekgelsoft8409 are those gbb

@@bgmgio not gas blowback no 11.1 battery powered

Control grow hour and half aka tenacity 💪

Haven't tried to change it on the wells tho my Kublai was easy. Sorry I can't help you there man

Algood, time to take it to the shop,Thankyou for the reply!

@@quanny3324 no problem at all man. It's actually the only blast I didn't take apart. Tho I would Google it as it's an m4 and all wells M4 a very similar so it would just be something that they've changed within the blaster to get over copyright issues. Sorry I can't give any further help man. I'm in the middle of rebranding my channel. As I'm a musician an I will be shooting from my studio in the next month or 2. I still go to the odd game. But I'm keeping the gel blasters on the down low For time being. Hope you check out the new channel 🙌 and there's something that you like regards Chad

@@oztrekgelsoft8409 that's algood, definitely will give it a go man, all the best luck with the new year for you!

Hey man I don't run the channel any longer modifications are ok. Barbie stripping the channel soon And something from my recording studio in the future so it will be a new channel. Appreciate you reaching out if you like your music tune into the new channel 🙌

@@oztrekgelsoft8409 thanks man

No site that's real on stock blaster just a fake One. Best off getting a good one and use interchange them as you need

You need to change cv the flash on the end so it will accept a riser or something similar tac edge will have a flash that will accept hop up in a 14mill thread

Dy oil hmm I don't use oil tho I use silicon lube or gun lube . I'm rr watching to see what I said . If you can be more elaborate I'll try answer

Re checked and I only use super lube that is ordered on eBay brother 👌 use any silicon lube and grease if nessary

Absolutely I got it here hope this helps 💪 m.zhenduotoys.com/JieYing-JY-AWM-Cylinder-Kit-p745947.html

@@oztrekgelsoft8409 thank you very much

@@anhkhoinguyen5509 no problem at all hope you like it

Green Lazer sounds sick. I got pec 15 red Lazer goes through battery Fast. Tho Tracer mags are cool ay💪

The hk416D v3.0 or later aerial make a metal one also I think now

@@oztrekgelsoft8409 I am not taking it as a serious hobby and I also live in the UK but is the v3 cheap because I love the hk416 and I just want to own a toy version of the gun

@@oztrekgelsoft8409 so do you have any other solutions I mean I don't want it to be too pricey I can't tell my parents to buy it and it's unavailable

@@RetroAlex125 HK was 499 Aus when I got it so 260 pounds there about.. It's works really well man.. If it is illegal in the UK.. example gel ball is only legal in China and Australia.. 1 state of Australia Queensland Australia Left .. so you would have to look up Airsoft make sure it's legal you don't need a licence for it. And just order one . The internals are pretty much identical except 1 flyers a inflated gel Cristal other hard plastic BB . And you can't fire one through the other. So just have a look what you're state and county laws are or will be held up at custom's coz there look real.

Yes it's cheep and reliable last extra long with surefire light as battery it's best of the cheep blaster I have to and API also GBB and they need filling Evey minute. Tho are lots of fun. But value and the reality is the Beretta will do everything the same cheepest and reliable witch GBB are not. Hope that helps 💪👌

The tracer mag has a UV strip in it works fantastic by it self tho you can add a unit also tho it's not needed at all . As it works fantastic

@@oztrekgelsoft8409 thanks alot!

@@officeromar2055 No problem at all have fun💪

No the AWM is much better in almost every way possible it looks ok tho it has slight issue with metal piston kit AWM is solid all-day

Also AWM cylinder length is an inch and a half longer as the spring also MSR is lacking alot.

Few people selling them now. I got mine hear m.zhenduotoys.com/SKD-M92-Beretta-90-Two-Upgrade-Kit-p745762.html

@@oztrekgelsoft8409 do you need the whole kit to put a silencer on and a hop up I’m new to gelsoft and would like to know so I don’t have to spend to much money if I don’t have to

@@freedomparkour4470m.zhenduotoys.com/SKD-M92-Beretta-90-Two-Metal-Barrel-T-piece-p746028.html Yes you need the barrel for the silencer to fit right and it's also a tight bore so hour soak time for gels

It's great lil blaster 240fps out the box. It's sold as swift hawk Styer M40 although it is an SSG 69. I have an episode unboxing .

Hi Jeff absolutely spot on with what you have said only one thing I have seen metal pistons failed with the 1.5 spring. This might be the case for you and he's probably still worth giving it a good go. Sounds like you got all the bits and pieces on there now glad you got an AWM. I have noticed that Wells is also coming out with the exact copy of it. Although they claiming 340out box. Which is not right at All. I haven't shortened any of my videos maybe UA-cam has done something I'm trying to figure out what to do with this page as every man in their dog seems to be talking about gel blasters on their own channels these days although I will come back with some new blasters. My apologies it's a bit hard for me to remember everything you wrote although everything you said was 100% spot on and if I do keep this channel it will be 4 people just like you who take the time and are respectful. With awesome questions. Super glad you're doing cool mods. If you can put a riser hop up on it as well will make the difference. Make sure it's a riser tho nybfake ones are terrible.. Regards Chad. If you have any ideas or anything you'd like me to cover don't hesitate to ask. Respect Oztrek Gel ☑️

@@oztrekgelsoft8409 I agree, 1.5 would be pushing the limits for some actual bolt action I think. One hell of a right arm LoL. Your setup is not that much different to mine apart from my homemade spring Bwahaha... Classic fail...! Still, you can't learn what it can do till you try. I have painted mine to the same colours as I used O/S and I would like to send you an image or two of what you can do with them, apart from just the classic colours. All our weapons were painted and given touch-ups during our service, including pistols, PDW's and Medium to Long Range Rifles. That Wells version might be a GBB version as they seem to be doing a lot at that end of the market lately. As to the MSR comparison you had done, there was a shell ejecting version released at the same time and from my friend in China, he said not only was that one a fifth of the price, it outperformed the JY version OOTB by 100%. His Chrono tests also backed that up, just the shell reloading was a bit of a pain. I dunno, mil-simmers should like that sort of thing and carry spare mags :)

@@spartan19jb7 I would say 1.3 . All your custom Spring would be plenty for it I like the idea of the custom spring or one hell of a right arm 😂. I paint my blasters as well I have a palm leaf fetish lol p paint everything with Camo 😂. Others are just leave to look like the original. Fun stuff tho. I painted my fridge freezer my hot water system on the floor4x4 fun . There was a new couple of blasters I was looking at. That Wells was just spring loaded. I've been waiting for something gas blowback to come out like last 98. But I can't even find one of those anywhere . I would definitely prefer something CO2 or green gass tho some of these blasters claim to come with a 1.4 spring witch is interesting indeed. I absolutely love my GBB pistols I will do an episode on em. And have some awesome loadout gear to show also so just waiting on some GBB sniper's to come out and than I'll be super happy that Shell ejection sounds like GBB kar I personally don't like shell ejection they don't always work well tho pray for GBB sniper's or bug sprung ones to come out . If you're near Coomera we should go for a game .. Regards Chad .🍻

@@oztrekgelsoft8409 I wish I lived up there,... I'm in SA, the land of the license and registration :( Hey can you link us to that Toy shop Xanadu, I have tried searching and I get hits for Disney Pixar and eBay computer games?

@@spartan19jb7 damn Sa laws are so silly having a safe a yearly registered crazy .. Qld is doin well hopefully we can help other states come to a logical decision on the matter. The link your after is hear. www.zhenduotoys.com/products/jy-awm-metal-cylinder-kit Also just type in metal piston kit my video comes up above low Guido's lol yay bout damn time haha🤭

yeah I chronograph according to gel size weight to be most accurate so at 7.1 mm 0.19g yes these are really the results.Watch or check out the metal piston kit average of 313fps 💯

Just stick with Wells . And use good gels like alpha king aka tenacity. Other than plastic mag it's a good blaster