For the full auto kit, use a three-prong switch, and wire the extra prong to the negative end of the battery. This will for some reason stop the motor immediately when you cut the power. I'm sure the stock jam door switch will work just fine.
You're not being whiny. The battery tray is bullshit. One of the key things I was excited about was not having to carve up the shell for Lipos anymore.
Good alternative from Worker for the same $30 that buys a current production Modulus Stryfe. Of course, the real reason for the product is the assurance that Worker can continuously sell their large catalog of Stryfe dress up kits, which is a sizable chunk of their business, rather than be at the mercy of Hasbro who decides when, where, how much and how long they wish to produce and distribute the Stryfe.
Firstly, there is indeed a barrel attachment adapter that makes all of worker barrels compatible 'Worker Straight Cutting Type Interface Module'. Not surprised people don't know about it, it came out before the swordfish shell did and totally made no sense.... until now. Secondly, I installed the full-auto and also had problems with the firing but you didn't explain exactly what the problem was. There are two different configurations to have a switch cut-off the firing "immediately" on trigger release, but that wasn't my problem: my dart pusher was not moving back quickly enough to depress my switch located back of the pusher before the auto-gear contacted it for the next cycle, and this caused my runaway firing. I'm wondering if this is what you're getting too. For the moment I tuned down the ROF via the ROF adjuster on the PCB using a micro screwdriver, which solved the the problem but now my ROF is only slightly higher than a stock RS, which is kinda disappointing.
4:05 hmm "PAINTED CLEAR" yeah thats logic I hope i can do that to my self paint myself clear people would be scared they can only see my fat and organs im like😂😂😆😆 Their like🤤😫😨🤢
You need to add motor braking to the Pusher motor on the full auto kit by adding a wire from negative on the battery to normally closed on the rev switch
Cool but I’ll still prefer the stryfe since I don’t mod stuff... Coop you didn’t put the chronograph results why ? Is it because the performance is the same ?
I can only see the insides, where is the shell?
A Sandwich 🥪
And the magazine floats! What is this, witchcraft?
Whaaaaat
I can’t believe it either
A Sandwich I know it crazy
0:40 me: "Oh cool they made their own Stryfe, I hope they fixed the symmetr- oh..."
0:43
Wish they had but can see why they didn’t. Needed it to be compatible with parts
Me with my weird perfectionist mind: ouch
Where can I get this clear paint everyone has been using?
Timmitny it’s called clear coat then it’s clear whoa 😮
Allen hasbun I tried that why didn’t it work?!
you're using the wrong brand obviously
It’s called flex seal
I want it too
"They painted it clear." - Coop772, 2018
👍
More like coop772, 2016
I'm pretty sure that's when he first said it
Might Be A Hanzo Main woosh
But it’s not true clear paint or else you would see the jolt inside😂😉😜
AB Games and Films r/whoosh. it was a sarcastic quote.
For the full auto kit, use a three-prong switch, and wire the extra prong to the negative end of the battery. This will for some reason stop the motor immediately when you cut the power. I'm sure the stock jam door switch will work just fine.
How much for the clear paint? Who's your supplier?
A Harris i think it's Lowes or maybe home Depot
Day 372: we still are searching and scouring the planet for the rare clear paint
A Harris the orbit base drops a suply-drop to Coop
No it .came from dusty
A Harris remember, it's illegal so you'll need to do some deep web browsing
*insert "i painted it clear" joke here*
Lucas 98 glass is just sand painted clear.
Wack
Where is it
I painted it clear
"BZzzzzzz"
I painted it clear
Dam I just realized I’ve been watching this dude for over 4 years😂
Inigo Middleton same
Tomorrow for me it will be six years (check date of written comment)
Same
Same
Same omg ia m a adict
“They very *clearly* made it for modders”
-Frank Cooper 2018
You're not being whiny. The battery tray is bullshit. One of the key things I was excited about was not having to carve up the shell for Lipos anymore.
And they did so much of it well. But goddamit... does the chinese NIC still use a lot of IMRs or something?
Rory Stevens probably
4:03 the entire shell is "PAINTED CLEAR" 😂
Love Frank's sense of humor 😂!!!
Me too
Same here
Me 3
Me 4
THE ULTIMATE JOLT RESKIN
I know you probably won’t see this comment, but if you do, could you please tell me what motors you’re using in the modified swordfish?
Burtonma 07
a 670 corola motor
@@hdexotic1914 I dont know since im not a modder,but all i know that it's an industrial grade flywheel which cost a bit of a fortune
Yes motors along with FPS would be awesome!!
7:22 it blaster so powerful, that demolished blinds!?
Worker should make an aftermarket deploy THAT WOULD BE AWSOME
Yesyesyesyesyesyesyesyesyes
They exaggerate the blaster a bit, so it would be even worse. If they made it bigger, it would burn much better.
7:22 ha broke his blind on the right side of the screen !!!!😂😂
Me: Finally a clear stryfe, now the clear Kriss Vector kit will actually match!
Worker: *Sends a clear Kriss Vector kit that is blue*
“As you can see, the shell is painted clear” hmmm 🤔
The color combo with the kriss vector is amazing, the frosted clear goes great with the translucent blue shell
I put I massive lipo in a stock modulus and caught fire in my room lol
Completely 100% stock?
XD
I have a question after seeing the IMRs being the same size as AAs. How well do IMRs work with stock motors/flywheels?
The dislikes are from Nerf because Worker made another reshell 😂
For one of those really buffed up and big flywheel kits, will you have to still cut the outside part of the cage for it to fit?
Did you put a Xbox notification sound for the magic at the beginning 👌😂
4:08 "it's painted clear" *BRUH*
4:03,
Welcome to coop772
Hmmmm I actually like how the flywheel housing protrudes out a bit of the shell. And since it's clear, even more tacti-cool! :D
I swear he must have a hoover just to collect them nerf darts on the floor lmao
2018 coop: "it's a swordfish scale but i called it dragon scale"
2021: *Dragon power series*
Painted Clear I need that paint quick. Does Worker sell paint. I need this now.
7:21 good job, coop.
"Its painted clear" Coop772, 2018
Its a double jolt reskin
how dose this look like a jolt to you?
AS Shuja lol you must be new
AS Shuja it's a coop772 meme
300HP electric Jolt
Flex tape clear: Hold my boat.
Should I buy a swordfish or dominator Frank? The Dominator is still by worker but more money? Is it more bang for my buck?
Ure almost at 1million subs
Good news bud,
He already is
@@darrenaqilawangsech8652 well that person said that 2 years ago so duh
Hi coop I want to ask blaster you think is the best the regulator or the tri strike
:Frank: **Uses Family Gut Clip And Doesn't Get a Copy Right Strike** :Also Frank: **;)**
7:58 , 12:11 "if you're a 3D printer", Yes I AM a 3D printer. LOL ! So funny !
Try get the Prometheus and do another tactical rough cut
Flywheel master race! @coop772 keep making tacticool videos!
6:57 that sounds like the roblox death sound
*OOF*
Hey Frank, what kind of motors are you running in the lipo stryfe?
If anyone is wondering why the attachment tooth isn’t there. It is because Nerf (Hasbro) have patented it.
biker1234567890 it’s actually for the ease of putting on the rails they sell
Good alternative from Worker for the same $30 that buys a current production Modulus Stryfe.
Of course, the real reason for the product is the assurance that Worker can continuously sell their large catalog of Stryfe dress up kits, which is a sizable chunk of their business, rather than be at the mercy of Hasbro who decides when, where, how much and how long they wish to produce and distribute the Stryfe.
It's a stryfe reskin!!!...
That's right, not a Jolt reskin
But the stryfe is a jolt reskin
It’s clearly a jolt reskin
See what I did there
So you get a full auto component for the swordfish with the vector kit.... but you shoot it like a semi auto and fingerbang in the firing demo?
It’s a jolt in disguise
Dude I’m joking around
I knew it was a clone stryfe ok!! He made a video about how a jolt are in guns like this. It was a parady video. But still learn to take a joke.
So...how do you take out a 6 round magazine with those attachments?
You cant😂
For once not a jolt reskin
Keep up the good work on 1million subscribers👍
Coop your one my favorite UA-cam or‘s you’re super funny
😀
You're*
he just isn't a fan of the letter A I guess
Well, stryfes are like 45-60, and there is this one seller on eBay selling a complete swordfish with a 12 banana mag for 45.
"Painted clear" didnt know they did that
Good to see that your shooting has improved over the last episode😀
Nice magic tricks
6:22 look at his mag I am mind blown of how fast that empties
4:04 lol
Can't you wire the full auto kit to have motor braking?
How can u paint something clear
Clear paint
Don’t question it
With the right kind of paint and a lot of faith
Easily
Devin S Wooosh
looks so cool,there is a black or other color version?i dont like clear stuff
Im early,lemme tell a joke
A clear deploy
Firstly, there is indeed a barrel attachment adapter that makes all of worker barrels compatible 'Worker Straight Cutting Type Interface Module'. Not surprised people don't know about it, it came out before the swordfish shell did and totally made no sense.... until now.
Secondly, I installed the full-auto and also had problems with the firing but you didn't explain exactly what the problem was. There are two different configurations to have a switch cut-off the firing "immediately" on trigger release, but that wasn't my problem: my dart pusher was not moving back quickly enough to depress my switch located back of the pusher before the auto-gear contacted it for the next cycle, and this caused my runaway firing. I'm wondering if this is what you're getting too. For the moment I tuned down the ROF via the ROF adjuster on the PCB using a micro screwdriver, which solved the the problem but now my ROF is only slightly higher than a stock RS, which is kinda disappointing.
Wow I always miss your videos
Does the transparent blue kit come complete with all rails? Been debating getting it for a Stryfe project.
Only liked cause he said they painted it clear
F10555 already made a new attachment lug which works with the stryfe and the swordfish
I was looking up this yesterday 😱
When you have the clear mag and the clear vector kit on it, it looks *CLEEEEAAAAAANNN* !
4:05 hmm "PAINTED CLEAR" yeah thats logic
I hope i can do that to my self paint myself clear people would be scared they can only see my fat and organs
im like😂😂😆😆
Their like🤤😫😨🤢
it's awesome cause you can see the BOOMco darts as you shoot them out of it!
It’s a jolt reskin
@@bendydevil4935 clearly you dont watch any videos, its a joke, grammar nazi
honestly worker is so cool. i’m glad there’s one place to get all kinds of stuff like this for Nerf.
Recon VS Retailiator VS Recon MKII. Now!
Retaliator. recon has a weaker perfomance and mk2 has mag compatibility issue
@@thrguywiththecoins9726 retaliator is goat
So getting this kit, looks amazballz!!🤘
"Painted Clear"
The Worker 132 motors are efest 14500 imr compatible, or which motors are you running in the imr equipped swordfish?
45 views and 125 likes?!?!?
I love it if you could hang different metal "targets" N play your intro or something lol. Great vid as usual. TkEZ»UK
Worker barret 50 cal review
hey coop is it possible to fit 180 sized motors in the sword fish kit with out dremeling it or is it to close slim
Hi
Ryan823x 772 hi
hi
build as in no welding or wiring? do they send the assemebled gun for a slightly higher price ? idk i just want a clear stryfe
Dat #allclear criss vector swordfish
Will you ever sell the micro rapid strikes Ever again or anything on your old website
Hi coop you are my favorite
7:24 I was just waiting for that to happen
Yeet
Yee
Yee
You need to add motor braking to the Pusher motor on the full auto kit by adding a wire from negative on the battery to normally closed on the rev switch
yay its painted clear!
Where do you get those magazine stands? I really want one to display my modified blasters.
Yo this Is litty
Just wondering, how fast can you reload different nerf blasters? And can you please make a video on fast reloads.
Team blue for life bruh
Cool but I’ll still prefer the stryfe since I don’t mod stuff... Coop you didn’t put the chronograph results why ? Is it because the performance is the same ?
Im sad thats its moar than a normal stryfe
coop i have a suggestion you should paint your kriss vector and then write sword vector on the middle of each side and make it 3-round burst
Keksregal
what motors does the clear blue model use?They are silent yet so efficient!
Nice video
Coop have you seen the stryfe TAR-21 kit from worker? Do a review on that one!