www.ebay.com/itm/Blak-Silicone-Rubber-Stopper-Plug-Blanking-End-Cap-Tube-Pipe-Insert-Bung-9-140mm-/333378453086?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0 The 51.3 mm ones
Hey man great video, i just pulled the the trigger on a '20 classic 114 in black. First mod is going to be those taillights for sure! Tabs sound awesome, I had a set on an 08 Vrod
Sweet, I'm going to copy a few of your mods. I'm glad you gave us the height of the windshield. Your bike has that souped up Harley sound. Beautiful sound.. Keep up the good work.
Nice looking bike ! I’ve got the 2021 heritage classic with all the chrome. I just add add add and spend spend spend! Love it . Best hobby ever. I bought the windshield from freedom shields to. I got the 17 inch with a light tint and it really works nice. I need to find them plumbing pieces you put on your bags. Anyway good to see a nice looking heritage out there. Great look.
I'm shopping for a 2018+ Heritage Classic with plans to make it my own. Your bike is the closest I've seen to my vision. Thanks for making the video and sharing your ride.
Thanks man. Not many people do much with the Heritages. I got a lot of ideas from a video I saw from Laidlaws Harley Davidson of a tech named Jamie’s bike. They have a video giving a tour of his mods if you look it up
Thanks for writing back! I found my bike and making the purchase tomorrow; 2020, vivid black with super low miles and a couple of mods. It has stock bars and I suspect that'll be the first thing I change. How do you like the HD fat chizeled bars? They look great. Would you buy them again? @@rexrob.88
Great looking bike and I like what you’ve done. I’ve got a 2020 Heritage 114 in the vivid black also and I have done a few mods but not as many as yours. You’ve given me some great ideas. Great video
So I've been trying to figure out what seat I should get for my Heritage, that tuck and roll was on my short list with the Solo saddle and backrest but now I've seen that one on the bike that's the one thx... as for mods I have most of the trim blacked out too and I've removed the front reflectors also...one thing I did was I sprayed the reflectors on the side of the bags with tail light blackening spray paint after a couple of coats they're as black as the bags... I'll keep watching and thx for the vids... going to order my seat now.
You’ve got the nicest looking Heritage on UA-cam brother! Just pulled the trigger on mine over July 4th cuz ‘Merica! Would you consider posting a list of the mods!
Beautiful bike. Cool ! Very cool !! Just came across your channel and I am happy to support you and other fellow motovloggers. I look forward to seeing (and hearing) more from you regarding this terrific bike. Keep up the great work and ride safe out there my friend ...
Looks really good. The plumbing plugs is a great idea and the little bag finishes the rear off well. I have added V&H pipes and did the stage one to improve the sound and let it breath a bit. After the 4th it’s going in for the stage ll. I added the crash bars , highway pegs and trunk rack/ sissy bar. Since it gets so hot in these Texas summers I am doing some of the work then. The dog bowls are going , and all the lights are going to be LEDs.
Dear @RexRobinson; love this video. I have a new 2021 Heritage in the Deadwood Green with Vivid Black. I'm starting to gloss black my whole bike out and I got some GREAT ideas from you. Thank you. I also love the rubber plug idea. I think I found the right ones on ebay but they say plastic...I want to make sure to get the rubber ones you have. I read the other posts...I see you had a local guy paint the fender trims. Nice touch! I am making a list of upgrades, but I think the Custom Dynamic smoke lights are next. One thing I would recommend is a black Harley Coil Cover (Kuryakyn also makes an all black one). Hoping to also make a video of my bike one day.
Your bike looks awesome. Where did you get your tank bib? Also, have you upgraded your headlight and passing lights? If so, what brand(s) did you go with?
Your bike looks great. I picked up a 2020 FLHCS 114 in vivid black in early March. It had a 2up Saddleman seat and a 2-to-1 S&S exhaust installed. Everything else was stock. I've added Custom Dynamics lighting and the lay-down plate holder. About to pull the trigger on the 21" Freedom Shield. I've been debating between the 19" and the 21" but after 115 miles today and really thinking about line of sight and body positioning, I'm settled on the 21". Next, I want to black-out the front and rear fender clips and the window trim like you did. Did you rattle-can those yourself? Any advice? There's a body and paint shop not far from me and I was thinking of taking the pieces to them for a quote. Curious about your experience with those pieces. Thanks for sharing this video. It's inspiring.
Man , looking good , your sneaking up on me now , the black guards , and trim are looking great , I like the conduit plugs , they are a nice touch on the bags . I am thinking on the road rider front led's for my Sportster . Where did you get the rubber plugs , I will get some for mine . Be safe , thanks .
@@ncf11 they’re the Tab slip-ons with the zombie baffles. They still use the stock heat shields. Can’t remember the name of the sissy bar, but I got it from HD’s website
Rex Robinson Where did you get your black Fender trim from I have a 22 heritage softball classic and I look into get rid of the Chrome and get black I can't find it anywhere
I definitelt wanna know about that windscreen. After watchimg the video, very nice bike!! I commented immediatley when i seen that windscreen lol. Did you paint it ?
What kind of saddle bags are those? Really like the look of them. I have an 05 heritage softail classic and it came with leather soft bags and they're cracked and worn leather
Beautiful bike and since you are eliminating a lot of the chrome did you ever consider removing the front chrome drum from the wheel to expose more of the spokes ?
Any tips on how to remove and reinstall the fender trim parts for paint would be greatly appreciated. I haven't seen fasteners like these before. Thank you sir.
@@rexrob.88 I will have to call custom dynamics see if tripple play will work with the sissy bar back rest brake light. All those together would light up the back very well.
@@rexrob.88 thank u sir for the reply. I believe I found the right ones so I ordered them they ended up being the 51.3. Again thanks so much for replying.
Can you tell me which one it is for the soft tail slim? A part number would be great! I’m trying to find that same one and not having any luck. Thanks!
Do you notice how bad the buffeting gets when you open your legs up.I have some buffeting when riding normal but when I open the legs to air out the jewels....the buffeting is unbearable
www.ebay.com/itm/Blak-Silicone-Rubber-Stopper-Plug-Blanking-End-Cap-Tube-Pipe-Insert-Bung-9-140mm-/333378453086?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0
The 51.3 mm ones
Where did you get your black Fender trim from
@@davidfrench9675 the Harley dealer then had it painted.
Ohh ok, thank you
That's a beautiful set up. Looks very sleek.
Thanks for video, I’ll be getting that windshield before my Colorado trip. Also nice touch painting the fender trim.
Hey man great video, i just pulled the the trigger on a '20 classic 114 in black. First mod is going to be those taillights for sure! Tabs sound awesome, I had a set on an 08 Vrod
This is 100% how I'd do one of these bikes! Really kickass man
Bike looks awesome dude. I just got a 2022 in black, I love what you've done with yours
Sweet, I'm going to copy a few of your mods. I'm glad you gave us the height of the windshield. Your bike has that souped up Harley sound. Beautiful sound.. Keep up the good work.
Nice looking bike ! I’ve got the 2021 heritage classic with all the chrome. I just add add add and spend spend spend! Love it . Best hobby ever. I bought the windshield from freedom shields to. I got the 17 inch with a light tint and it really works nice. I need to find them plumbing pieces you put on your bags. Anyway good to see a nice looking heritage out there. Great look.
I'm shopping for a 2018+ Heritage Classic with plans to make it my own. Your bike is the closest I've seen to my vision. Thanks for making the video and sharing your ride.
Thanks man. Not many people do much with the Heritages. I got a lot of ideas from a video I saw from Laidlaws Harley Davidson of a tech named Jamie’s bike. They have a video giving a tour of his mods if you look it up
Thanks for writing back! I found my bike and making the purchase tomorrow; 2020, vivid black with super low miles and a couple of mods. It has stock bars and I suspect that'll be the first thing I change. How do you like the HD fat chizeled bars? They look great. Would you buy them again? @@rexrob.88
Plumbing pieces that pop on saddle bags. Great touch. Any chance you could post link to what they are
I absolutely love the saddlman seat on that Heritage
Thank you! Just got a 2019 with the 114!
Great looking bike and I like what you’ve done. I’ve got a 2020 Heritage 114 in the vivid black also and I have done a few mods but not as many as yours. You’ve given me some great ideas. Great video
I’ve actually watched several of your videos. I love what you’ve done with yours as well!
Hi Rex, also thanks for the tail light information, I was able to find the web site and get a set for my Heritage 2021.
Nice looking ride sir. I've got the same year and model except in green. Your mods on yours gives me some ideas for mine.
Checking in 9 months post video, but this is exactly how I want my heritage if I get one! This bike is FIRE!
I’m making another one here shortly
So I've been trying to figure out what seat I should get for my Heritage, that tuck and roll was on my short list with the Solo saddle and backrest but now I've seen that one on the bike that's the one thx... as for mods I have most of the trim blacked out too and I've removed the front reflectors also...one thing I did was I sprayed the reflectors on the side of the bags with tail light blackening spray paint after a couple of coats they're as black as the bags... I'll keep watching and thx for the vids... going to order my seat now.
Your battery should be switched for a lithium your starter sounded like its straining for power. The 200 CCA will liven it up nicely.
You’ve got the nicest looking Heritage on UA-cam brother! Just pulled the trigger on mine over July 4th cuz ‘Merica! Would you consider posting a list of the mods!
If I had them. If you see something I’ll gladly tell you what it is
Beautiful bike. Cool ! Very cool !! Just came across your channel and I am happy to support you and other fellow motovloggers. I look forward to seeing (and hearing) more from you regarding this terrific bike. Keep up the great work and ride safe out there my friend ...
Awesome looking bike 🤙🏾
Wow! Absolutely beautiful bike man, I’ve got a 2021 107 in Bellerud teal, I’m doing the opposite though with chrome but the black looks so badass.
Looks really good. The plumbing plugs is a great idea and the little bag finishes the rear off well. I have added V&H pipes and did the stage one to improve the sound and let it breath a bit. After the 4th it’s going in for the stage ll. I added the crash bars , highway pegs and trunk rack/ sissy bar.
Since it gets so hot in these Texas summers I am doing some of the work then. The dog bowls are going , and all the lights are going to be LEDs.
Nice. Where can you get the plugs for saddlebags locks?
Dear @RexRobinson; love this video. I have a new 2021 Heritage in the Deadwood Green with Vivid Black. I'm starting to gloss black my whole bike out and I got some GREAT ideas from you. Thank you. I also love the rubber plug idea. I think I found the right ones on ebay but they say plastic...I want to make sure to get the rubber ones you have. I read the other posts...I see you had a local guy paint the fender trims. Nice touch! I am making a list of upgrades, but I think the Custom Dynamic smoke lights are next. One thing I would recommend is a black Harley Coil Cover (Kuryakyn also makes an all black one). Hoping to also make a video of my bike one day.
Do you mind telling me what engine bib you have? I like the simple look of it. Thanks!
Hey bud sorry I didn’t see this sooner. My bib is from Harley. It’s stock from a Softail slim.
Where did you get those caps?
where did you buy the lock caps on the saddle bags from? I like the look and the protection from rain.
Someone posted them on a Facebook group I’m in. They got them off of Ebay
@@rexrob.88 Thank you.
@Donaldduck did you find the covers? I can't find them
I can not find them
@@andrewroush5190 www.ebay.com/itm/Blak-Silicone-Rubber-Stopper-Plug-Blanking-End-Cap-Tube-Pipe-Insert-Bung-9-140mm-/333378453086?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0
Your bike looks awesome. Where did you get your tank bib? Also, have you upgraded your headlight and passing lights? If so, what brand(s) did you go with?
Cool elegant bike, well customized 👌🏼
Just watching video..... We have 2022 Heritage. What size plummers cap did you purchase for bag locks??
51.3 mm
The plumbing caps on the bags is genius! How can I order them?
looks great man, I have wanted a road king forever but I've gotten a bug for a heritage
Nice. I’ve actually been thinking about trading up to a Road King or Road Glaide
Your bike looks great. I picked up a 2020 FLHCS 114 in vivid black in early March. It had a 2up Saddleman seat and a 2-to-1 S&S exhaust installed. Everything else was stock. I've added Custom Dynamics lighting and the lay-down plate holder. About to pull the trigger on the 21" Freedom Shield. I've been debating between the 19" and the 21" but after 115 miles today and really thinking about line of sight and body positioning, I'm settled on the 21". Next, I want to black-out the front and rear fender clips and the window trim like you did. Did you rattle-can those yourself? Any advice? There's a body and paint shop not far from me and I was thinking of taking the pieces to them for a quote. Curious about your experience with those pieces. Thanks for sharing this video. It's inspiring.
Hello Rex, can provide a link to were you got the rubber plugs for the saddlebags and the size
Just started my modification journey, love the rubber plugs you have on the saddle bag locks. Can you please tell me where you got them. TY
I actually don’t have this bike anymore but I put the eBay link in the comments with the size you’d need.
Man , looking good , your sneaking up on me now , the black guards , and trim are looking great , I like the conduit plugs , they are a nice touch on the bags . I am thinking on the road rider front led's for my Sportster . Where did you get the rubber plugs , I will get some for mine . Be safe , thanks .
I got them off of EBay. Someone in a Facebook group had the link. If you want to meet up one day I’ll give you some
How dark on the windshield tint? Thinking of getting that one for mine. Bike looks great!
Looks awesome man! Did you paint the fender trim and windshield chrome yourself, or have it done? What did you use?
I had a local guy do it
What are those plumbing pieces called? Good idea! Also, how do you like those bars?
Nice. I would remove that front wheel chrome dish too. On the Freedom shield, is that a whole new 21” windshield?
@@ncf11 you have to use the stock hardware
What is the name of the plumbing pieces (plug) for the saddlebag lock area?
I’m waiting on a response for this as well lol
Love your bike. Are those Tab slip on 4” and are
You running the stock heat shields for them? Also, what sissy bar is that? Thanks
@@ncf11 they’re the Tab slip-ons with the zombie baffles. They still use the stock heat shields. Can’t remember the name of the sissy bar, but I got it from HD’s website
Did you paint your fender trim parts? If not, where did you purchase them? Thanks.
I painted them.
What kind of seat is the one you installed in your bike? The stock one give me pain in my tail bone. I bought a saddleman seat. I hope it works.
Great taste man.
Rex Robinson Where did you get your black Fender trim from I have a 22 heritage softball classic and I look into get rid of the Chrome and get black I can't find it anywhere
Where did you get the black trim for the fenders? I've seen someone take them off and paint them, but I'd rather just have black ones.
I actually took them off and painted them as well. I broke a few while taking them off and the Harley dealer got me some new ones
I definitelt wanna know about that windscreen. After watchimg the video, very nice bike!! I commented immediatley when i seen that windscreen lol. Did you paint it ?
I painted the windscreen hardware but the windscreen itself I ordered from Freedom Shields. The have a custom maker
What level of tint did you go with on your shield for the top half. It looks good.
Light smoke. I think if I went darker I couldn’t see through it
Very nice. I'm gonna copy cat on my Heritage. THANKS!
Glad you like it! Going to make another update soon. I’ve changed quite a few things
Great mods! Can I ask what bars you have on your bike?
Terrific bike!!!
Ty sir! New video coming soon
when you went with the 12in handlebars did you re do all your cables, or use just everything stock?
New cables
Hey very nice, I have a2022, Love the Black fender trim.
ive been looking high and low, where did you find yours ? Dave
Where did you get the black fender trims?
Do you still get wind buffeting with the new windshield?
Great looking Bike!! Is that a legal license plate?? That is awesome.
What kind of saddle bags are those? Really like the look of them. I have an 05 heritage softail classic and it came with leather soft bags and they're cracked and worn leather
Those are just the stock bags for the 2020
@@rexrob.88 ah wow. Those are beautiful
Beautiful bike and since you are eliminating a lot of the chrome did you ever consider removing the front chrome drum from the wheel to expose more of the spokes ?
Yeah I talked about it at the end. I’m either going to take it off or paint it black
@@rexrob.88 oh yea you did mention that. It's a beautiful wheel, I vote to remove it
Any tips on how to remove and reinstall the fender trim parts for paint would be greatly appreciated. I haven't seen fasteners like these before. Thank you sir.
They’re tough that’s for sure. Easier if you take the wheel off.
@@rexrob.88 Hmmmm..... I may try to carefully mask them off and paint in place.
Looks amazing. Got a 2022 all blacked out. How did you get the tank badges off? I want to do that too.
Heat gun, leather gloves, fishing line, and goo gone.
@@rexrob.88 Thank you.
What seat is that? Looks great. Is it comfortable on longer rides?
Looks awesome,
Tell me more about the windshield. I am always looking to improve mine but seems like you fix one problem and create another
Which problem would it create?
@@rexrob.88 Sometimes creates wind from lower in the bike. So you are saying this has better all around protection than stock
@@tonybrum6361 yeah. It takes the wind off of my head.
@@rexrob.88Hello, what is the brand name of that windshield? Thanks..
@@donaldduck2405 freedom shields
nice bike
Where did get the saddle back gaurds. I have a 2020 heritage.
Harley brand. Right off the website
Look up boss bags tell me what you think I have a set on my 2018 heritage 114
I’ve seen those. I like the look. If I was going to go aftermarket I’d go with either those or Leather pros
I would remove the fake hub , think it look best with the theme you have with your bike.
Who made your sissy bar and how tall is it? Thanks in advance.
It’s from Harley. Can’t quite remember how tall it is
Did you get the black front and rear fender trim from Harley?
No I painted the stock fender trim
@@rexrob.88 Great job.
Please list what the parts are and we’re you got them.
Where did you get the plugs for your saddlebags. Thanjs
Did he really say those are 12 in bars
They are. What do you mean?
Do you recall where you got the black fender trim?
I said in the video
How did you paint your fender trim black.
How did you make the trims on the fender black, greetings Rob
Took them off and took them to a local paint shop. I actually broke one taking it off so I had to get it replaced at my local Harley dealership.
Hey man what did you do to get all the lights to act as running lights?
Custom Dynamics Triple Play
@@rexrob.88 I will have to call custom dynamics see if tripple play will work with the sissy bar back rest brake light. All those together would light up the back very well.
@@tylerthrash3155 good luck bud. I’d love to see that
What sissy bar did you purchase for your bike?
It came from the Harley website
What size are the plugs on the bags?
51.3 mm
What is the size of he Rubber Stopper Plug? when I tried the link below you supplied it asked to select a size? I think it might by an 43MM?
51.3
@@rexrob.88 thank u sir for the reply. I believe I found the right ones so I ordered them they ended up being the 51.3. Again thanks so much for replying.
@@darrylruiz1376 sorry it took so long. I must not have seen the notification
I’d do some gloss back hard bags
That’s the stock exhaust you just changed out the baffles?
Yes
What you call that slip on pipes it sounds great man
Tab Performance Zombie Baffles
Hey Rex did you tune your bike when you put those on? Sounds so good
what are the handlebars?
Harley Davidson 12” fat chizled
Hi Rex, who makes the tank bib on your bike? Thanks
Harley does. It’s from a Softail Slim
Can you tell me which one it is for the soft tail slim? A part number would be great! I’m trying to find that same one and not having any luck. Thanks!
The light bar needs to be black too
Do you notice how bad the buffeting gets when you open your legs up.I have some buffeting when riding normal but when I open the legs to air out the jewels....the buffeting is unbearable
I did. The taller windshield helps with that a lot. Also I have some soft lowers from Desert Dawgs that fit on the mustache bars
Nice
To much black don't look good enough sorry , but bike is nice !! To much black need chrome footboards . So it will blame . 😮 sounds nice!
What sissy bar is that?
And take your bog bow off front wheel.it will look better .😮
Not enough Chrome
To much black it doesn't look good . But nice bike .
Those bars are hideous
Like your mother
@@rexrob.88 Amen!
Where did you get those caps?
Where did you get saddlebag guards?
Harley