Carbon Fibre Split Mould Lay Up. Car Wing Mirror Cover [PREPREG] [OUT OF AUTOCLAVE]

Carbon Fibre Split Mould Lay Up. Car Wing Mirror Cover [PREPREG] [OUT OF AUTOCLAVE]
Here I layup the split mould I previously made using Xpreg prepreg carbon fibre. The results are great, leaving minimal sanding back on the split line ready for clear coat.
Products i used in this video in this step by step tutorial are -
Release Agent
www.easycomposites.co.uk/easy...
Prepreg Carbon
www.easycomposites.co.uk/xc11...
Release Film
www.easycomposites.co.uk/r210...
Breather Cloth
www.easycomposites.co.uk/r210...
Vacuum bag
www.easycomposites.co.uk/vb16...
Bagging Tape
www.easycomposites.co.uk/vacu...
Clear coat used is Lechler Macrofan hs 2000
Want to see how the mould was made? - • How to make Carbon Fib...
#prepreg #diy #epoxy
[e-mail]

[@CarbonWorkshops]

Want to see how to mould was made. Check out this video 😄
ua-cam.com/video/5cMpsN_nuAM/v-deo.html

[@user-kd1ft4hk5y]

Hello👋 May I ask you, the gel coat uses epoxy, and the laminate uses vinyl. Is there any delamination?

[@gkelly]

Amazing surface on that finished part. Awesome work!

[@horschdesign9379]

Beautiful work. Next step is bonding those clips to mount to the car, the hardest part.

[@mrsimo7144]

Brilliant work. Be awesome to see the part fitted. Thanks

[@ArslanAhmad1]

Amazing work 👍🏼👍🏼

[@Holley469]

Good work 🎉

[@jeanfrancoispoivre4438]

Super la pièce 😉

[@Geminixx73]

c'est magnifique

[@ExadousPT]

everytime i watch one of you videos it makes me want to try it too but i know that you make it seem way to easy. 💪

[@CarbonWorkshops]

Lots of practice and patience you'll get it!

[@huizdeeze1075]

where did you get adjustable air coupler

[@smogman2084]

Would you say that the starter sets are worthwhile or are you better priced if you look for the things together?

[@Tadka_short]

Great work👍 can you please make my car ORVM cover

[@hellbilly_fpv6692]

Beautiful work! Do you sand the part before paint or do any buffing?

[@CarbonWorkshops]

Yes 240 grit before clear coat

[@kinanalhawat6753]

How are you going to put the pins to install on?

[@raihan8330]

How do i buy the carbon fibre?

[@teryaisya_tsubic]

How to attach it to the car?

[@iiEcho1]

what did you do for clips for fitment as I've always wanted to try wing mirrors but don't know how to get the right clips for fitting to the car

[@CarbonWorkshops]

These will be bonded into position

[@barnbuiltbeaters]

Why is a split mold utilized here? Couldn't this have been done with non-split mold? Thanks!

[@CarbonWorkshops]

Without the split the carbon part would of been mechanically locked into the mould with no way of releasing.

[@barnbuiltbeaters]

@@CarbonWorkshops The piece looks like it would have popped out without one. I must not be seeing something you are then! that is what I figured, thanks for the reply!

[@rahulln8876]

Bro can u do custom product for me

[@amatorotodetayamateurdetailing]

We look forward to your best wishes for the earthquake in Turkey. Please don't forget us.