Delonghi manifica 4200's infuser is stuck high up

Поділитися
Вставка
  • Опубліковано 15 вер 2024
  • Hi, my delonghi manifica 4200's infuser is stuck high up to the right and is completely stuck, tried moving motor etc after reading fixes on here but it's not moving at all. Any advice please?

КОМЕНТАРІ • 15

  • @fredgropp2748
    @fredgropp2748 2 роки тому +1

    ThankYou so much for this video I watched so many and they did not help me with the infuser stuck in the high position for 2 hrs I tried to put the in fuser back in after I took it out before the machine fully stopped new to the expresso world I learned a valuable lesson wait for the machine to fully shut off before removing the infuser without your video i still would have been stuck THANKS AGAIN you are doing a wonderful job.

  • @nef003
    @nef003 3 роки тому

    Thank you!! This was the only thing that helped me reset the position of my Delonghi Magnifica Xs from the stick on the top position. I first had to disassemble the machine and remove the transmission. Take out the infuser; clean it and everything else. Lube the parts and then put all back together. Now your step was required and couldn’t find anyplace else that had this. Thank you!!

  • @Gniprikas
    @Gniprikas 5 років тому +2

    I had similar problem. I tried switching off machine with power switch on a back several times and it helped.

  • @Kyutu07
    @Kyutu07 3 роки тому

    Had similar problem a while back on this machine, for me it ended up being the brass block that travels up and down the threaded rod at the back needed replacing as the threads had stripped. Easy enough to tear down this unit and there are videos that show you how.

    • @mgray999
      @mgray999 3 роки тому

      My mother spent 400 on this same unit on ebay. Same issue is happening. I opened it up and got it out only to have it do the same thing as before.

  • @enrikejs
    @enrikejs 3 роки тому

    Bro you just saved my life thanks

  • @mako9738
    @mako9738 3 місяці тому

    Yay!!! It works. Thanks bro!

  • @pfrie1578
    @pfrie1578 4 роки тому +1

    There is a push button sensor that stops the motor when the infuser is in "brewing" position.
    Looks like this is where the problem is.

  • @klaasvanmanen8214
    @klaasvanmanen8214 6 місяців тому

    What were you thinking? Let's run this machine with the bottom tray removed and see if it still works? Removing the bottom tray and trying to use the machine will give an error message as there is a sensor checking for the presence of the tray. Of course you ended up with an infuser in a strange place, having ignored the alarm lights. RTFM.

  • @al14126
    @al14126 2 роки тому

    Hi. How have you solved this problem? Thank you very much. I'm completely stuck with this machine.

  • @Hexagonaal
    @Hexagonaal 4 роки тому +1

    Same problem here. Did you find a fix for it?

  • @mikiteki2569
    @mikiteki2569 Рік тому

    Board problem. Hard reset dont work ( rinsing+eco and power on ON). Insert power board and OK.
    Memory is problem.....

  • @janespenser1402
    @janespenser1402 4 роки тому

    Anyone manage to fix this problem? I'm trying to fix a machine a little older than in the video... Still Magnifica but has ground coffee scoop instead of ECO button on right..

  • @Дмитрий-э2я1ы
    @Дмитрий-э2я1ы 3 роки тому

    Красава!

  • @kronosss2004
    @kronosss2004 4 роки тому

    same issue, please post if u guys find any solutions