Mi estimado buenas tarde tengo una torre de iluminación del año 2013 tiene motor kubota 3 cilindros el problema que tengo es que bota refrigerante por el escape , por favor su ayuda que podría hacer con el motor
Hello. Can you show how disassemble the part which you have in right hand at 10:23? I have to change o-ring or something because oil is here. I have d950
i have a d850 its running away after a difficult start. and won't shut off with the stop leaver. i had to put my hand on the air inlet to stop it.do you have any suggestions? thanks in advance 👍
I have a Kubota b4200 been setting for a couple years.pump is fresh rebuilt.and all the fuel system is cleaned.but when I start it it runs wide open.like full throttle.i have to turn fuel off to kill it...what could my problem be? Vacuum leak???
Re built again your injection pump,the plunger is not properly installed.kindly arrange the position of your plunger.thank you for watching.please watch from my video how to assemble injection pump.you can click my channel profile picture and click video and scroll up to find my videos.thank you
Paps naga halo talaga grudo ko sa engine oil. Bago na plunger ko. Naka electric feed pump na ako. Nka blind na feed pump di na ginagamit. Nag halo parin grudo ko sa oil. Ano kaya problema paps. Salamat may sira kaya injector ko paps ? Ano pa kaya ibang dahilan
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
it always sets full throttle...I thank you for your videos they are great.!!!
Thanks for watching.
Galing idol. God morning
Mi estimado buenas tarde tengo una torre de iluminación del año 2013 tiene motor kubota 3 cilindros el problema que tengo es que bota refrigerante por el escape , por favor su ayuda que podría hacer con el motor
это вы зажигание регулируете?
Kādu motoreļļu ieliet kubota z402 motorā 15w40, vai 10w40? Paldies!
Hello. Can you show how disassemble the part which you have in right hand at 10:23? I have to change o-ring or something because oil is here.
I have d950
Which one,the front cover or the plunger holder?
@@tractorsmarinemechanic which get higher rpm (speed control) I think is the name
Throttle?
@@tractorsmarinemechanic do you have video how change the o-ring?
ua-cam.com/video/LLBwEboMv1A/v-deo.html please watch this
Hello, is there a kubota li 215 Fuel adjustment screw on the fuel pump? I would like to increase the power a bit
None.
@@tractorsmarinemechanic thank you for answer
i have a d850 its running away after a difficult start. and won't shut off with the stop leaver.
i had to put my hand on the air inlet to stop it.do you have any suggestions? thanks in advance 👍
Plunger is stuck up.please watch my video.i think that is same with this...ua-cam.com/video/X3OeRkhFOBw/v-deo.html
Thanks for your reply I will take the front cover off and try to move it by hand . Where are you located. Greetings from the Netherlands
Philippines
Working bast 🌹🌹🌹🇮🇳🛠️🛠️🛠️
Super meistars!
I have a Kubota b4200 been setting for a couple years.pump is fresh rebuilt.and all the fuel system is cleaned.but when I start it it runs wide open.like full throttle.i have to turn fuel off to kill it...what could my problem be? Vacuum leak???
Re built again your injection pump,the plunger is not properly installed.kindly arrange the position of your plunger.thank you for watching.please watch from my video how to assemble injection pump.you can click my channel profile picture and click video and scroll up to find my videos.thank you
Hello. I have engine kubota d950. How many oil engine I have to use ?
Engine oil? 4 litter or more,use dip stick
@@tractorsmarinemechanic yes. Engine oil
On the cover I see label with “d950” and on the engine is “K5-B” what’s mean ?
how to increase the fuel rate for this fuel pump?
I'm sorry
Can I do the same with a D1803?
Yes.its the same
Boss,ano Kaya sira ng iseki engine pag umiinit Yung crankcase ?
Ang usok ng makina Hindi ba nagbabago?
@@tractorsmarinemechanic Hindi Naman sya mausok
boss Tanong kolang Marami pabang piston ring parasa kobota D600 29853 model
Meron po
Can 1302 be loaded with 1462?
Yes
I have problems connecting the throttle pin of the pump to the inside parts
Thank you for watching.That kind of injection pump It requires a lot of patience to re assemble.
proper adjustment of the engine governor
Bos Anu Ang dipirensya Ng harvester nmin n kubuta DC 70 plus payado po bos
Gusto mo sir check ko?
Nagpalit na kami Ng Bago sir KC nag bleed na Ako palyado parn bong mainit na Anu Kya Ang sira Ng injection pamp?
Ano po Ang pinalitan mo sir?
Gdpm boss, ano kadalasan sira nyan pag nag low power?
Plunger sir
Boss saan pwede i adjust para tumipid sa deisel kubuta l5018 sir
Good morning sir..
Magkano po ba ganyang makina?
Nasa 100k po iyan
Paps naga halo talaga grudo ko sa engine oil. Bago na plunger ko. Naka electric feed pump na ako. Nka blind na feed pump di na ginagamit. Nag halo parin grudo ko sa oil. Ano kaya problema paps. Salamat may sira kaya injector ko paps ? Ano pa kaya ibang dahilan
Model ng makina mo?
D950 engine paps
Saan Lugar kayo sir?baka sira na Ang pumpo sir kc Wala nmang iBang dadaan.ang diesel kundi dyn sa pump
Mindanao kasi ako sir. South cotabato. Bago naman po plunger. Cguro sa housing ng pump worn out na anoh paps?
Baka sira n Ang pump mo sir or Ang yong pagkakabit ng plunger.
Hello mi dymi z odmy co robić silnik stał rok
Kindly repeat your question.
pwd patolong boss
Meron po ba kayong contact number? Kailangan ko kasi ng tulog sa B6000 ko. Please po
Ano po ba ang sira ng B6000 nyo?