iPhone 11 Pro Max Disassembly and Rear Case Replacement

Поділитися
Вставка
  • Опубліковано 20 січ 2020
  • Step-by-step instructions on how to completely disassemble the iphone 11 pro max to replace the back housing, and also show how to assemble the phone back.
    Buy back housing for iphone 11 pro max and screwdrivers for disassembly at AMAZON:
    Screwdrivers set: amzn.to/2Dp1Rcm
    Opening tool: amzn.to/2Zcwmdo
    Adhesive Waterproof tape: amzn.to/2urFkKg
    Magnetic Mat: amzn.to/2Rw4G2w
    Back housing for iphone 11 pro max: amzn.to/2TUOgmf
    ALIEXPRESS:
    iPhone 11 Pro Max Rear Case: ali.pub/537pe3
    Rear Case with cables: ali.pub/53a083
    Adhesive waterproof tape: ali.pub/30oksv
    Screwdrivers: ali.pub/305qf8
    Answers for most popular questions: goo.gl/LRJghi
    More photo and video guides on our website: www.how-fixit.com/
    FOLLOW ME:
    Instagram: / howfixit
    Facebook: / howfixit
    Twitter: / howfixit
    *** DISCLAIMER ***
    This video intended for general information only. We will not accept any liability for damage or injury caused while following this guide. Any reliance you place on such information is therefore strictly at your own risk. This video description and commentaries contains affiliate links, which means that if you click on one of the product links, I could receive a small commission.
    *** AFFILIATE PROGRAM ***
    We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
    #howfixit #diy #repair #ifix #howtofix #iphonerepair
  • Наука та технологія

КОМЕНТАРІ • 35

  • @timothywise4913
    @timothywise4913 8 місяців тому

    This video worked out very well I will always use you

  • @familymoser7035
    @familymoser7035 Рік тому

    That was awesome...... Best video to fix things. You are in my library. I might need more from you. Thank thank thank YOU

  • @abdulwahid8579
    @abdulwahid8579 Рік тому

    Good job with all the best information and knowledge 💯

  • @s2Productionz
    @s2Productionz Рік тому

    So clean and concise ty

  • @baldiepie9635
    @baldiepie9635 Рік тому

    Thank you. See $ for thanks and keep them coming in

  • @sdyt263
    @sdyt263 Рік тому

    @How-toFixit just found your video , I've got an issue with an iPhone 11 pro max which when I put the logic board into a replacement housing the phone restarts every 3 minutes and on the panic attack registry says that mic2 sensor is missing . Where is located mic2 on iPhone 11 pro max ? I'd appreciate it if you could answer .
    PS; when I put back the logic to the original housing the phone works just fine , I just want to change the housing because the original one is smashed quite bad . Thanks in advance!

  • @m.m.m.c.a.k.e
    @m.m.m.c.a.k.e 2 роки тому +2

    It’s funny how you skipped over the bottom speaker installation LOL that’s the only part I needed

  • @CHENAPPADY
    @CHENAPPADY Рік тому

    Thanks Howfixit

  • @redwarrior260
    @redwarrior260 3 роки тому

    Excellent video, but I just put a like in just for the coffee break.

  • @monjurulalam3946
    @monjurulalam3946 Рік тому

    Thanks bhai

  • @sergiojetro4522
    @sergiojetro4522 3 роки тому

    значит чисто теоретически этот конкоетно айфон можно заряжать с 55 вт зарядкой, а не той что идет в комплекте 18-20 вт ?

  • @fahadiqbal8935
    @fahadiqbal8935 2 роки тому

    Sir My phone iphon 11pro max Housing chang. but Restarting Problem

  • @KamiCrazy
    @KamiCrazy 3 роки тому

    The links to back housing on amazon or aliexpress don't come with cables and charging module. Where to find this part to simplify reassembly?

    • @howfixit
      @howfixit  3 роки тому

      I added a link to back housing with cables

    • @KamiCrazy
      @KamiCrazy 3 роки тому

      Thank you!
      One more question. Replacement housing has no wireless charging?

    • @jcmaliant1
      @jcmaliant1 3 роки тому

      @@KamiCrazy i bouth one and did not come with it (mad) not fair i got the same link smh

    • @jcmaliant1
      @jcmaliant1 3 роки тому

      @@howfixit need the new link for the housing with bottons please

  • @virajsingh5141
    @virajsingh5141 2 роки тому

    Hello sir I need iphone wireless charging coil... I m frm india

  • @hanifmahammad1656
    @hanifmahammad1656 Рік тому +1

    Sir aapka shop ka address bhejo

  • @lucylucy5337
    @lucylucy5337 3 роки тому +2

    hello everyone. my iphone is gold and i decided to change it to midnight green. let me know is it safe to use or are there disadvantages? appreciate y’all

    • @tesseract5569
      @tesseract5569 2 роки тому +1

      That will cause the universe to implode

    • @nimanixo
      @nimanixo Рік тому +1

      @@tesseract5569 true that happened to me

    • @void_15
      @void_15 Рік тому

      @@tesseract5569 i know! it’s a small price to pay for a different color 🙁

    • @Bearcat745
      @Bearcat745 11 місяців тому

      @@tesseract5569😮😊

  • @shaun7126
    @shaun7126 3 роки тому +2

    The speaker just reappear

  • @luisangelglez6432
    @luisangelglez6432 11 місяців тому

    Lo

  • @ntzntzzz
    @ntzntzzz 3 роки тому

    👍🏻👍🏻👍🏻

  • @jsonny9772
    @jsonny9772 4 роки тому

    How will the Water resistant work

    • @bigjoe6366
      @bigjoe6366 4 роки тому +1

      It won’t

    • @aaron10551
      @aaron10551 4 роки тому

      You would have to get a new seal

    • @kinggodzilla7273
      @kinggodzilla7273 3 роки тому

      @@aaron10551 even then you cant trust it

    • @Aikaramba12
      @Aikaramba12 3 роки тому

      @@kinggodzilla7273 in theory it will be 99% as good as the original phone

    • @kinggodzilla7273
      @kinggodzilla7273 3 роки тому +1

      @@Aikaramba12 id doubt it. apple had a machine that does it under immense pressure and heat to make sure it is ready to sell. yours might make it water resistant to like a light rain or even a quick dip but its not waterproof anymore. you can get waterproof cases though. ive fixed 3 11 pro maxes and ill be honest i havnt installed the seal on mine yet