We made up the hill again, doing some more testing, one hole was 2.5m down and working about 4ft of gravel, and the other side was much deeper of gravel, to deep for the 4".....
A normal keene box won't be able to keep up that's why we modified the box.. If ya look at the other videos of the 6", you will see what we have done..
Good afternoon friend, I have been researching this dredge system for some time, but nobody shares the exact measurements for manufacturing! measures like necessary motor, type of pump and measures, injector nozzle measurements ... I would be grateful if you could share the measurements of this project! big hug and success ...
The pans arnt off the tailings, the box is a modified keene box.. And yes an 8 would be the go in that area, but most of the claim isnt suitable for a 8".. That spot on the 4" was 1g an hour.. But we were just testing before we bring in the larger dredge..
Very Good👏👏👏
Very nice underwater shots. GG greetings Dani
You’re pretty good with that pan bro
Cheers.. should be have done a few now... Haha..
Never seen one so clean. Great methodology. 👍
Man, you need a big 8 inch rig for that bottom. Gotta day though. That 4 inch rig is throwing some serious rock.
A normal keene box won't be able to keep up that's why we modified the box.. If ya look at the other videos of the 6", you will see what we have done..
And is it stock riffle configuration or is it modified with different mats?
hi.. its a modified box.. hog mats at the top, riffles in the centre and expanded mesh on the back
gaday guys great vid,can you buy the 4 inch dredge set up in NZ if so how much are thay mate?cheers
trademe is a good place to start.. or go online and make your own one. but you will need a claim to put it on..
is that a 3 stage box you are using or the single stage box ?
it was a 3 stage box, now its a single box, 2 pans to clean in up.
Good afternoon friend, I have been researching this dredge system for some time, but nobody shares the exact measurements for manufacturing! measures like necessary motor, type of pump and measures, injector nozzle measurements ... I would be grateful if you could share the measurements of this project! big hug and success ...
That’s too much gold to be losing from one pan of tailings.
The pans arnt off the tailings, the box is a modified keene box.. And yes an 8 would be the go in that area, but most of the claim isnt suitable for a 8".. That spot on the 4" was 1g an hour.. But we were just testing before we bring in the larger dredge..
1 full gm an hour is pretty darn good return And my apologies for assuming those pans were from tailings.
@@billchiles9089 its good for a 4" and the area we were in.. We were only taking the top 1ft off the top, to deep to even try to hit the bottom..
Мало очень😮