Thank you Jesse. I learn a lot from your material. I have an 8 plus that only shows the low battery image when charging. As soon as the phone boots up there is no image. I can hear the phone and it charges normal. Can you point me in the correct direction please?
Can you make more walk through videos like this. I believe you’re viewers would increase much faster cause this is such a fast way to learn. Let me know what you think. Oh, also could you please explain to us how you have your power-z tool set up to see the Bitcoin chart 😂😉. Thanks
Thank you for the feedback! I actually have a ton of videos on my channel with detailed walkthroughs. The Power Z is easy to setup. Find the chargerlab power Z website and you can download software there Plug in left side to power Right side to the device And top side goes to the PC for data communication
Same problem here with the mosfets, but sometimes the battery does work normally (maybe the mosfet is pressed down?), should I just blow it with hot air so it reflows? I’m scared to remove the black sticker around the connectors because maybe it will take the mosfet off too (it’s probably loose)
What kind of mosfet we can jumper and can't? I have make am jumper FL before. but mosfet i don't really understand. what about if they have 4pin,6pins?
Thank you Jesse. I learn a lot from your material. I have an 8 plus that only shows the low battery image when charging. As soon as the phone boots up there is no image. I can hear the phone and it charges normal. Can you point me in the correct direction please?
Can you make more walk through videos like this. I believe you’re viewers would increase much faster cause this is such a fast way to learn. Let me know what you think. Oh, also could you please explain to us how you have your power-z tool set up to see the Bitcoin chart 😂😉. Thanks
Thank you for the feedback! I actually have a ton of videos on my channel with detailed walkthroughs.
The Power Z is easy to setup.
Find the chargerlab power Z website and you can download software there
Plug in left side to power
Right side to the device
And top side goes to the PC for data communication
Same problem here with the mosfets, but sometimes the battery does work normally (maybe the mosfet is pressed down?), should I just blow it with hot air so it reflows? I’m scared to remove the black sticker around the connectors because maybe it will take the mosfet off too (it’s probably loose)
Where can i find this Teflon that you use in your Table ?
Which tape are you referring to? Can you tell me at what timestamp I show it in my video?
What kind of mosfet we can jumper and can't?
I have make am jumper FL before. but mosfet i don't really understand. what about if they have 4pin,6pins?
Keep up the good work Jesse
Thank you bro 🥰
Great job 👏 thank you so much for uploading the video.
Thanks for your support! 🙏
Great video!!!!
Thanks!!
You're supper bro 🤗❣❣
Thank you so much 😀
No Results Found
In regards to what?