To me, Bossmans last line says it all! Yes wearing PPE is very important, but tell me I'm not the only one who has gotten chewed out for something similar and yet the bossman is at fault for the same thing he is yelling at you for!! LEAD BY EXAMPLE YA'LL!! 😊
I was just explaining safety squints to a safety man at work today. What a coincidence! I'm really surprised considering his level of education he had never heard of them. What are they even teaching in school today?!
As a welder, I use a face shield and safety glasses when grinding. I've had a grinding rock come apart on me and destroyed the shield. Imagine if I only had on glasses
Saftey Squints. Way more dangerious. If you had any clue how many people I have personally driven to the hospital with a dang peice of metal in thier eye you wouldnt even ask. Just me, one person is enough to throw on a pair of glasses, and just stop and clean em if they fog up. Ricky needs to get some glasses that fit, and not goggles though.
@@AnonymousAnarchist2 let me break this joke down for you. First its critical you inderstand what is a joke and that this is indeed a joke. Once you have figured out what a joke is proceed to 2. 2. The meat of the joke is ricky with foggy glasses might cut someone else. R8cky with saftey squints might maybe just possibly injure himself. But probably wont cause its rickt the boss.
I've seen angle grinding and cutting disks explode... I've seen 1 bench grinding wheel explode. Buddy had a metal cutting disk imbed into his arm. I drove him to the hospital. He didn't bleed too much, maybe because it was hot when it went in? 🤔 I always wear a face shield and safety glasses when working with anything bigger than a Dremel. Position yourself out of the debris field if you can. Especially with bench grinders. Don't stand directly in front of it.
I use a full face shield/ safety glasses, had a couple of cut wheels explode and bolts fall directly into my face. Not to mention several other instances using a high pressure washer. USE YOUR PPE
To any electricians out there. I’ve had a piece of metal fling into my eye, while cutting a piece of conduit with my bandsaw. Shit is random and it will get you at some point
I remember when i was 18 or so, I was grinding some piece of metal, and a shaving landed at the very edge of my eyelid almost touching my eyeball. Ever since then, I always wore safety glasses
I just watched a Saftey guy today get fired for poking a worker in the eyes for not wearing Saftey glasses. Lmao. Then ole boy pressed charges. Had the police an everything up in HR. This little clip got me rolling 😂😂
I mean...I agree with Ricky. Always fogging up or getting sweat splashes on em, even the damn anti fog ones don't do the anti fog part very well so they suck too.
how can they be safe if they fog up and obstruct your vision? Literally the only injury I've ever seen "stopped" by safety glasses, was caused by the safety glasses fogging up. Caused a kid in welding class to miss the piece of hot metal he was hammering and hit the Anvil full force, which rebounded the hammer immediately into his eye. Safety glasses stopped him from losing the eye, sure, but they also caused him to get smacked in the face with a hammer.
I've definitely always been against the safety glasses especially when it's hot because I always drove a forklift and they always fog up so makes it hard to see so always just resting them on top of my head 😂
Yea definitely always wear safety glasses I've seen alot of bad shit happen to people over the years myself included im very lucky though I can still see just fine but others werent so lucky also another tip if you are using a cutting torch always wear some super thick leather wielding gloves I've watched guys completely fry their hand in just a second because they didn't have gloves on also not something you want to happen to you
I shit you not, watched this yesterday morning, laughed, then about 5 hours later 'quickly' needed to clean up a weld with a flap disc on the grinder, so did not walk the 2 meters to go and get my safety glasses....... I have a session with a eye doctor in an hour and a half to get my eye looked at. DOH
@@Torana-gz5ls Boss: that's why there is a safety strap on goggles Rickie Rickie: mmmmmk. When the safety strap or goggles prevents blades and bullets, I'm in. But till then. . . . I'm out
When you don’t wear your PPE, you’re more cautious when you work. When you always wear your glasses, you become complacent, and more likely to get something in your eye
I’ve got a good friend who isn’t very good at wearing his glasses…I think he’s had to go to the optometrist like 6 times to get stuff pulled out of his eyes & steroids…think the last time he was in there the optometrist actually offered to buy him a nice pair of like Oakley safety glasses and he turned him down 😂 Admittedly, I rarely wear my safety glasses, unless I’m welding or chipping slag, usually if I’m grinding I just make sure my face isn’t in the line of fire…it’s worked pretty good for me, I’ve only gotten metal in my eye 1 time and I don’t believe it was from grinding, and it washed out (did really suck until it washed out though, I probably wear them more often after that.)
Safety people at my place have been eating crayons. I plan to ask them what their favorite flavor is at the townhall meeting this month. Can't sweep the warehouse even if it's completely empty because something might spawn into existence and fall on you. Where I work we are being led by the real life incarnation of Homer Simpsons or Ralph Wiggum. They are all so S.M.R.T.
As opposed to what tho? You think you can do a better job as a Safety Man? Most job sites won't let you clean up after a certain time, especially alone in an empty warehouse or something. Seems to me, you just hate being safe.
@@Viper42104 Who said anything about being alone. I'm saying even if we ship every single bale we have in our warehouse and it's as empty as a basketball court we can't then take the opertunity to sweep up because a bale might spawn into existence and fall on us.
Well, I have astigmatism. So I HAVE to wear safety glasses, since they have prescription lenses. It's pretty convenient, actually; safety doesn't even acknowledge me half the time.
I normally wouldn’t argue with Ricky. But yeah this is even a stretch for me. Wear your glasses. A lot of the other safety rules are made to cover the lowest common denominator type folks.
I had my mouth open age 23 I'm 48 now using acetylene oxygen torch with my mouth open and f up and sprayed directly into my mouth. Never once again doing anything remotely involving sparks is my mouth open. Lesson learned
Had to read the title twice the first time my stupid brain read Safety squirrels.. would have been just as funny but not quite as aggravating. i mean its way simpler to bribe a squirrel than a person.
Yes safety glasses Gotta chemical burn here 1 tiny drop in the left eye Burned like shit nearly froze my eyeball trying to flush it out with a hose Safety squint don’t stop liquids
To me, Bossmans last line says it all! Yes wearing PPE is very important, but tell me I'm not the only one who has gotten chewed out for something similar and yet the bossman is at fault for the same thing he is yelling at you for!!
LEAD BY EXAMPLE YA'LL!! 😊
Apparently your Bossman lives by the adage, "Do as I say, not as I do". I've known many bosses like that.
I was just explaining safety squints to a safety man at work today. What a coincidence! I'm really surprised considering his level of education he had never heard of them. What are they even teaching in school today?!
I have a 1900s blacksmiths manual that actually recommends squinting. 😂
Please tell me the title and author?
@@SamDockery-zl8gq I’ll try to find it, I’m not sure where it is right now.
People were built differently back then.
@@jgarner420no. they where not.
They just got injured more back then.
"1900s"?? That was like 25 years ago!!!
I'm hurt now.
As a welder, I use a face shield and safety glasses when grinding. I've had a grinding rock come apart on me and destroyed the shield. Imagine if I only had on glasses
That's what your off hand is for. 1/2" spacing between the digits for grinding, 1/4" for welding.
@@daviddrury6451 The "off hand" should be on the side handle to assist with control of the grinder.
Bro, if you're grinding with one hand, you shouldn't be doing the grinding. AT ALL.@@daviddrury6451
@@jddonaldson931 Nothing but a safety man in disguise......i've never heard a welder speak so highly of safety.
Something tells me Ricky uses the squint technique when he brings a lady home from the strip club too 🤣
No its the drunk technique
What's more dangerous, Ricky with a grinder and fogged up glasses he can't see through or Ricky with a grinder while squinting?
Saftey Squints. Way more dangerious. If you had any clue how many people I have personally driven to the hospital with a dang peice of metal in thier eye you wouldnt even ask. Just me, one person is enough to throw on a pair of glasses, and just stop and clean em if they fog up.
Ricky needs to get some glasses that fit, and not goggles though.
Yes
@@AnonymousAnarchist2 let me break this joke down for you. First its critical you inderstand what is a joke and that this is indeed a joke. Once you have figured out what a joke is proceed to 2.
2. The meat of the joke is ricky with foggy glasses might cut someone else. R8cky with saftey squints might maybe just possibly injure himself. But probably wont cause its rickt the boss.
When you're the chuckle head who thinks that their eyelids are ANSI certified.
Boss man to Ricky: *"Can you explain to me in crayon..."* 🖍️😂😂😂😂
"Safety squints engaged".. Now we just need to hope we dont wind up with summer teeth..
AVE
"Crayon eating terms" I love it,lol
Bossman just wanted to say you’re freaking hilarious. Love your stuff, bro. Watch it all the time.
I've seen angle grinding and cutting disks explode...
I've seen 1 bench grinding wheel explode.
Buddy had a metal cutting disk imbed into his arm.
I drove him to the hospital. He didn't bleed too much, maybe because it was hot when it went in? 🤔
I always wear a face shield and safety glasses when working with anything bigger than a Dremel.
Position yourself out of the debris field if you can. Especially with bench grinders.
Don't stand directly in front of it.
Them safety glasses didn't save his arm from those disc chunks though. Just sayin.
I use a full face shield/ safety glasses, had a couple of cut wheels explode and bolts fall directly into my face. Not to mention several other instances using a high pressure washer. USE YOUR PPE
@mimcduffee86 , no, but if he had been wearing arm glasses, he would have been good. 😉
To any electricians out there. I’ve had a piece of metal fling into my eye, while cutting a piece of conduit with my bandsaw. Shit is random and it will get you at some point
they make us cut it with a hacksaw for those reasons. I dont mind strong wanking arm does it in 8 seconds.
That is the definition of compromise. You get to cyoa with the explicit verbal compliance of ricky and Ricky gets what he wants you off his case.
Bubba!!!
Good ole saftey squints
I remember when i was 18 or so, I was grinding some piece of metal, and a shaving landed at the very edge of my eyelid almost touching my eyeball. Ever since then, I always wore safety glasses
Tell Ricky in croyon eating terms that the more ppe he has on , the less work he has to do
That's funny shit
I just watched a Saftey guy today get fired for poking a worker in the eyes for not wearing Saftey glasses. Lmao. Then ole boy pressed charges. Had the police an everything up in HR. This little clip got me rolling 😂😂
The tongue gives a bonus to accuracy!
Dr. Glaucomflecken would have a stroke. Natually: Jonathan the Loyal Scribe will Nod before he starts some fuckery.
I mean...I agree with Ricky. Always fogging up or getting sweat splashes on em, even the damn anti fog ones don't do the anti fog part very well so they suck too.
Two videos in one day? Awesome!
how can they be safe if they fog up and obstruct your vision?
Literally the only injury I've ever seen "stopped" by safety glasses, was caused by the safety glasses fogging up. Caused a kid in welding class to miss the piece of hot metal he was hammering and hit the Anvil full force, which rebounded the hammer immediately into his eye.
Safety glasses stopped him from losing the eye, sure, but they also caused him to get smacked in the face with a hammer.
Speaking as a Safety Director, If I had a dollar for every time, I told my crew to put on their safety glasses, I would be a very rich woman!!!
Safety squints are undefeated!
Oh lord Ricky should get a comedie skit at a local bar 😂
The safety man needs to hand Ricky a glass eye and tell him he'll need it next time he finds him without his safety glasses.
I learned from Grandpa that sticking the tip of your tongue out really does help with intricate or complicated tasks.
The raw realness of this hits 😂
They get sweaty and in the way! Chances of having an accident are greater with safety glasses!!😂
I know all about the saftey squints 😂
No matter how much you wear the glasses there's always that one determined piece of crap that goes around
Better to have the one determined piece, then a few lucky ones.
Ricky's got that squint technique down pat.
True story.. squint and tung out. Full PPE. I'm a welder fabricator I should know 😂😂
Oh ghee, you need to wear them, Ricky.
I've definitely always been against the safety glasses especially when it's hot because I always drove a forklift and they always fog up so makes it hard to see so always just resting them on top of my head 😂
Yea definitely always wear safety glasses I've seen alot of bad shit happen to people over the years myself included im very lucky though I can still see just fine but others werent so lucky also another tip if you are using a cutting torch always wear some super thick leather wielding gloves I've watched guys completely fry their hand in just a second because they didn't have gloves on also not something you want to happen to you
Let's go ricky
Crayon eating terms 😂😂😂😂😂
I used to be very lazy about wearing safety glasses. Then I tried wirebrushing.
Now I wear them all the time.
I shit you not, watched this yesterday morning, laughed, then about 5 hours later 'quickly' needed to clean up a weld with a flap disc on the grinder, so did not walk the 2 meters to go and get my safety glasses.......
I have a session with a eye doctor in an hour and a half to get my eye looked at. DOH
Wear your glasses
I've had 4 cutting wheels explode on me. Want to know what I had on my safety squints so they're pretty great and handy
No.
His nose won't hold them up. 😅
@@Torana-gz5ls
Boss: that's why there is a safety strap on goggles Rickie
Rickie: mmmmmk. When the safety strap or goggles prevents blades and bullets, I'm in. But till then. . . . I'm out
How about GFY
I'm still waiting for the Hyster parked beside the Honeybun😂😂😂😂😂
When you don’t wear your PPE, you’re more cautious when you work. When you always wear your glasses, you become complacent, and more likely to get something in your eye
That makes zero sense.
@@Viper42104 exactly
Sorry Ricky I gotta disagree with you. If I wasn't wearing my safety classes I would have lost my right eye
Safety squints i do that all the time lol
I’ve got a good friend who isn’t very good at wearing his glasses…I think he’s had to go to the optometrist like 6 times to get stuff pulled out of his eyes & steroids…think the last time he was in there the optometrist actually offered to buy him a nice pair of like Oakley safety glasses and he turned him down 😂
Admittedly, I rarely wear my safety glasses, unless I’m welding or chipping slag, usually if I’m grinding I just make sure my face isn’t in the line of fire…it’s worked pretty good for me, I’ve only gotten metal in my eye 1 time and I don’t believe it was from grinding, and it washed out (did really suck until it washed out though, I probably wear them more often after that.)
Omg lmfao that was bullshit funny as fck
That was Base Line cutting-edge , eating Crayon Smart ! Classic , In the future😊
Get the old frame style glass and pop out the lenses and wear a different set when you’re cutting are grinding.
Might want to try safety contacts.
Safety people at my place have been eating crayons. I plan to ask them what their favorite flavor is at the townhall meeting this month.
Can't sweep the warehouse even if it's completely empty because something might spawn into existence and fall on you.
Where I work we are being led by the real life incarnation of Homer Simpsons or Ralph Wiggum. They are all so S.M.R.T.
As opposed to what tho? You think you can do a better job as a Safety Man? Most job sites won't let you clean up after a certain time, especially alone in an empty warehouse or something. Seems to me, you just hate being safe.
@@Viper42104 Who said anything about being alone. I'm saying even if we ship every single bale we have in our warehouse and it's as empty as a basketball court we can't then take the opertunity to sweep up because a bale might spawn into existence and fall on us.
I agree Ricky me too.
Lol me in the hospital during covid , hated wearing glasses , fogging up all the time
I got me one of them short buss googaly eyed hats. Eye cover half way down. Just tip your head back and u can see
60% of the time it works every time 🤘
That face😂😂😂 swear i do the same damn thing when grinding.
So glad I don’t need to worry bout safety glasses anymore love my new job
We need Tool room Tommy vs Bossman
We had saft guy vs Tommy,... guess who won 🏆? Ha ha
Well, I have astigmatism. So I HAVE to wear safety glasses, since they have prescription lenses. It's pretty convenient, actually; safety doesn't even acknowledge me half the time.
Have RICKY show up with metal splinter in his tounge
Always thought motorcycle helmet with shield down be good ideal lol
The point Ricky should make is that you should not have to wear them at all hours of the day. Just when they are needed.
And here i started using 3m tinted safety glasses as shades because i was tired of breaking my sun glasses over and over.
RICKSTERRRR
You did a video awhile back of safety man and Ricky having this same conversation.
Ricky wants eye surgery LOL.
❤ITS LITERALLY A RULE HERE😅
I normally wouldn’t argue with Ricky. But yeah this is even a stretch for me. Wear your glasses. A lot of the other safety rules are made to cover the lowest common denominator type folks.
I took a big sliver in the eye putting cap metal on a roof once. Still can't stand wearing safety glasses
Ricky will not wear a safety glass over his brown eye.
Shaving cream. If your glasses are fogging up use shaving cream on them...don't ask why I know this and how it works.
safety squints for the win
I got eyelashes like a camel. F all that 😂 🐪
Definitely understand the tongue is sticking out a little bit for concentration❤😂
If you've ever had a mouth full of metal sparks I promise you won't do it twice unless you are mentally challenged
I had my mouth open age 23 I'm 48 now using acetylene oxygen torch with my mouth open and f up and sprayed directly into my mouth. Never once again doing anything remotely involving sparks is my mouth open. Lesson learned
Had to read the title twice the first time my stupid brain read Safety squirrels.. would have been just as funny but not quite as aggravating. i mean its way simpler to bribe a squirrel than a person.
Who needs safety glasses when you have Jesus?...the Lord almighty will protect you from all harm forever because YOU are his favourite
Safety squint is a real thiing !
Yes safety glasses
Gotta chemical burn here 1 tiny drop in the left eye
Burned like shit nearly froze my eyeball trying to flush it out with a hose
Safety squint don’t stop liquids
Safety squints are real ive gotten more shit in my eye when wearing glasses then without, knock on wood lol
Lol that's what AvE says too
I have had things get in my eys while wearing safety glasses. Richochet effe5
Chinese safety glasses
That's a I agree to disagree 😂
Where's the boss man's gold?
i had 2 pieces of metal in my left eye within a month.
😂 LMFAO
Ngl I don't want something in my eye.
ROFLMFAO!!!!!
Lmao😂
i do the "safety squints" who else does the safety squints
sometimes you gotta hold your mouth right
As someone who needs to wear glasses so I have prescription safety glasses...anyone who cant wear normal safety glasses is a weak ass wimp.
Always boss i always where my tard hat alday 😢
Second
Gang
😂😂
I tried this a few days ago and it didn’t work lmao 🤣
First babbyyyyyy
Its a lot safer cutting shit when you can see what you are cutting.... js