Nortrac Towable Backhoe from Northern Tool

Поділитися
Вставка
  • Опубліковано 23 кві 2023
  • This shows the working of and my opinion of my 15hp Nortrac Towable Backhoe from Northern Tool

КОМЕНТАРІ • 34

  • @user-yb6dp4tp8r
    @user-yb6dp4tp8r 10 місяців тому +2

    I own a Jensen mb300 towable it has been very good. Stumps rocks gravel trash brush. It has handled it all. Very well 3 years old. No troubles yet. I am very happy with this machine. And enjoy using it on a regular basis.. very much like this one

  • @maxR-kv3kt
    @maxR-kv3kt 15 днів тому

    very nice

  • @shanedevries805
    @shanedevries805 10 місяців тому +1

    Hi I put a roof over my one ,so as to keep the sun of and the rain when working , drilled holes to put split pins in the pins were the nuts kept loosening ,,works well 👍

  • @jhonkhan8153
    @jhonkhan8153 8 місяців тому

    Great kit 👌 👍

  • @scottrockett6382
    @scottrockett6382 Рік тому +1

    Very helpful. Appreciate this!

  • @markkiser9329
    @markkiser9329 8 місяців тому +2

    whats with the hydralic hoses hanging?

  • @tommyreppond8336
    @tommyreppond8336 Рік тому +1

    I am thinking about getting one first thing to go are the tires getting a trailer axle under it so can be towed.

  • @x7w6
    @x7w6 Рік тому +1

    I just need anything but a shovel! Looks like this may do it

    • @jonesvineyards9742
      @jonesvineyards9742  Рік тому

      It beats a shovel and can do more. Plus it is enjoyable. Like the difference between a lawn mower and a riding lawn mower.

  • @jtsokiehobbyandadventures6666

    When buying one of these. Will need to do a few modifications to make it better.

    • @jonesvineyards9742
      @jonesvineyards9742  Рік тому

      I have had good luck with it so far other than having to tighten all the nuts and fittings. What modifications would you suggest

    • @jtsokiehobbyandadventures6666
      @jtsokiehobbyandadventures6666 Рік тому

      @Jones Vineyards a thum is vary handy to have. If the was a nother set wheels on a hydraulic cylinder setup to help move around. Put the wheels down and pull up when working.

    • @jonesvineyards9742
      @jonesvineyards9742  Рік тому +1

      @@jtsokiehobbyandadventures6666 I totally agree with both of those.

  • @shanedevries805
    @shanedevries805 10 місяців тому

    Will add the roof goes out over the motor ☺

  • @BBrown-tx8jf
    @BBrown-tx8jf 9 місяців тому

    Would you happen to know the measurement of the width at its widest point when in tow mode? I have a6 foot wide bridge I need to get it across. Need to see if it will go. Thanks.

    • @jonesvineyards9742
      @jonesvineyards9742  9 місяців тому

      I just left Virginia so I can't measure it for a couple of weeks. I am sure it is 6' wide because when I bought a trailer it was 6' x 12'

    • @wrs52011
      @wrs52011 6 місяців тому

      Mine measures 74 inches wide.

  • @fakdaddy75
    @fakdaddy75 Рік тому

    how would it do in heavier ground with rock ?

    • @jonesvineyards9742
      @jonesvineyards9742  Рік тому +1

      I have some large rocks and parts are heavy packed clay. It has done an awesome job so far.

    • @fakdaddy75
      @fakdaddy75 Рік тому

      @@jonesvineyards9742 thanks boss. Deciding betwee nthis and a used tractor/kubuto etc

    • @jonesvineyards9742
      @jonesvineyards9742  Рік тому

      @@fakdaddy75 I have both but I use the excavator most of the time

  • @randythomas3478
    @randythomas3478 Рік тому

    Soft already previously worked dirt

    • @jonesvineyards9742
      @jonesvineyards9742  Рік тому +1

      I don't think that dirt has had cattle or a tractor on it for 4 - 5 years minimum

  • @jinx8164_
    @jinx8164_ Рік тому +5

    I would tie up those hydraulics!

    • @jonesvineyards9742
      @jonesvineyards9742  Рік тому

      Thanks for noticing. I did because they almost got caught on the bucket

  • @tomkavanaugh8175
    @tomkavanaugh8175 8 місяців тому

    The tow touge is much too short. Need to buy an extension and a third wheel to move around without towing

  • @ZukaBro
    @ZukaBro 9 місяців тому

    Gonna rip thos hydraulic lines off if you dont be careful. Wonderbif you could slap a bigger engine on this thing an pump.

    • @jonesvineyards9742
      @jonesvineyards9742  9 місяців тому

      I have tied them up but I did pinch one of the lines and created a leak.

  • @michaelott1551
    @michaelott1551 Рік тому

    Wheel bearings do not have grease

    • @jonesvineyards9742
      @jonesvineyards9742  Рік тому

      I never thought about that

    • @michaelott1551
      @michaelott1551 Рік тому

      I didn't either till I was towing on road and the bearing froze, lucky I got stopped in time, just tore up the tire.

  • @chuckwagon1892
    @chuckwagon1892 8 місяців тому

    Only seconds into the video when I noticed those hoses hanging slack like that. That's a deal breaker for me. Either it's incredibly poor engineering or an incredibly poor assembly job. That's an automatic guarantee that you'll be replacing hoses regularly due to snagging and tearing or rubbing or or pinching.

    • @jonesvineyards9742
      @jonesvineyards9742  8 місяців тому +2

      They didn't start like that. What ever was holding them up broke. I have since just used long zip ties.