Hey, I really love these lights, I have a 2008 Lancer Aspire. Would you know what these lights are called, I would really love to update the look of my lancer. Thanks Kim.
The taillights do come on when unlocking the car. The florescent bar will stay on for about a minute and the hazards will flash when you unlock. When you lock the car the hazards will flash. That's about it.
My set came with the updated resistor. You may have to go and purchase a resistor and install it. I've only see one video for guy that had to do that but I don't remember his channel name. You can also try emailing vland customer support and have them ship you an updated resistor connector.
About 1 minute into the video I show where the connectors go plugged in. If you have them that way and you still have no power, then take the connectors and flip them and insert them again. If you still have no power then you might have a faulty unit.
So i have these taillights in the smoked red but the outer passenger corner light does this flickering, and when there off a small section stays on i could show you a video of what i mean you have Instagram ?
That sounds like an issue with the wiring perhaps? I only have twitter. If not working then you may have a defective tail light. If they are less than a year old, try requesting an RMA on that light to get a replacement. Check the resistor as well cause that could also give you issues.
I've had these for a year and the drivers side brake light on the outter section has stopped working. Everything else does except the brake light. Reseated the cable and no change. Vland wont even respond to me. Any ideas?
Check the connections and look for any corrosion or indication that water may have gotten into them. If it's been more than a year of ownership, it's best to replace the tail light. I haven't had to deal with the company for any issues yet. It sucks that the light has gone out.
I haven't had any issues with my set of headlights and taillights from them. I do recall watching a video from a guy who had the Lancer Ralliart and his reverse camera wasn't working correctly after he installed the rear tail lights. He fixed it with an extra capacitor I believe.
Your amazing!! You just saved me a ton of stress on swapping the lights around to get them in the housing. Thank you so much
No problem. I'm glad this was useful for you.
I know its an older video but i was stumped couldn't get the lights to lock in switching which opening the wires came through was the fix ty.
Yeah they don't tell you what wires go where. Glad you were able to get it to work.
Great Video! I wish your video was around when I Installed mine 😂
Thanks. There aren't many out there that show where the wiring goes and what to do if the wires are flipped.
i really like the oem tail light
Hey, I really love these lights, I have a 2008 Lancer Aspire. Would you know what these lights are called, I would really love to update the look of my lancer. Thanks Kim.
Not sure but they are from the VLAND company.
Any idea if it's possible to have them come on when locking/unlocking the car.
The taillights do come on when unlocking the car. The florescent bar will stay on for about a minute and the hazards will flash when you unlock. When you lock the car the hazards will flash. That's about it.
I'm wondering what can be done if the right side Reverse LED Strip suddenly stopped working? :(
If you still have warranty on them, contact v land to get a replacement. Otherwise you may have to get a new set.
I recently installed these but my reverse camera and lights turn off after a few seconds. Where do you purchase the updated resistor?
My set came with the updated resistor. You may have to go and purchase a resistor and install it. I've only see one video for guy that had to do that but I don't remember his channel name. You can also try emailing vland customer support and have them ship you an updated resistor connector.
Hey I was wondering if you had any idea if these would fit on a Mitsubishi Lancer Activ?
If it's the hatch back or shooting brake as some call it. Then no these will not fit unfortunately.
@@josestechcorner oh cool, I have the sedan version so thanks for the help 😁
I am interested in buying this but I think the turn signal light is too small and the vehicle behind may not see you when turning
I thought that too at first. But it's bright and I haven't had anyone say anything about it. The turn signals are visible.
@josestechcorner thanks buying them soon
great installation video...like your voice is very soothing, no homo though :)
Thank you :)
Can you show what to connect where cause my don’t work idk how to fix it
About 1 minute into the video I show where the connectors go plugged in. If you have them that way and you still have no power, then take the connectors and flip them and insert them again. If you still have no power then you might have a faulty unit.
How long do these last ?
I've heard mixed reviews about longevity so I really can't say. But the ones that I've had still work fine, I've had no issues with them.
So i have these taillights in the smoked red but the outer passenger corner light does this flickering, and when there off a small section stays on i could show you a video of what i mean you have Instagram ?
That sounds like an issue with the wiring perhaps? I only have twitter. If not working then you may have a defective tail light. If they are less than a year old, try requesting an RMA on that light to get a replacement. Check the resistor as well cause that could also give you issues.
the amazon price is always for a pair (left and right)?
Yes it should be. As far as I know, they only sell these in pairs.
I've had these for a year and the drivers side brake light on the outter section has stopped working. Everything else does except the brake light. Reseated the cable and no change. Vland wont even respond to me. Any ideas?
Check the connections and look for any corrosion or indication that water may have gotten into them. If it's been more than a year of ownership, it's best to replace the tail light. I haven't had to deal with the company for any issues yet. It sucks that the light has gone out.
are all 4 supposed to be connected on the same line? bc i have the exact same lights as you do
There's gonna be a connector you're not going to use. The harness for the small running bulb will not be used. You can tuck that one away.
Dose it fit for the 2010 lancers?
Yes it does.
Cool thank you sir
where should i buy? i want it
VLand has a website you can purchase from. You can also buy them on eBay and Amazon.
@@josestechcornerokay will look forward to it, thx bro I really appreciate ur reply. I hope u have an amazing day
Now it’s a Audi. 😂😂😂
I mean.. you're not wrong lol.
dont buy from vland they give you afs light issue and never trying to help the support team is a joke
they dont even know the stuff they selling smh
I haven't had any issues with my set of headlights and taillights from them. I do recall watching a video from a guy who had the Lancer Ralliart and his reverse camera wasn't working correctly after he installed the rear tail lights. He fixed it with an extra capacitor I believe.