Trail Tech Endurance II Installation. Easy, clear, quality video on how to do this.

Поділитися
Вставка
  • Опубліковано 8 лют 2019
  • This video covers how to install a trail tech Endurance II on a dirtbike (Kawasaki KX250F)
    Trail Tech 202-118 Endurance II Digital Gauge Speedometer Ki
    amzn.to/2DzPgCv -TRAIL TECH Endurance II ON AMAZON:
    amzn.to/2tcNfav - Bondhus 13389 Set of 8 Hex T-handles with Stand, sizes 2-10mm
    amzn.to/2BpTThR -Motion Pro 08-0113 T-Handle Metric Socket Set

КОМЕНТАРІ • 18

  • @corradovanaken3553
    @corradovanaken3553 4 роки тому +3

    Ive bought this product and this is the BEST VIDEO IVE EVER WATCHED ON A INSTALLATION

  • @inthesPhila
    @inthesPhila 2 роки тому +1

    Put a Trail Tech Endurance II on my KTM EXC 250 4 stroke RFS 2003 and like it. It went right in the rubber holes that the OEM speedo came out of after a tree crinkled it.
    Two long 4 mm bolts and 4 nuts were the hot set up with two biggish washers. Bolt, then nut then washer then nut then up through rubber holes into Endurance II on both sides. Hand tighten bolt into plastic. Snug jam nut to plastic with 7 mm open end. Wiggle down into rubber holes, than run nut up bolt to snug washer against the bottom of the rubber holes. I reset both left buttons with my right thumb while riding. This will come in handy at Dual sport "resets" on the move. I kept it down low so the old style brake line is always looping above it.

  • @jking9916
    @jking9916 5 років тому +3

    I have this same speedometer on my pit bike and fixing to install another one on my enduro. Well made and not too expensive and works perfect. Great video 👌

  • @postdeath2978
    @postdeath2978 4 роки тому +1

    new text layer the bolt. Nice video and thank you!

  • @danten7774
    @danten7774 2 місяці тому

    great job

  • @ekarchery60x27
    @ekarchery60x27 4 роки тому +4

    Good video. Your forks are leaking

  • @vendetta1306
    @vendetta1306 5 років тому +3

    Bless you

  • @BillyTzENDURO
    @BillyTzENDURO 4 роки тому

    Interesting seeing the installation, really thinking of getting one, does it run on an internal battery? or where does it get power from?

  • @TopshelfJunior
    @TopshelfJunior 3 роки тому

    Taking a complete shot in the dark here but, I have a 2020 KLX300R trail bike.. Does anybody know a good speedometer / tacometer I can add to the bike ?!

  • @jeffpaxton9172
    @jeffpaxton9172 2 роки тому

    Why didn't you mount the sensor to your fork guards?

  • @muriuwangai3617
    @muriuwangai3617 Рік тому

    Hi, am trying to acquire a used vapor speedometer online without much success. Am scared of getting a disfuntional one to kenya. I need one for my Serow xt 225. What's your take? Been following your videos

  • @JanChacn
    @JanChacn 2 роки тому

    How about rpm sensor?

  • @seanylewl
    @seanylewl 4 роки тому

    How do you power the unit?

  • @danten7774
    @danten7774 2 місяці тому

    that bolt is a nut and the screw is the bolt

  • @daydaylol209
    @daydaylol209 4 роки тому

    So how’s it get power ?

    • @pickels2598
      @pickels2598 4 роки тому

      MXG 209 Runs on an internal battery like a watch

  • @fishybastards
    @fishybastards 8 місяців тому

    Its a nut not a bolt.