VAS traction bars/how to install

Поділитися
Вставка
  • Опубліковано 13 вер 2024
  • VAS traction bars/how to install
    ❗️❗️ www.vasfab.com... here is the link to the site ❗️❗️

КОМЕНТАРІ • 52

  • @eddiecruz5591
    @eddiecruz5591 2 роки тому +2

    You should have removed your over load springs, those are the flat springs that are in your way, you don't need them with air bags.

  • @yellowcanyon21
    @yellowcanyon21 3 роки тому

    I’m going next week to his shop to get a set out on my truck

  • @onewheelup
    @onewheelup 3 роки тому

    i need a set bad for my ls swapped blazer but im scared its going to bottom out,haha even leaving my rough as drive way you know.damn,looks good though and im sure they work.

  • @VileMisanthropy
    @VileMisanthropy 4 роки тому +1

    You going to replace that broken leaf?

  • @christiannovoa7288
    @christiannovoa7288 Рік тому

    I have a 10 in rear drop would the traction bars be to low to the ground if i i stall them on my truck ?

  • @Alex-em2zs
    @Alex-em2zs Рік тому

    Should i put these on my ford lightning

  • @smokingfoos
    @smokingfoos 3 роки тому

    did he have a problem with running these with air bags? cuz i have some too and was thinking the same thing? thanks for the cool videos

    • @CarlosLtx
      @CarlosLtx  3 роки тому

      He didn’t have any issues

    • @smokingfoos
      @smokingfoos 3 роки тому

      @@CarlosLtx do you know if i air up do i gotta adjust them?

  • @duaijalnoaimi7807
    @duaijalnoaimi7807 7 місяців тому

    Do you have nosie on bad rod after installin?

  • @elbergasjason494
    @elbergasjason494 4 роки тому +2

    Would it be as effective with only one leaf spring?

  • @logantic
    @logantic 4 роки тому +2

    When daily driving do they make alot of clinking noises? I ask because I bought some caltracs traction bars and they are noisy. Does these have the same issue?

    • @CarlosLtx
      @CarlosLtx  4 роки тому

      These yubhave the option to use some polyurethane bushings that screw into the front

    • @logantic
      @logantic 4 роки тому

      @@CarlosLtx so is that a yes or no?

    • @Cesar-sg3zj
      @Cesar-sg3zj 4 роки тому +1

      Lokeni Siuta yes

    • @240jzkiller2
      @240jzkiller2 4 роки тому

      Do they help to not spin from a dig

    • @logantic
      @logantic 4 роки тому

      @@240jzkiller2 yes they do help alot

  • @kjbreaux16
    @kjbreaux16 5 років тому +2

    Did they really help?

  • @ptsleeper911
    @ptsleeper911 3 роки тому

    Dope truck

  • @BillaBong1
    @BillaBong1 2 роки тому

    Does this help with wheel bounce, rear drive shaft from lifting when straight gunning it? I need a traction bar but dont know what to go with this seem the simplest no drilling. But what im also wondering is installing it on the leaf spring woulndt still flex and stuff like normal?

    • @CarlosLtx
      @CarlosLtx  2 роки тому +1

      Yes it stops wheel hop

  • @240jzkiller2
    @240jzkiller2 4 роки тому +1

    Bro wats better vas or calc tracs

    • @CarlosLtx
      @CarlosLtx  Рік тому

      I haven’t tried caltracs so I can’t say

  • @dustyrhodes1655
    @dustyrhodes1655 4 роки тому

    FYI the bump stops come with the kit now.

  • @patrickm.8425
    @patrickm.8425 8 місяців тому

    You skim "readed" the instructions? ROFL! Scary shit!

  • @ericmorales9694
    @ericmorales9694 4 роки тому +1

    Have you had any problems?

  • @spraypaintgenuis102
    @spraypaintgenuis102 Рік тому

    What happened to all your videos?

  • @morphius747
    @morphius747 4 роки тому

    so would this even be necessary on a 2.4 tacoma?

    • @randomvideos3026
      @randomvideos3026 4 роки тому

      its a tacoma i hope you dont plan on doing anything with it

    • @morphius747
      @morphius747 4 роки тому

      @@randomvideos3026 oh no sir I want to have it all stock, the guy I bought it from had some rims put on that work but I want to go back to the 14 in rim (I got 16s now). It was leveled to but I was just wondering if this inherent flaw would need to be sorted out. I think it's working just fine as is and I want to keep it the way Toyota intended

    • @randomvideos3026
      @randomvideos3026 4 роки тому

      @@morphius747 it was mainly a joke like im a made in the usa type of person lol

    • @swappedoutZ71
      @swappedoutZ71 4 роки тому

      @@randomvideos3026 you could 2jz swap it or ls swap it ive seen both done several times

  • @jaymeramirez7435
    @jaymeramirez7435 4 роки тому +1

    Where you from?

    • @jaymeramirez7435
      @jaymeramirez7435 4 роки тому

      Pasadena

    • @mikekoksmal5053
      @mikekoksmal5053 4 роки тому

      latin kingz 🐍

    • @onewheelup
      @onewheelup 3 роки тому

      @@mikekoksmal5053 ohhhhh shit haha old school north side low rider car club,at least thats what it was when i was in school in the 80's.they did some bad ass graffiti too.sam houston high.

  • @GyroPyro121212
    @GyroPyro121212 5 років тому

    Do you still have the white F-150?

    • @CarlosLtx
      @CarlosLtx  5 років тому

      No my friend sold it

    • @GyroPyro121212
      @GyroPyro121212 5 років тому

      Carlos Ltx ‘Tis a shame. She was a killer

    • @CarlosLtx
      @CarlosLtx  5 років тому

      He has a new f150 4x4 with a whipple

    • @GyroPyro121212
      @GyroPyro121212 5 років тому

      Carlos Ltx nice!

  • @cristianponce2388
    @cristianponce2388 4 роки тому

    What wheels are those/ size

  • @juniorcarter2066
    @juniorcarter2066 5 років тому

    I'm here first

  • @Nocolon1981
    @Nocolon1981 4 роки тому

    What company sells those black and chrome star wheels