SolidWorks Tutorial
Вставка
- Опубліковано 11 жов 2024
- sw-tc.net/#209 SolidWorks Tutorial : Corkscrew
Keywords: conical helix, tapered helix, rack gear,
►Website: www.SW-TC.net
►Facebook: / solidworks.tutorial.page
►Engine Project :► • Project 10: V6 Engine
►Tractor:► • Project7: Tractor
►For more SolidWorks Tutorials: ► • SolidWorks Practical T...
►CATIA Complete Learning:► • CATIA Complete Learni...
►Inventor Complete Learning:► • AutoDesk Inventor Comp...
►SolidWorks Surface Tutorials: ► • SolidWorks Surface Tut...
►Solidworks Sketch Tutorials: ► • SolidWorks SKETCH Tuto...
►SolidWorks Beginner Tutorials: ► • SolidWorks Complete Le...
►SolidWorks Weldment Tutorials:► • Playlist
►Available Playlists : ► / @sw-tcnet
►Learn Engineering Playlists:► / @tutorialsengineer
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
All dimensions are in mm/g/s/ISO - Based on true dimensioning.
---------------------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
----------------------------------------------------------------------------------------------
The uploading of tutorials is based on an accumulated studied plan!
----------------------------------------------------------------------------------------------
New to SolidWorks?! Recommended to watch my earlier uploads.
----------------------------------------------------------------------------------------------
I will be thankful to you for replying whom are in need.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Hello & Welcome to SolidWorks Tutorial Channel
This channel is dealing with EVERYTHING about SolidWorks aims to make the viewer a professional SolidWorks user! & to be helpful !
This Channel contains topics about:
SolidWorks Beginners Tutorials
SolidWorks Sketching
SolidWorks Surface
SolidWorks Weldments
SolidWorks Assembly
SolidWorks Drawing
SolidWorks Sheet Metal
SolidWorks Mold Design
SolidWorks Simulation
SolidWorks Motion
And MORE
►►►SUBSCRIBE ◄◄◄
-------------------------------------------------------------------------------------------
GO PROFIST ...BE SOLIDWORKIST ◄ suggested words!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
----------------------------------------------------------------------------------------
★------ ۞ ART ۞ ENGINEERING ۞ CREATIVITY ۞ ------★
----------------------------------------------------------------------------------------
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
OTHERS:
►MAGMA "Casting":► • 9- MAGMA 5.2 Tutorial:...
►MATLAB:► • 1- MATLAB TUTORIAL for...
►Electronics & Arduino :► / @electronics-tutorial
■Facebook 2support:► / solidworks.tutorial.page
■Google+ 2add:► plus.google.co...
■Donation :► www.paypal.com...
Um simples obrigada é pouco para a ajuda que me deste, eternamente agradecida.
O 20 é teu meu menino, sempre a puxar croquetes, tamos juntos 🤜🏼🤛🏼
I love your videos and have learned so much so thank you. However, I've noticed the amount of questions asked on most of your videos regarding some errors or confusion viewers face so it would be great if you answer their questions
I've been missing your tutorials. Happy for having you back!!!!!!!!!!!!!!!!!1
Hi, I have one comment about the model. In reality the screw can be twisted and that too causes the side arms to rotate. In your video however, the side arms are controlling the screw. Why haven't you taken that "gear" type relationship in account because when you rotate the screw in the model the arms do not rotate.
There is also a huge interference issue with the arms and the screw themselves. Can you please put a corrected video up
Could you tell me what all the separate sets would be? I need it for a college project
Thanks so so much. It was an amazing tutorial. May I ask how you come up with these dimensions? Do you use a real model?
where did limit distance 1 come from in your mates? (at 53:37) it just appeared after you mirrored....
Such a pitty that there's no voice and few instructions. Some mistakes made my work few hours longer. But thank you for this tutorial :)
thank you very much
You're back! :)
it will be good if you provide the drawing of its all view along with th dimension
Thank you.
hi, is it possible to have the file?
Hello Sir, it's an amazing work. But i am facing some problem. Please help me. In your Model, You can move the whole part by moving part 2 or part 3. But i can't. If i move part 3, which is the pinion, the part 2 moves, but when i try to do this on other way, it doesn't work....Part 2 in my assembly becomes fixed when i try to move it, but it becomes float when i move the part 3. Can you tell me what's the problem? Where i made mistake??
Hi can you make a video explaining how to do the exploded view of that?
My Goodness, you have done an amaizing tutorial but why without Audio.... i would have given you 100/100 if there is Audio.
for audio visit cadcamster youtube channel
thank you
Parts where to download
Plz provide link
When I made second part it all turned yellow before revolved boss/base option. why?
Internally is not ok as there is collision but overall it was fun.
I agree, WoW !!!!
Superbe
hey !! how can i get ur dimensions :/ like PDF file plz
wow!!!!!!!
fantastic :)
thnx bro
Se pueden importar a Catia?
what do you do at 7:32?!
this job not accomplished !! he missed so many "MATE"!!