Haha cheers Mick! 🙏 yep, poking straight out of the top🤦 all was fine until the monsoon came and the moronic owner of the car switched his brain off🤦 Tight lines if you’re out and about 🤞💪
Nice drone footage 👍 unfortunately tho that isn’t the chair , the chair is further north , where your at is just the high ledges at the base of Pern Carr had some nice bags in that area in past
Nice one mate just a pity the fish weren't playing ball 🥴. As said by RW try ice on the joint for a few min and with a pair of grippy gloves hopefully it'll come undone 🤞 Regards Arnie
You need to get yourself a kayak, best thing ive ever bought, had some amazing fishing at beadnell, the castle, cambois etc never failed lately you'd love it
Nice video once again ,love the marks you have in north east ,regarding stuck rod if all else fails take but cap off and ram a stout dowel up to hit top section ,worth a go before damaging exterior of rod atb
Nice try pal👍 next time the HST comes apart clean the female part out with a bottle brush and let it dry..put a little smear of grease on the male section and gently twist it in backwards and forwards and keep cleaning both sections out.. could take an hour to do but it works a treat.. don't use sandpaper.. it'll take years off the spigot 👍
@@fullcircleangling I had the same problem... Mine locked up while fishing and I even had 2 large fellas + myself trying like hell to get it apart. Would not fit in the car so I was driving home with the thing sticking out the window... Looked on youtube and found ice was the solution. I was skeptical but hell it just worked prefect.
Frustrating doings this sea fishing malarkey init 🤣 I've had a day on the holderness coast today with my dad, weather wise absolutely bang on, outta wind shaded by hill behind, breakers must of been 6ft 😂 rods were dancing however dad managed a dab bass codling me on other hand nothing 🤣🤣 hay hoe, big up on the beautiful shot of the scenery 👍 n tight lines cheers
Not being clever but Seriously not differcult to get stuck rods apart. Butt cap off, take anytype of preferably round rod pole length, slot it up inside the length of butt section till it connects with plugged tip end section inside the joint, and tap it out. Minimim hits obviously best, wooden dowel rod ideal. Best to put some protection on end of dowel or pole which will hit internally the plugged bottom of the tip section. Ive even used a tubular leg of a golds rod stand. Ofcourse this is possibley last course of action but in all honesty over the years l jambed tight, by accident rods jumping around the rocks with rod in hand, my raptors and t1000s that no amount of pulling apart from two big guys worked. Two or three solid taps with a mallet, pops it out everytime, no damage , no busted rings, nothing.This by far the easiest best solution,.
Tough one there buddy, the both marks look awesome to fish to be fair, not a happy ending thou lol! stay safe bud
Cheers mate. Yeah tricky session but always nice to be out. Tight lines 👍
Love your Vid's, keep them coming, was laughing at the state of the car, the drone gives a worrying picture of erosion with the fresh lying rocks.
Cheers David really appreciate that mate🙏 the car was tough to take at the end of that session 😂😂 pity about the erosion yes. Tight lines 💪👍
Great video mate and well done for the effort 👏 shame for the end😞 take care and tight lines 🎣👊💪
Thanks very much mate appreciate that🙏 yeah tricky ending but never mind 🤦 tight lines💪
Great vid, cracking drone views of newton 👍😁🎣
Cheers Wayne much appreciated mate🙏 tight lines 👍
Class mate the start of the video was top class 😂😂
Am guessing the rod was through the sun roof
Haha cheers Mick! 🙏 yep, poking straight out of the top🤦 all was fine until the monsoon came and the moronic owner of the car switched his brain off🤦
Tight lines if you’re out and about 🤞💪
Nice drone footage 👍 unfortunately tho that isn’t the chair , the chair is further north , where your at is just the high ledges at the base of Pern Carr had some nice bags in that area in past
Correct
Noted mate👍 I did think ‘have I got this wrong?’ I’ll know for next time.
Tight lines and thanks for commenting, much appreciated 👍
Unlucky matey shame about the sun roof to top it off lol👍🏻🎣
Hahaha cheers mate! Yeah not what I needed 😂🤦
Nice one mate just a pity the fish weren't playing ball 🥴. As said by RW try ice on the joint for a few min and with a pair of grippy gloves hopefully it'll come undone 🤞
Regards Arnie
Cheers Arnie mate. Yeah I’ve managed to sort it now thankfully! Tight lines 👍
You need to get yourself a kayak, best thing ive ever bought, had some amazing fishing at beadnell, the castle, cambois etc never failed lately you'd love it
Cheers Mark! I may well consider that mate👍
So much fun pal
Keep that sunroof open a little longer and you might get some fish in the car 😜 congratulations on the bass comp by the way
😂😂cheers Matthew! Yep more chance of that happening that particular day! Onwards and upwards!🤞🤞 tight lines 👍
Nice video once again ,love the marks you have in north east ,regarding stuck rod if all else fails take but cap off and ram a stout dowel up to hit top section ,worth a go before damaging exterior of rod atb
Cheers Alan much appreciated mate. Fortunately I’ve managed to sort it now but cheers for the heads up. 👍
Tuff day mate ,but putting the effort in 💪
Cheers mate. Yeah tricky one but always next time 💪👍
Never mind mate we all have bad sessions that last bit was 😂 if you ever want ago over the west coast mate I be more than happy 😊 cheers tight lines.
Yeah they happen don’t they. 😂Spot thanks for that, tight lines 👍💪
Spot on mate 😊
Nice try pal👍 next time the HST comes apart clean the female part out with a bottle brush and let it dry..put a little smear of grease on the male section and gently twist it in backwards and forwards and keep cleaning both sections out.. could take an hour to do but it works a treat.. don't use sandpaper.. it'll take years off the spigot 👍
Thanks very much for the heads up, appreciate that 👍
Unlucky mate
Cheers Carl hope you’re well👍
Just showed me 11yr old son this to show him even the shit hot anglers have blanks. Never flooded me car tho 😂😂😂😂😂 great vid as always 👍👍👍👍
😂😂cheers Stephen! Yeah it wasn’t a good end to the day 😂🤦 tight lines 👍
Get a mate to hold the butt end, you hold the tip, swing the rod gently between the two of you like a skipping rope over the lawn, it will separate.
Good tip thanks a lot. 🙏👍
Yeh that bait did look tasty would you eat it😂😂
What them waders you wear please mate
Hi Eric, they’re Vision Atom from memory. 👍
@fullcircleangling cheers mate. Keep the videos coming they're a good watch
Put some ice on the joint for about 2 mins and it will just come apart
Cheers mate got it sorted in the end, thanks anyway🙏👍
@@fullcircleangling I had the same problem... Mine locked up while fishing and I even had 2 large fellas + myself trying like hell to get it apart. Would not fit in the car so I was driving home with the thing sticking out the window... Looked on youtube and found ice was the solution. I was skeptical but hell it just worked prefect.
Frustrating doings this sea fishing malarkey init 🤣 I've had a day on the holderness coast today with my dad, weather wise absolutely bang on, outta wind shaded by hill behind, breakers must of been 6ft 😂 rods were dancing however dad managed a dab bass codling me on other hand nothing 🤣🤣 hay hoe, big up on the beautiful shot of the scenery 👍 n tight lines cheers
Cheers Danny really appreciate that mate🙏 tough going but always next time. Tight lines 👍
@@fullcircleangling indeed look forward to the next installment l, take care n tight lines 👍
cant win em all
Exactly Gavin 🤷♂️
Not being clever but Seriously not differcult to get stuck rods apart. Butt cap off, take anytype of preferably round rod pole length, slot it up inside the length of butt section till it connects with plugged tip end section inside the joint, and tap it out. Minimim hits obviously best, wooden dowel rod ideal. Best to put some protection on end of dowel or pole which will hit internally the plugged bottom of the tip section.
Ive even used a tubular leg of a golds rod stand. Ofcourse this is possibley last course of action but in all honesty over the years l jambed tight, by accident rods jumping around the rocks with rod in hand, my raptors and t1000s that no amount of pulling apart from two big guys worked.
Two or three solid taps with a mallet, pops it out everytime, no damage , no busted rings, nothing.This by far the easiest best solution,.
Another very good video as usual, keep up the great entertainment 🐟🎣😎👍🏻
Thanks David appreciate you taking the time to explain that🙏 tight lines👍
I'm not the only one who drops a rod and reel for a bad performance like a football or rugby coach.
They need to be reminded of who’s boss from time to time! Tight lines🙋♂️👍