Hi, we are sorry for that, here you go! makerworld.com/en/models/17483#profileId-22113 makerworld.com/en/models/127955#profileId-138496 makerworld.com/en/models/145202?from=search#profileId-160341 www.printables.com/model/406756-wye-another-y-splitter
I agree. I struggled with ASA warping and splitting until I found Azurefilm. It's epic stuff and prints so much easier! A few more colours of ASA would be awesome 😊
That first one that traps the filament strand will block the chute as soon as you do any multi colour print over 50 or so colour changes - there are better ones to install like one that uses a silicone scrubber from the A1
The poop chute doesn’t work and keeps the plastic stuck. The bin also clogs the passageway. The vibration feet are not useful as the x1c has an automatic vibration calibration
My issue with the first one is the sometimes (like in the video) the v groove that keeps it from being pulled also keeps it from falling into the chute and it causes the hole to fill prematurely
i've used the poop chute system before honestly wouldn't recommend it the fillament gets stuck to it and over time gets dragged back up and flung all over the chamber either as really fine sting/cobweb or in tiny chunks, used it for a couble days but after multiple failed prints where those micro-poops were landing on the parts and getting melted into them by the nozzle.
Might try Teflon spray and slice engineerings paint on anti stick product. Could print it in PETG if you print mostly PLA too since they don't bond well
Do not install 3d printed anti vibration feet on any 3d printer. There are a lot of safer options ready on the market for you to put your expensive machine on something that you can't even guarantee if it works or not
Agree, I have a Creality K1 and do not use neither the feet's that come with the printer, actually my printer it's placed on a stone table, so no feet, give a better vibration transmission and per consequence, better stability. If you gonna use on a normal table, there's a super cheap upgrade, a concrete slab + medium density foam (any type that matches). The most important part to eliminate the vibration it's give more inertia.
Pas bgt kmrin nonton live seseorang soal peluang kerja. Yang doi udh nunggu lowongan atau kesempatan kerja dri si A tpi belum ada kepastian selama bbrpa bulan. Sedangkan si B udh nawarkan kerjaan pasti tpi gaji tidak sesuai peluang si A. Sayapun pernah dpt iming2 project kerjaan yg fantastis cuma setelah 1 Minggu follow-up gak ada kepastian sebaiknya langsung kerja yg pasti2 aja buat ningkatkan skill dan relasi. Toh abang msih fresh graduate jdi peluang kerja di luar negeri msih terbuka lebar. Walaupun di amerika sana badai PHK juga. Kyak mecat orang itu gak ada segan2nya. Jdi ya keputusan si abang. Cuma saran saya klau udh ada peluang yg pasti dan kontrak yg jelas sebaiknya itu dlu diambil buat ningkatkan skill
Hi, here you go! :) makerworld.com/en/models/17483#profileId-22113 makerworld.com/en/models/127955#profileId-138496 makerworld.com/en/models/145202?from=search#profileId-160341 www.printables.com/model/406756-wye-another-y-splitter
А мне наоборот первое понравилось, вечно эта сопля тянется, у меня даже первое включение и первый кораблик из-за нее и закосячился, я попробую распечатать ее
@@AzureFilm3D у меня тогда на неё налипло очень много пластика и была опасность что может что то стать не так. Какашки не всегда падают, а иногда прилипают
Hi, here you go: makerworld.com/en/models/17483#profileId-22113 makerworld.com/en/models/127955#profileId-138496 makerworld.com/en/models/145202?from=search#profileId-160341 www.printables.com/model/406756-wye-another-y-splitter
Hi, here are the links: makerworld.com/en/models/17483#profileId-22113 makerworld.com/en/models/127955#profileId-138496 makerworld.com/en/models/145202?from=search#profileId-160341 www.printables.com/model/406756-wye-another-y-splitter
So some guy designed the Bambu.and most 3d printers And still couldn't build it right. Typical males. SMH But they will charge you more for the next model that will need more...UPGRADES!
In our opinion, this printer doesn't need upgrades, and it works really well without them. These are just some options we tried to present in case someone would like to experiment. 😁
@@AzureFilm3D It does need upgrades. It's all on youtube. One is adding led lights to see inside the box. The one included is not good enough. And there are others. This applies to other printers not just Bambu.
None of these are required. The poop bin and the Y splitter took no time at all and are simply a nice to have. Just say you can't afford $1200 and move on. Paid for by whothehellcares gang
of course no links in description or comments 🤷♂️
Hi, we are sorry for that, here you go!
makerworld.com/en/models/17483#profileId-22113
makerworld.com/en/models/127955#profileId-138496
makerworld.com/en/models/145202?from=search#profileId-160341
www.printables.com/model/406756-wye-another-y-splitter
ça serait cool d'avoir les liens des STL""
@@AzureFilm3D
@@AzureFilm3D
@@AzureFilm3D
Those bins fill in two seconds i like the poop catcher tho i might have to try that out
You should try it!
I just noticed who the video maker is and came to say thanks for your filaments , really good price and quality !
Thank you so much!
I agree. I struggled with ASA warping and splitting until I found Azurefilm. It's epic stuff and prints so much easier! A few more colours of ASA would be awesome 😊
That first one that traps the filament strand will block the chute as soon as you do any multi colour print over 50 or so colour changes - there are better ones to install like one that uses a silicone scrubber from the A1
This reminds me of the da vinci 3 in 1 enclosed it has a lot of the same problems
The poop chute doesn’t work and keeps the plastic stuck. The bin also clogs the passageway. The vibration feet are not useful as the x1c has an automatic vibration calibration
Yes, these wont work for everyone, we just 3D printed them to show you can have some extra fun while you are at it. :)
@@AzureFilm3D with the poop chute you just don’t print the slope and just make the container and you are all right
My issue with the first one is the sometimes (like in the video) the v groove that keeps it from being pulled also keeps it from falling into the chute and it causes the hole to fill prematurely
i've used the poop chute system before honestly wouldn't recommend it the fillament gets stuck to it and over time gets dragged back up and flung all over the chamber either as really fine sting/cobweb or in tiny chunks, used it for a couble days but after multiple failed prints where those micro-poops were landing on the parts and getting melted into them by the nozzle.
That's interesting. We sare testing it for the past few days and haven0t had any problems yet. Thanks for the info!
Might try Teflon spray and slice engineerings paint on anti stick product.
Could print it in PETG if you print mostly PLA too since they don't bond well
You can buy the anti vibration feet on the bambu shop
Do not install 3d printed anti vibration feet on any 3d printer. There are a lot of safer options ready on the market for you to put your expensive machine on something that you can't even guarantee if it works or not
Good thing we can test and find out if they work. ;) They are a great upgrade for us.
In that cause show us the rest and the results. Thanks! 😊
Agree, I have a Creality K1 and do not use neither the feet's that come with the printer, actually my printer it's placed on a stone table, so no feet, give a better vibration transmission and per consequence, better stability.
If you gonna use on a normal table, there's a super cheap upgrade, a concrete slab + medium density foam (any type that matches). The most important part to eliminate the vibration it's give more inertia.
@@AzureFilm3D original feed from bambu lab are way to cheep than not just buy and use them if you are already into the bambu lab game
Bambu sell them very cheap..
the anit-vibration feet make no sense in combination with the poop chute you chose, bro ...
We don't use them together all the time. The purpose of this video was to show all the things you can do. :)
Pas bgt kmrin nonton live seseorang soal peluang kerja. Yang doi udh nunggu lowongan atau kesempatan kerja dri si A tpi belum ada kepastian selama bbrpa bulan. Sedangkan si B udh nawarkan kerjaan pasti tpi gaji tidak sesuai peluang si A.
Sayapun pernah dpt iming2 project kerjaan yg fantastis cuma setelah 1 Minggu follow-up gak ada kepastian sebaiknya langsung kerja yg pasti2 aja buat ningkatkan skill dan relasi. Toh abang msih fresh graduate jdi peluang kerja di luar negeri msih terbuka lebar.
Walaupun di amerika sana badai PHK juga. Kyak mecat orang itu gak ada segan2nya. Jdi ya keputusan si abang. Cuma saran saya klau udh ada peluang yg pasti dan kontrak yg jelas sebaiknya itu dlu diambil buat ningkatkan skill
“Why did you buy this 3d Printer?”
“Well duh, so I could upgrade it with 3d printed upgrades”
Exactly!
How about a z motor that doesn't shit out a week after buying my printer
In need a slim poop bib because my banbu is very close go the wall this one one the video might work
That's awesome!
Can you make a fumes extractor vent so i can easily suck off dangerous fumes
Apparently anti vibration feet’s just suck. And the best thing to use is a slab of concrete
Great now i dont have to make these parts when i buy mine
Wow, where can i find the STL fils ? :)
Hi, here you go! :)
makerworld.com/en/models/17483#profileId-22113
makerworld.com/en/models/127955#profileId-138496
makerworld.com/en/models/145202?from=search#profileId-160341
www.printables.com/model/406756-wye-another-y-splitter
@@AzureFilm3D thank you :)
How do I copy it? (I’m new to UA-cam btw)
@@AzureFilm3D
Can you give me the STL file for the poop shoot please (new sub)
Here you go: makerworld.com/en/models/127955#profileId-138496 :) And thanks for subscribing!
I cant wait for my printer to fall when those feet break
Anyone know how long the sale is good till?
December 3rd last I saw.
the moment where you use the rubber feets its pointless to have a on contact poop collector
Where can i find these stl files?
Send us a message on any platfrom. 😉
Can I make these upgrades on my P1S as well? It would be nice to make anti-vibration feet 😄
There are probably upgrades you can do on P1S. Try to search the Maker Worlds website. 🙂
What’s next? Just buy a nozzle and print your own printer! 😂
Wish I had one tho😂
На счёт первого дополнения, я бы не ставил😢
Why?
А мне наоборот первое понравилось, вечно эта сопля тянется, у меня даже первое включение и первый кораблик из-за нее и закосячился, я попробую распечатать ее
@@AzureFilm3D у меня тогда на неё налипло очень много пластика и была опасность что может что то стать не так. Какашки не всегда падают, а иногда прилипают
Stl please 😂
Send us a message on any social channel. :)
Can we get the stl files
Send us a message on Instagram or Facebook! :)
Сколько бы разработчики 3Д принтеров не придумывали фишек, люди все равно его будут допиливать, ахахахаха.
Сразу нельзя производителю сделать все по человечески
link stl
Hi, here you go:
makerworld.com/en/models/17483#profileId-22113
makerworld.com/en/models/127955#profileId-138496
makerworld.com/en/models/145202?from=search#profileId-160341
www.printables.com/model/406756-wye-another-y-splitter
Where is the files?
Hi, here are the links:
makerworld.com/en/models/17483#profileId-22113
makerworld.com/en/models/127955#profileId-138496
makerworld.com/en/models/145202?from=search#profileId-160341
www.printables.com/model/406756-wye-another-y-splitter
@@AzureFilm3D thx bro ☺️👍
c'est nul sans les liens
Hi! You can get all the links on our instagram profile, the highlight is called "Cool STLs" ;)
bambu lab is waste of money
Then you should really do some research haha
Printer for noobs
What kind of printer is your favourite?
So some guy designed the Bambu.and most 3d printers And still couldn't build it right. Typical males. SMH But they will charge you more for the next model that will need more...UPGRADES!
In our opinion, this printer doesn't need upgrades, and it works really well without them. These are just some options we tried to present in case someone would like to experiment. 😁
@@AzureFilm3D It does need upgrades. It's all on youtube. One is adding led lights to see inside the box. The one included is not good enough. And there are others. This applies to other printers not just Bambu.
Hear me out… but I think you shouldn’t have to spend 100 hours printing upgrades to fix a $1200 printer.
Paid for by flsun v400 gang.
We are not fixing it, we are upgrading it! :) But you definetly have a point!
Have you ever come across klipper has disconnected issue mid prints? I can't get my v400 to work anymore
None of these are required. The poop bin and the Y splitter took no time at all and are simply a nice to have. Just say you can't afford $1200 and move on.
Paid for by whothehellcares gang
@KST