How To Make Self Balancing RC Submarine - From PVC Pipe- Amazing DIY Projects
Вставка
- Опубліковано 31 січ 2025
- #How To #Make A #Submarine ✅ - From PVC Pipe - #DIY Projects
Arduino Circuit Diagram and Code:-drive.google.c...
Submarine Circuit Diagram:-drive.google.c...
*#*Components
1. 10 syringe
2. 2 gear moter
3. 555 moter
4. 5 Sg90 servo moter
5. 10 limit switch
6. Arduino uno board
7. Motion sensor mpu6050
8. 1 6000mAH Lipo Battery
9. flysky transmitter and receiver
10. 4'' Pvc pipe And two endcap
11. Aluminium plate
12. 8mm Thread bar
13. Gasket glue
I'm an engineer by training and this is one of the most creative projects I've ever seen. I really enjoyed watching your build. Time after time you demonstrated unusually creative approaches to solving problems; you're an inspiration to us all. Keep up the great work and I look forward to what else you will build!
Thank you very much!
And by education?
Srs. question. What does you being an engineer have to do with any of this?
@@creativemind6579 💝💝💝💝💝💝💝💝💝💝💝💝💝
Buddy, wait till you discover RCsubguy
That's pretty awesome :) You should refine this ideal, by making a glass bubble in front, with a camera mounted inside. Give it voice control so you can say things like, "15 Degree down bubble", or "make my depth zero-five-zero!" , "come to heading two-five-six", "make turns for 15 knots", "periscope depth"... that would be pretty cool.
Congratulations on your creativity, I was really surprised by the accuracy of your submarine's operation.
I hope you get the recognition, because a video like this takes a lot of time.
Thank you very much!
@@creativemind6579 hey bro he is a American engineer check his channel
ua-cam.com/video/fzAo-OqZ_54/v-deo.html
00
like
Absolutely amazing how that person took common pieces of everyday life and turned it into a little functional machine submarine.
very impressive.
Look what can be done without 3d printing and cnc machines, fancy eletronics and brushless motors. Amazing job, impressive skills!!
When you see creativity greater than your creativity, you feel that you are helpless 😄
yeah, i create also a "rc submarine" but is difficult for ballast: do you had find for this ?
Brilliant, superb work, still hope for humanity. With people like you !
You're a genius! 30 minutes for us to watch... and 30 weeks of work for you. Fantastic
This is my second ty viewing of your submarine diy; to be frank at my age of 69 if I watch your this video I become a 25 years old . Thrilling experience and your beautiful engineering mind set. God bless you. You can offer this ti the people who love at a price. If you quote and the price if it is an affordable one I will go for it. Marvelous.
Sahi bole dadaji
I think he showed us enough in the (super fantastic) video for us to make something similar. I'm planning on making something like this myself.
There's a link to the Arduino code in the description. The RC parts are not very expensive these days.
i have also made an submarine like that but not RC,but my opinion towards your one is WOW.
You are a genius man who deserves all the best and encouragement how to communicate with you
Jducgdjfugdbofchdn কিাবনিরবনরজিনরন হধদফচগদকদurrctcg
مرحبا
@@rafiqeshita9285 pagol
ua-cam.com/video/fzAo-OqZ_54/v-deo.html
Absolutely AWESOME design and engineering! Just Amazing. Especially with limited tech tools. Great ingenuity and workmanship. Well done, Sir!
Pray for KRI Nanggala 402 Indonesia 🇮🇩😢😢
Lagi lagi ada orang indo
@@user-ss9rx7ks9h beranda gua jd ttg kapal selam semua ngab
@@ronnyrn_ sama gw juga gara gara nonton berita nangala 402
INDONESIA ADA DIMANA MANA
my from indonesia
One of the most difficult RC Models to build and engineer, you have done an amazing job 👏🏼👏🏼👏🏼
is it more difficult than making a r jetliner?
Pray from Indonesia 🇮🇩❤ K.R.I Nanggala
Y
@SK glory wtf you call our submarines trash ???
@SK glory the submarine are not made in indonesian,so you are not say to Indonesian country
@SK glory kri nanggala are made by german
@SK glory understand that the submarine is old, almost 40 years old
i from viet nam love love
I'm from buon ma thuot
Thank you
đây nha
I love you pặc pặc
Lee
Awesome project, hands down one of the best implementation of this.
Just wanted to point out one thing, the propeller should be reversed for better flow and if you can fit a shroud around the propeller it would give more flow
A propulsor duct would help, as would a more hydrodynamic propulsor (propellor with multiple curved blades...), with a tapered tip.
Too happy to see this type of work in India to proud. Great
You've taken it up several notches further! This is incredible!!!
Love From Bangladesh 🇧🇩❤️
Super work! You should remove the propeller and just flip it the other way (back to front) for better forward thrust. Also fix a cowl around it for better directional water flow. Sub will go significantly faster.
You caught that mistake too. I was searching to see if someone saw it so I don't have to repeat.
Best Sub Build and Drive/Dive video I've seen on YT
This is beautiful modern art of engineering. You also have the best instruction of ballast mechanics I've ever seen. Thank you.
اااااتتا
اااؤ٧
Semakin hari semakin maju karia anak bangsa ini yang di sebut jaman tehnolokgi
Looks awesome! As I was watching this video I noticed a couple changes that could be made to improve the performance of the sub.
First is your choice of radio frequency, which may have been the result of what parts you had on hand. Radio waves at 2.4 GHz do not penetrate water well at all. An older lower frequency radio (40 MHz or 27 MHz) will be significantly better at transmitting a signal through the water.
Second is the automatic trimming system. It looks like it balances the boat really well, but when it's operating it changes the total buoyancy of the sub which will make depth control more difficult. Manned subs use dedicated trim (ballast) tanks, and changing the pitch trim involves moving equal amounts of water into and out of the fore and aft trim tanks. This keeps the total amount of ballast on the submarine constant, and hence keeps the buoyancy constant. I'd need to look into your circuit diagrams a bit more, but I think it would be possible to have the automatic actuator operate both ballast motors while still having manual control of the total volume of water in the ballast tanks.
Very impressive work! Your use of COTS circuit components is clever, and you did a very nice job shaping the PVC pipe for the hull, sail, planes, and rudder.
P.S. A final note about depth control. Ideally you would adjust your total ballast until you reach neutral buoyancy and then use the dive planes to drive the boat up or down. Flooding positive or negative would speed up the depth changes, but for an RC submarine that operates in only a few feet of water changing buoyancy is overkill for most vertical maneuvering - the exception being surfacing, of course.
Thanx My Friend
What's your qualifications sir
Seriously ?!? 😳🤯 I'm speechless man 😲👏👏👏👍👍👍
Wow! So much innovation in one project. I can't help but wonder if you kept track of it all in your head or if you worked out the design on paper then built the design results. Either way it's an impressive example of design. My greatest question though isn't related to the design or build but rather, "Where were all the Fish?"
Mesmerising ; guys creativity and build talents exceptional. Steering and prop. Brunel. Propulsion racket, so no stealth. Masterpiece !. Thanks, Dave.
You are my best inspiration, I respect your hardwork, thank you so much.
imagine if they had this tech back in the 80s ? they would have developed 1000 times faster than in the western world. well done !!!
I am Japanese.
I love the cool submarine you made after watching your video.
I would like to build that submarine and play with it in the lake, but I am very curious about how you made it.
I would like to know more about it.
I'm looking forward to seeing more of your creations.
From a fan of yours.
I am curious too. As a kid I had tried to.build simple submarines and motor boats. Now I want to build this cool submarine myself...
Amazing very❤👍❤👍
Some people can't even change a light in their house.
And this guy builds a self balancing underwater vehicle!
And Michael farade invented Electricity🤗
Looks beautiful! From what I've seen of it so far, and I've only watched half. Looks like a really fascinating build. One suggestion I would have with the Thousand bolts and nuts you got on there, is buy yourself some thread lock to keep them from spinning back off again. I am not sure if something is available like that from Indonesia some thick CA, also help those problems too although be aware it will flow up and down the spreads for quite a distance. I did notice that later on the new video you do start to use red thread lock. NEVER use red thread lock on anything you going to have loosen or adjust!
wow.. that is one hell of a DIY project ! hope to see more !!
Man! you blew my mind!!! ❤❤❤❤
Dear Sir,
I am first time watching this type of video. (Miracle of work compare to military).
Regards
RAMAN
অনেক সুন্দর ভিডিও।
Impressive work! Using servo motors and switches as an alternative motor driver is pretty clever! Keep up the good work. Cheers mate. Greetings from the Philippines
If only kids were inspired by creative genius like this instead of "influencers".
डढडढढचचढढछ
คนไทยทูกใจสิ่งนี้ :)
✨👍
Dari Indonesia ikut menyaksikan 👍👍👍
The sub merin is awsome . I hope that you have 1 m subscriber in future .😇😇😇
Best ever RC project i have seen
Nothing to say brother..amazing , subscribed your channel, yes you need to get more attention genius!! I am sure you will.. ❤️👏👏👏
You're gay, you said nothing but you've type comments in youtube
Meine Hochachtung ! Ein Idee exzellent umgesetzt.
Guess DIY Perks got some inspiration here...
DIY Perks seemed to have just made a very similar submarine, I can't help feeling that he was "inspired" by this wonderful project, but he didn't mention you at all.
exactly
Some people are so talented,gifted even?
Components
00. Idea
01. Creativity
02. SKILLS
03. SKILLS
04. SKILLS
05. Patience
1. 10 syringe
2. 2 gear moter
3. 555 moter
4. 5 Sg90 servo moter
5. 10 limit switch
6. Arduino uno board
7. Motion sensor mpu6050
8. 1 6000mAH Lipo Battery
9. flysky transmitter and receiver
10. 4'' Pvc pipe And two endcap
11. Aluminium plate
12. 8mm Thread bar
13. Gasket glue
Thanks
I am from srilanka and I love inda 🇱🇰🇮🇳❤️❤️
Wow😍😍😍😍
You are a true engineer
This channel deserves lot more encouragement👏👏👏
All the best🥰
Everything was perfect sir didn't enjoy without camera
I wonder, does it remain steerable when submersed? How deep can it go while maintaining RF communications? I know that water blocks any RF signal, so that's why I'm asking. Anyway, this is a 10/10. Congratulations! Thank you.
Congratulation for this job 💔💔💔
Thank you 😉
Great work brother 🙌🙌 In India there are no such tools and available as compared to foreign countries... Still you did that thing perfectly... All the best for your future projects
Is he from India?
無得頂！好嘢！😄👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Wow DIY PERKS used your design !!!
Супер тяжёлая модель получилась, а идея 💡 огонь
The only lack missile launcher and shoots for real, perfect♥️ Next, there will be a camera to connect to the phone. Built-in underwater light I want to see help develop from now on
คนไทยๆ555
@@phunatthadit9737 5555
Epic RC Submarine, count me in...
Felicidades, es un buen ejemplo.
250 sentadillas son unos X.Xxlovezzz.Uno muchas y un buen ejercicio.
5:25 -Se deja ver que hay muy buenos resultados- 😍👍
Saludos desde la Cd.. de world 🌹😉💖
los mortales abian apreciado tan hermosa mujer 5P8d
ตอนอยู่ในน้ำนึกว่าปลาช่อน 🤣
เจ๋งดีครับ ความคิดสร้างสรรค์มาก
ARCHITECT LIKE !! Thankyou
good job brother 👍
salam kenal dari kami suka mancing cirebon 🤝❤️🇮🇩👍
well done bro. appreciate the patience and dedication it takes to complete such a big project! amazing work!!
you know what this needs ???
a few more ADDS,
never STOP loving,,xxxxx
Deserves 1m views
it's so smart to make it
The quality of this video deserves much more recognition. Amazing quality and definitely is giving those much bigger channels (no offense) a run for their money! Keep up the great work!
Ковитация винта вашей подлотки велика! Ее сразу обнаружит враг😂😂😂👍
RIP SUBMARINE NANGGALA 402
#PRAY INDONESIA
An unfortunate incident
You truely live up to your channel name, and I love it.
what an amazing engineer you are😍 superb .cheers from India.👍🤝
Very advanced training and Sharp mind. And all work Mind blowing up. Bhai so thank you.
Awesome stuff, maybe you can give some light for swamp dive 😁
jika kapal selam ini dilengkapi dengan kamera dan baterai yg lebih besar,serta jangkauan remote control yg lbh jauh,its perfect to be real undersea drone. Amazing
WOW!!!! HAHA AMISGZING SUBMARINE HIHI... SHOUT OUT SR
I propose you as Minister of Innovation in your country. 👍
Great Video! Love the submarine!
That is some amazing DIY engineering! especially the rudder and dive surfaces bell cranks!
💯% amazing
Really nice! Good work!
But can’t understand: why you use servo&relay to change direction of rotation of the motor. If you use Arduino, driver for motor will be better
Me parece un proyecto magnífico, que podrían poner los planos para construirlo, gracias
Clever!....this is way off-the-chart toys!.
Shroud around the propeller would greatly increase its movement
awesome project, just curious, how does it not lose the RC signal when it submerges? and how deep can it go before losing the signal actually?
Very cool job. I'm not sure I'd have drilled into the drive motor, but it seems to work. I'd probably use silicone or marine adhesive to hold the motor. Very imaginative source for the shaft seal for the motor.
Since he used an arduino anyway, I wonder if it wouldn't have been easier to use that and a relay shield or motor controller to directly drive the ballast tank motors rather than all the servos and switches.
My nitpicks aside, this is a really nice project. Imagine what he could do with a 3D printer in his tool collection. ;^)
Well I am just impressed in many ways since someone just build what I try wanna build when I kids👍👍...keep it up the way u thinking about balancing and make submarine goes up and down is just mind explode for me🔥
Super bro. I think ur the best engineer. All the best keep going.
My friend this is fantastic, brilliant! An excellent example of good engineering with simple materials at hand. I wonder how much time did it take this project from planning to execution.
Keep up your superb work man!
Greetings from Argentina.
1 month
@@creativemind6579 ❤️
Very Creative Mind🧏♂️
pray for Indonesian submarine 🇮🇩 K.R.I Nanggala, which has lost contact since 22 April 2021 until now. I hope all crew can be found safely
An unfortunate incident
They already know that all crew is dead and it broke in three parts, why post this days after they found it?
Actualy the kru in K.R.I Nanggal 402 already dead before 24 April 2021 because the submarine has touch 821m and in 821m the submarine will be broken in tree part
It's really beautiful project
Бойтесь, чтоб этот шедевр возле ваших берегов не всплыл
P donkey experiment
I am a fan of you And i am from India
Que trabalho fantástico!!!
这不是工作，人家自己造着玩的
Your making process is satisfied 😏
R.I.P Nanggala 402 🇮🇩 😢
love from bangladesh 🇧🇩🇧🇩🇧🇩
#PrayForKriNanggala 🥀💔
Congratulations. Great work. You can produce more nice rc submarine. Continue try to more nice and nice.
PARA
BÉNS ✌️✌️✌️