Thanks for the tutorial sir its a great help to us. I noticed a nice numbering plan in the extensions because it makes them easy to memorize and your video is very organized
Rasad Bashareef. Disa and OGM are normally recorded from port 1 on the system, which would normally be the operators extension. ** and *# are also used at this port. To change any of these options you nedd to re program in the system "Class of service setting" recording features and funnctions are enabled under the Manager Tab within the Class of service settings.
Parus Abhi, Call deatils are collected by using a telnet program and connecting to the PBX on poert 2300. The Data output is Raw Ascii, so you would need a third party softwareto analyse the DATA.
thanks for the video. i would like to ask how to set 3 trunklines and I didnt get the concept of shading of the cell in the blocking calls. could you explain?
hi sir narith, i am studying and wanted to be more well-versed with this model ns300, may you please share with me your .ppt so that I can have my self-phased training..Thanks a lot....
Thanks for the video How to activate DISA and record OGM ? I have KX-DT333, by pressing ** or *# it doesn't open programming mode to program time and others. always refused
Hello Sir, I am working in an Educational Institute. We have Panasonic NS300 PBX. We have done All Programming, but Two Requirements are still Pending. Our Institute Requires Music on Hold for Landline Call or Line Calls. Now the Hold Music is Default Music which is Given by Panasonic. But We want to Set Our Own Hold Music for Line Calls/Landline Calls, Please Tell Me that and One More Thing is We can't Get Caller ID of Line Call in Panasonic Display Phone. Please Tell Setting for These Requirement. I will be very Thankful to You... Aashu Saini
Thanks for the tutorial sir its a great help to us. I noticed a nice numbering plan in the extensions because it makes them easy to memorize and your video is very organized
Good job❤ thank you from srilanka
Thanks for the video. i need to watch a video with audio explanation. Is there any video you made with audio??
Rasad Bashareef. Disa and OGM are normally recorded from port 1 on the system, which would normally be the operators extension. ** and *# are also used at this port. To change any of these options you nedd to re program in the system "Class of service setting" recording features and funnctions are enabled under the Manager Tab within the Class of service settings.
Parus Abhi, Call deatils are collected by using a telnet program and connecting to the PBX on poert 2300. The Data output is Raw Ascii, so you would need a third party softwareto analyse the DATA.
Thanks for this effort
Do you have the new update?
KX-NS300 PFM PR_009_000_130
Dear Sir, How can we program Incoming Calls to Ring at Multiple Extensions, and Delayed Ringing
thanks for the video. i would like to ask how to set 3 trunklines and I didnt get the concept of shading of the cell in the blocking calls. could you explain?
Can you please instruct, how to backup and restore in KX-NS300? There is USB port also, what is the purpose of that?
overcome phone hunting that fails, previously can be used 4 telephone numbers to 1, and become 4 lines, when there is a shared phone can queue
Hello, can we generate basic call billing reports / CDR / Call detail reporst from NS300 directly or do we need a external phone billing software?
GREAT VIDEO..
How can I connect outside calls in my PBX?
Hi very nice video i have 1 question i want to transfer all out call to mobile number out of company
Sir, good day. We would like to ask how to configure kx ns300 for incoming call to ring in all telephones and pick it up. Thank you.
Does NS300 can connect to printer as TDA100 .(My customer don't want run on PC)
Good Day Sir Narith Heang, how can I set unattended reception trunkline to ring other local number after 4 rings?
hi sir narith, i am studying and wanted to be more well-versed with this model ns300, may you please share with me your .ppt so that I can have my self-phased training..Thanks a lot....
Thanks for the video
How to activate DISA and record OGM ?
I have KX-DT333, by pressing ** or *# it doesn't open programming mode to program time and others. always refused
Hi brother Panasonic kx-t7705x support extension name on screen ?
Dear Sir. How to set call forwarding in NS300?
Hi I have problems with I want to use extensions 555 why not and how to enable it
May I give schematic from Provider to NS300 😊
Hi- how can i change the local numbers? (ex; Local 801, 712, 620.. etc
Sir, how can I configure the outside call ?
How to add existing IP phone kx-hdv130 to Panasonic kt-ns-300 after resting the phone plz guide me
How to installed central Panasonic d100d from computer thankes
Thanks Sir, please upload panasonic pabx slide training and share for us.
yes sure ..please drop me your email here
please give me the slide and documentation to seraphienz@yahoo.com
thanks before :)
@@narithheang4892 Please send email for PABX slide training to triplek.av@gmail.com. Thanks sir :)
@@narithheang4892 please give me tha slide and ducumentation to peclub5@gmail.com thanks before :)
how to disable std facility for some numbers ?
how can i forgot my user id & password if we forgot our intercom will effect or not
what does data mode mean in this system
Hello everyone, How to transfer original caller id when using "attended transfer to an extension"?
I can't change extension number. How to change extension number?
Hello! is it possible to set up this ns300 together with Asterisk on Linux server?
Thank you solution same TDA version
dear very nice video can you upload how to take back up and e it on new system.later restore it ...santosh
how can it deal emergency number N300
Hello Sir, I am working in an Educational Institute. We have Panasonic NS300 PBX. We have done All Programming, but Two Requirements are still Pending. Our Institute Requires Music on Hold for Landline Call or Line Calls. Now the Hold Music is Default Music which is Given by Panasonic. But We want to Set Our Own Hold Music for Line Calls/Landline Calls, Please Tell Me that and One More Thing is We can't Get Caller ID of Line Call in Panasonic Display Phone. Please Tell Setting for These Requirement. I will be very Thankful to You...
Aashu Saini
how to add expansion module 320
How to disable telnet and open ports?
Please send copy programming manual.thanks
Hello brother if I forgot IP address how can I find it. Thank
thanx
you're Welcome
can you set up this system remotely? can you set it up for me? what would be your charges?
It is very easy to setup system remotely.
I can set up and maintenance remotely. But I need get some information for remotely control. U can contact me by nogokowo@gmail.com.
how to make a call from an ext ?
Hello brother if I want to change call waiting Town
Is there a way to know the IP address of the unit?
please send a copy of programming manual in ppt..thanks
Thanks upload the Color coding
your welcome
why not sound?
there is computer mix problem dear .. that's
why no sound
If you speak is better like this.