Thanks for watching ! Please support this channel by clicking the Like, Subscribe, and SUPER THANKS buttons. Your support will help me to continue and improve my videos 👍
My mother drives this car and had the same problem! I followed your video exactly. And it actually worked straight away! I thank you so much! Who knows how long it would have taken a mechanic to find this problem. Saved nerves and money, thanks to you!👍👍
Why have I only just found your youtube channel? I have been hornless for 4 years with this car - I have a month off work and loads of stuff to do to the car now, thanks to you! Magic.
Thank you so much for the Amazing tutorial! The mechanic I went to said the problem was probably a broken spiral or something like that and it would cost like 800€ for the spare part and the work needed. Watched your video and followed the instructions and now my horn works again! And it it was completely free! Such a simple fix and it took almost no time at all.
Habe gleiches Problem bis heute, aber toleranten TÜV Prüfer...."Die Hupe sollte man einmal überprüfen! " ...aber immer Plakette erhalten. Hatte nie Ahnung, wie ich das Problem lösen könnte. Danke für dieses ausführliche Video!
Shout-out to this tutorial, this is marvelous! I didn't had horn for 2 years, mechanics don't want to deal with this because they can't charge this, it's a small thing but you are my savior, thanks to the moon and back!
This video saved my days and my ass everytime I needed to blow the horn. A tip for whoever struggles with reaching to the (-) pole of the battery: I fixed this problem with a friend of mine who is an electrician, he suggested to remove the (+) pole (because it was easier to reach) and it worked real good. Only thing to notice is the reset of date and time on the screen, all the other infos are saved. Thanks a lot for the community service, really saving our pockets' weights!
(-) pole is also more complicated for my car, because it doesn't have a clamp like (+) does. I'm not sure if it is the same which one you remove, especialy because the video says it's the earth wire connector? I mean, it should be the same, but I don't know.
Epic! Had a dry few hours this afternoon and followed this advice, and what do you know... I have a horn again!! The white airbag wires were little tighter than in your video, so I basically used masking tape to tape the airbag to the upper wheel to give me hands free access to the wire and connection. Worked a treat. Horn now working after 4 years! Not once has it been tested on an MOT... so I consider myself lucky! Thank you, you're an absolute star! 2003 307 SW 110 HDI.
Brilliant video, I’ve just bought a 307sw and the horn wasn’t working (had a fresh MOT!!!), n/s wheel arch liner was loose so someone had obviously checked the horn and fuse box then given up. Took me 10 minutes after watching your video to fix it, would never have known this was the problem.👍
Thank you, great video, very well presented. I have a 2009 Berlingo with this problem, I have to hit the horn area hard a few times to get the horn to start working. It will work after that for a day or so then stop working again. I've been wanting to take off the steering cover to take a look at what is going on but I have been apprehensive about the air bag. I will give this a go using your instructions, hopefully it will go straight forward. Further note, I had a garage try to fix this a few years back, and they replaced the squib stating it was faulty, but the problem remained. A couple hundred quid down the drain using the garage.
The garage servicing my 2003 Pug Partner couldn't fix the horn for it's MOT. Nervously followed your video. (Cleaned up the contact instead of screwing it in). Horn works. Cheers! 👍
Worked a treat for me this thank you! That said, the copper connector needed sanding but the wire for me was snapped off it! Thankfully, soldering the wire to the connector worked 👌
A careless mechanic cut the white wire for the airbag, the horn stopped working and another claimed it's because of that. Thanks to this video, now I know which is actually connected to the horn and airbag
Thanks for the video. Had the same issue with a 206. Checked the fuse ,took out the horn and put 12v on it direct and it was working . I saw your video and it was a similar issue . I cleaned up a spade connector under the airbag and squeezed it a bit with a pliers . Job done . For anyone doing it on a 206 there's one clip to be pushed directly under the steering wheel.
This fix worked for me. The bit was getting the centre/horn button bit off. I found putting it back in reverse order helped, ie side clips first then bottom clip last
Ça marche 👌 ça fait des années que je me passais de mon Klaxon ... je vous laisse imaginer la frustration dans certaines situations 😬😅 alors que la manip est toute simple pour résoudre ce problème ! Merci 🙏
No annoying background music was nice, but, the silence made it seem like the airbag was gonna go off any moment and it was just building up the suspense the entire video monkaS
Worked like a charm. Cant believe I was hornless for years due simple contact issue... Good thing I did not listen to advice from service when the issue first came up, to replace com2000.
Muchas gracias por este video, ya estaba desesperado por que no funcionaba, y en el taller me ubiese costado una pasta, lo hice tal cual el video y funciona como el primer día. Gran trabajo!
Hello my brother. Please why i should reconnect the battery with door driver open and switch on the ignition outside the car please. I have this problem in my car. And im scary
Thanks for your informative video, very well done and informative. Actually on my part I have the inverse problem. The horn works randomly without me touching it, especially when I turn the wheel. A few times I almost had problems with the drivers around me, I'm so afraid it happens while I'm driving behind or next to a police car. Do you think that I could use the same technique on my horn. Thanks in advance
You're welcome. I don't think it's the same issue. It sounds like there could be a short circuit in the wiring somewhere or a faulty relay. If it stays on constantly, you may need to remove the horn fuse temporarily until you fix the issue. You can find the fuses on this link: fuse-box.info/peugeot/peugeot-307-2002-2008-fuses
@@screwsnutsandbolts Actually I admit I watched it 3 times, I'm a bit slow like that but hey I did it, after cleaning I added a piece of wood jammed in between the spade clip to force its sides outward, now i have a very strong contact. Thank You I couldn't have done it without you.
Fixed ! , it was a bit hard to remove the connector , my 307sw is second hand and the connector had a screw insert it !, probably the last owner or his mechanic put it in there ! ... anyhow now is working , thanks
Thanks for the video! I did it according to you and it only helped when I put the airback back in and plugged in the battery so I was driving a click in the steering wheel whenever I passed the center of the steering wheel, don't you know what it could be?
Lepo pojasnjeno detaljno svaka cast. Inace ne radi mi sirena na xsari vtr godinu dana i jace ! Kupio sam cak i novu sirenu probao opet nista. Proverio kablove da nije neki u prekidu slucajno medjutim sve je tu ok samo truba ne trubi. Moracu da otvaram volan sad nzm.ako iskljucim akumulator smem da ceprkam ili? Pozdrav iz Srbije Beograda
It is still not going damn, but you explanation is super where Can I find The fuse becouse I don't have the book....... I took them all out and could find a a bad one en under the hood. With kind greetings Oli
It's a lot of work. You have to take off the lower center part of the front fascia and then remove the center console, which involves disconnecting a passenger airbag sensor. To be honest, it would be easier to quit smoking ! :)
Just for your info some Peugeots have 2 torx srcews behind the steering wheel accessible through the small holes, no clamp in there!!! Looks to me that all with the horn function in the handle have those trorx screws holding the airbag in the steering-wheel . In fact those wheels look similar to this one, but the top of the airbag/steering-wheel is different. the airbag module (cover) bends over the steering-weel top in this model but those whit the screws have a foam like rubber that is part of the steering-wheel and a more flat airbag module, also minor wiring differences. My model has only 1 connector (orange) going from the spring clock behind the steering wheel towards the airbag module and no wires for the horn of course. You can damage this connector/wiring while poking in these holes trying to find the clamp!
Thanks for watching !
Please support this channel by clicking the Like, Subscribe, and SUPER THANKS buttons.
Your support will help me to continue and improve my videos 👍
My mother drives this car and had the same problem! I followed your video exactly. And it actually worked straight away! I thank you so much! Who knows how long it would have taken a mechanic to find this problem. Saved nerves and money, thanks to you!👍👍
You're very welcome, thanks for watching !
@@screwsnutsandbolts greetings from Germany! 🤝
So far better than all our french video for this ptoblem on this french car 😂👍🫶👏
Sorry if my english is bad, i don't use the translate.
Why have I only just found your youtube channel? I have been hornless for 4 years with this car - I have a month off work and loads of stuff to do to the car now, thanks to you! Magic.
Thank you :)
How have you managed to get through 4 years worth of MOT tests without the horn working?
@@snoopy10411You only need to put a little money on top of the standard price of MOT testing and they will stamp your MOT no problem :D
@@Bossix84depends who you know I guess 😂
Nice informative tutorial with no aggressive background music. Thanks!
You're very welcome. Thanks for watching ! :)
Thank you so much for the Amazing tutorial! The mechanic I went to said the problem was probably a broken spiral or something like that and it would cost like 800€ for the spare part and the work needed. Watched your video and followed the instructions and now my horn works again! And it it was completely free! Such a simple fix and it took almost no time at all.
You're very welcome, thanks for watching !
Habe gleiches Problem bis heute, aber toleranten TÜV Prüfer...."Die Hupe sollte man einmal überprüfen! " ...aber immer Plakette erhalten. Hatte nie Ahnung, wie ich das Problem lösen könnte. Danke für dieses ausführliche Video!
Shout-out to this tutorial, this is marvelous! I didn't had horn for 2 years, mechanics don't want to deal with this because they can't charge this, it's a small thing but you are my savior, thanks to the moon and back!
You're very welcome, thanks for watching !
This video saved my days and my ass everytime I needed to blow the horn. A tip for whoever struggles with reaching to the (-) pole of the battery: I fixed this problem with a friend of mine who is an electrician, he suggested to remove the (+) pole (because it was easier to reach) and it worked real good. Only thing to notice is the reset of date and time on the screen, all the other infos are saved.
Thanks a lot for the community service, really saving our pockets' weights!
(-) pole is also more complicated for my car, because it doesn't have a clamp like (+) does. I'm not sure if it is the same which one you remove, especialy because the video says it's the earth wire connector? I mean, it should be the same, but I don't know.
Awesome !!!!! electrician asked me 70 euros to fix the horn. Done in 5 minutes . Many thanks.
You're very welcome, thanks for watching !
Epic! Had a dry few hours this afternoon and followed this advice, and what do you know... I have a horn again!! The white airbag wires were little tighter than in your video, so I basically used masking tape to tape the airbag to the upper wheel to give me hands free access to the wire and connection. Worked a treat. Horn now working after 4 years! Not once has it been tested on an MOT... so I consider myself lucky! Thank you, you're an absolute star! 2003 307 SW 110 HDI.
You're very welcome ! :)
Ser gut hat bei meinem Wagen geklappt 😅 10 schterne für den Tipp vielen Dank
You're welcome, thanks for watching !
20 years without horn. Problem solved in 5 minutes! Thank you very much
You're welcome!
Brilliant video, I’ve just bought a 307sw and the horn wasn’t working (had a fresh MOT!!!), n/s wheel arch liner was loose so someone had obviously checked the horn and fuse box then given up. Took me 10 minutes after watching your video to fix it, would never have known this was the problem.👍
You're very welcome, thanks for watching !
Thank you, great video, very well presented. I have a 2009 Berlingo with this problem, I have to hit the horn area hard a few times to get the horn to start working. It will work after that for a day or so then stop working again. I've been wanting to take off the steering cover to take a look at what is going on but I have been apprehensive about the air bag. I will give this a go using your instructions, hopefully it will go straight forward. Further note, I had a garage try to fix this a few years back, and they replaced the squib stating it was faulty, but the problem remained. A couple hundred quid down the drain using the garage.
The garage servicing my 2003 Pug Partner couldn't fix the horn for it's MOT. Nervously followed your video. (Cleaned up the contact instead of screwing it in). Horn works. Cheers! 👍
You're very welcome, glad you got it sorted 👍
Thanks a lot dude. I was four years without a horn. Super easy and fast fix on my 307. God bless you 😃😄😄👍👍👍
You're very welcome, thanks for watching !
Worked a treat for me this thank you! That said, the copper connector needed sanding but the wire for me was snapped off it! Thankfully, soldering the wire to the connector worked 👌
Well done 👍
A careless mechanic cut the white wire for the airbag, the horn stopped working and another claimed it's because of that. Thanks to this video, now I know which is actually connected to the horn and airbag
Thanks for watching :)
Thanks for the video. Had the same issue with a 206. Checked the fuse ,took out the horn and put 12v on it direct and it was working . I saw your video and it was a similar issue . I cleaned up a spade connector under the airbag and squeezed it a bit with a pliers . Job done . For anyone doing it on a 206 there's one clip to be pushed directly under the steering wheel.
You're welcome, thanks for watching :)
Thanks good to know ..looks like I'll be having to do this on my 206
The perfect instructional video. You’ve earned a subscription.
Thank you ! 👍
Thanks to this video I fixed my car horn without paying a mechanic!! Thank you sir!!
You're welcome, thanks for watching :)
Dziś zrobiłem tak jak w przedstawionym filmie i klakson działa 💪👍
Very good 👍
Great video, thank you !
You're welcome, thanks for watching !
Very interesting tuto: clear, soothing and calm. many thanks in all languages of the world
You're very welcome, thanks for watching !
This fix worked for me. The bit was getting the centre/horn button bit off. I found putting it back in reverse order helped, ie side clips first then bottom clip last
Ça marche 👌 ça fait des années que je me passais de mon Klaxon ... je vous laisse imaginer la frustration dans certaines situations 😬😅 alors que la manip est toute simple pour résoudre ce problème ! Merci 🙏
You're very welcome, thanks for watching ! :)
Thanks a lot for this video... Had the same Problem on my 307 SW... Followed the steps shown here and its working again.
Thanks again.
You're welcome, thanks for watching ! :)
Tausenmal Dankeschön Habe es genauso gemacht und es hat sehr gutfunktioniert. Ich fahre auch dieselbe Auto.Danke nochmals.
You're welcome !. Thanks for watching !
No annoying background music was nice, but, the silence made it seem like the airbag was gonna go off any moment and it was just building up the suspense the entire video
monkaS
Worked like a charm.
Cant believe I was hornless for years due simple contact issue...
Good thing I did not listen to advice from service when the issue first came up, to replace com2000.
Thanks for watching ! :)
@@screwsnutsandbolts No, no, thank you for sharing the knowledge. Saving $$$ on maintenance is always nice ;)
Very Big thanks from France and Algéria, 👍👍👍
You're very welcome !
Thank you, you advice fixed my horn problem, May God Bless you
You're very welcome, thank you
A very good video. Very clear and easy to follow. Thanks man.
You're welcome, thanks for watching !
Spot on this, all done, horn working, very happy. Thanks
You're very welcome, thanks for watching !
Muchas gracias por este video, ya estaba desesperado por que no funcionaba, y en el taller me ubiese costado una pasta, lo hice tal cual el video y funciona como el primer día.
Gran trabajo!
You are very welcome. Thank you for watching !
Thank you. The video above worked on my citroen berlingo. 👍
Excellent !. Thanks for watching 👍
Thanks. Apart from slightly different removal of the airbag, this was useful to fix the issue on my 2008 berlingo. Cheers 👍
Thanks for watching :)
Hi Toy, I have a Berlingo 2008 too. Was it difficult to do it? Any issue with the Airbag? I am freaking out it will explode....
Thinking of having a go at my 2007 Berlingo so good to hear it's a winner
it was so much easier than i thought it would be. Thank you for the great video. Followed instructions and it worked!
You're very welcome, thanks for watching !
Demostacion rapida,efectiva y eficas.gracias por compartir
You're very welcome, thanks for watching !
Funcionó gracias,thanks!
You're welcome, thanks for watching !
Thank you very much. Watched your video and gathered some strengt to try fix kt myself, works like charm
Excellent, well done !
@@screwsnutsandbolts do you have some video/instructions for fan/blower? Just stoped working, like he didnt have strengt to work.. automatic climate
@@Bodika. I don't, sorry about that.
Tanks for this vidéo ! My Horn is OK now !
You're welcome !
60 yeara worhout horn! Fixed in 6 seconds. Thank you!
Very informative. Thank you very much! Informative warnings help me lowering unsure feelings. 👏👍😄
Thanks for watching !
Tack mannen du är bäst 🇸🇪 jag 🦧
Thanks for watching !
Your video save my Life broo thank you very much good blees you 🙌
Thanks for watching !
I thank you so much Mr. Your explication is very good
You're welcome, thanks for watching !
Hello my brother. Please why i should reconnect the battery with door driver open and switch on the ignition outside the car please. I have this problem in my car. And im scary
It's just a precaution, in case the airbag deploys when the power is reconnected.
Top marks, one excellent video
Thank you !
Thanks for your informative video, very well done and informative.
Actually on my part I have the inverse problem. The horn works randomly without me touching it, especially when I turn the wheel.
A few times I almost had problems with the drivers around me, I'm so afraid it happens while I'm driving behind or next to a police car.
Do you think that I could use the same technique on my horn.
Thanks in advance
You're welcome. I don't think it's the same issue. It sounds like there could be a short circuit in the wiring somewhere or a faulty relay. If it stays on constantly, you may need to remove the horn fuse temporarily until you fix the issue. You can find the fuses on this link: fuse-box.info/peugeot/peugeot-307-2002-2008-fuses
Merci beaucoup pour cette vidéo grâce à vous mon klaxon fonctionne de nouveau 👍🙂.
You're welcome, thanks for watching ! 👍
Thx very very much bro.
It's 👌
Really good tuto👍😉
You're very welcome, thanks for watching !
Great job sir. 100 % working 😊.
Thanks for watching !
So informative , thank you so much
You're very welcome !
Excelente.. saludos desde argentina
Thank you !
Thank you so much. Worked a treat. 😊
You're welcome !
Superb video, Thank You for your effort to help.
You're very welcome. Thanks for watching !
@@screwsnutsandbolts Actually I admit I watched it 3 times, I'm a bit slow like that but hey I did it, after cleaning I added a piece of wood jammed in between the spade clip to force its sides outward, now i have a very strong contact.
Thank You I couldn't have done it without you.
@@themilktrayman7369 Well done ! :)
Good 👍
Thanks !
Comprei uma recente é seu vídeo foi o melhor que encontrei, muito obrigado já sou seu escrito!
Thanks for watching !
@@screwsnutsandbolts olhei aqui amigo, porém o meu é uma partner 2010 você tem algum vídeo explicando?
Great stuff mine is now working a treat , thanks 😊
You're very welcome, glad it helped ! :)
Thank you very much man for video ❤😊
You're welcome !
Muchas gracias amigo solucione mi problema de bocina
You're very welcome 👍
Big up from Scotland and Will it work?on Citroën berlingo multispace 2010 😊
Thanks, I haven't worked on one so I can't be sure, sorry :)
Very well explained,especially the safety aspect.I think the fault is probably common to other makes of cars too.Thanks for sharing.M
Thanks. Yeah I wouldn't be surprised. It's a strange way to connect it !
worked for me! 🙂
Thanks for watching !
worked for me on 307 sw 2003 diddnt see anything wrong stil try it and it worked from nothing to working completley thanks for the vid
You're welcome ! 👍
Thanks a Lot my friend !!!
You're welcome 👍
Fixed ! , it was a bit hard to remove the connector , my 307sw is second hand and the connector had a screw insert it !, probably the last owner or his mechanic put it in there ! ... anyhow now is working , thanks
You're welcome, thanks for watching !
Thanks for the video! I did it according to you and it only helped when I put the airback back in and plugged in the battery so I was driving a click in the steering wheel whenever I passed the center of the steering wheel, don't you know what it could be?
You're welcome. It sounds like the sound could be coming from the clock spring: ua-cam.com/video/KaaJrfeV918/v-deo.html
Great video. Thanks for sharing
You're very welcome, thanks for watching !
Oh thank you, a very good instruction🙏
Thanks for watching !
Thank you bro , it really worked :)) made my day
You're very welcome, thanks for watching !
I hope this works for me
I will try it asap
Thanks bro 🙏
You're welcome !
Great video.
Thank you !
Muy bueno gracias por el video, lo voy a hacer ahora. Por favor put some oil in the crankcase!!
Thanks !. The oil level is good but the oil level sensor is faulty. Sometimes it works and sometimes it doesn't :)
Another awesome video! Thank you! :)
Thanks for watching !
Tank you this vídeo hekp me to fix my 307 horn fix.
You're welcome !
Bravo majstore
Thanks for watching !
esta bien esplicado para llegar a desmontar,ok
Thank you !
Thank you so much for your help
God bless you brother
You're very welcome !
Awesome video! Thank you
You're welcome, thanks for watching !
Tenia el mismo problema... Y funciono perfecto 👍👍👍
Thanks for watching !
thank you verycvery very very much 👍👍👍👍👍👍👍👍
You're very welcome, thanks for watching !
Lepo pojasnjeno detaljno svaka cast. Inace ne radi mi sirena na xsari vtr godinu dana i jace ! Kupio sam cak i novu sirenu probao opet nista. Proverio kablove da nije neki u prekidu slucajno medjutim sve je tu ok samo truba ne trubi. Moracu da otvaram volan sad nzm.ako iskljucim akumulator smem da ceprkam ili? Pozdrav iz Srbije Beograda
Thank you, Brilliant.
You're welcome, thanks for watching :)
Thank you for explaining muchos respect 👌🏼👌🏼
Thanks for watching ! :)
It is still not going damn, but you explanation is super where Can I find The fuse becouse I don't have the book....... I took them all out and could find a a bad one en under the hood. With kind greetings Oli
@@thevikingoli8847 Is it the same model 307 as the one in the video ?
@@thevikingoli8847 Check this link here:
fusesdiagram.com/peugeot/fuses-and-relay-peugeot-307.html
@@screwsnutsandbolts your to nice, thank you may Odin be by your side. 👌🏼👍🏼
Thank you so much ...
You're welcome !
Buen vídeo me sirvió de mucho y volvió a funcionar mi claxon
Thank you so much .
Can you show us how to change the cigaret ligther ???
It's a lot of work. You have to take off the lower center part of the front fascia and then remove the center console, which involves disconnecting a passenger airbag sensor. To be honest, it would be easier to quit smoking ! :)
@@screwsnutsandbolts thanks you
Buen turorial muy claro gracias por la ayuda.
You are very welcome, thanks for watching !
Just for your info some Peugeots have 2 torx srcews behind the steering wheel accessible through the small holes, no clamp in there!!! Looks to me that all with the horn function in the handle have those trorx screws holding the airbag in the steering-wheel . In fact those wheels look similar to this one, but the top of the airbag/steering-wheel is different. the airbag module (cover) bends over the steering-weel top in this model but those whit the screws have a foam like rubber that is part of the steering-wheel and a more flat airbag module, also minor wiring differences. My model has only 1 connector (orange) going from the spring clock behind the steering wheel towards the airbag module and no wires for the horn of course. You can damage this connector/wiring while poking in these holes trying to find the clamp!
Thanks for the info. I did state in the description that this fix is for the 2001-2008 peugeot 307 model only
It works ❤❤❤
is this similar on a 2004 Peugeot 406? or is there a big difference from the 307?
I haven't worked on a 406 so I can't be sure, sorry.
Thanks i will try that
Thanks
Same think for peugeot 208 ???
No it's probably different in a 208
My car horn a 208 sometimes work sometimes not.
I don't know what to do to fix it
There is no earth wire in 208 horn
Hello Thanks you so much ☺
You're very welcome !
ياأخي بارك الله فيك هذي مدا ونا نحاول كيفاه نفتحا
me ha funcionado muchas gracias,👍
Thanks for watching !
The best video thanks!!!
Thank you !
Thanks you merci !!!
You are welcome!