@@striffI’m about to under go the servo delete any advice on how to get it out, what tools etc? That one bolt that’s behind it with like a 1/2in of space between the bolt head and the engine casing is going to be fun trying to get out
@@CorBor69 To be honest cannot remember. Just I know one part was a bit trick, but I do have large tool kit so wasn't short of any tools. But if you search speed triple 1200 rs healtech in Google or UA-cam there's plenty of videos on to do this. Leiker also has instructions when you buy their exhaust to the servo eliminator, so to Race Fit, which I'm now using their dual under seat exhaust.
Hi there and happy Friday! Would you mind if I ask a question? May I ask how you re-mounted the lower aluminum OEM ehlxhaut shield? I also removed the big black silencer box and that had the one single mounting point for that panel. I went with the Prorace low mounted shorty....Leiker has been out of stock forever. Thank you so much!!
@@striff thanks. No worries, I know how to mount the panel. Was asking how you mounted the one and only place that has a bolt since the black box is gone so is the mounting bracket. No worries, have a great weekend.
Great video, thanks for sharing! May I ask....did you have to install the Healteck when you removed the exhaust valve and all that mess or just plug and play? Did you have to re-map? Did you get any error codes or warning lights? Thank you for the patience and taking time to respond!
@@dblhelx the exhaust is getting the exhaust box and back so the valve is removed. I got a Healtech servo eliminator. Lot of junk off the bike. Yes I also got a Dyno tune / remap, bike was running lean. Did ride it for a month before that.
Awesome bike
Considering this exhaust for my 1200RR. Did they supply hardware and electronics to take care of the servo in the stock exhaust?
No they didn't, but easy to get and do. I bought a Healtech eliminator, plug and play.
@@striffI’m about to under go the servo delete any advice on how to get it out, what tools etc? That one bolt that’s behind it with like a 1/2in of space between the bolt head and the engine casing is going to be fun trying to get out
@@CorBor69 To be honest cannot remember. Just I know one part was a bit trick, but I do have large tool kit so wasn't short of any tools. But if you search speed triple 1200 rs healtech in Google or UA-cam there's plenty of videos on to do this.
Leiker also has instructions when you buy their exhaust to the servo eliminator, so to Race Fit, which I'm now using their dual under seat exhaust.
Hi there and happy Friday!
Would you mind if I ask a question?
May I ask how you re-mounted the lower aluminum OEM ehlxhaut shield? I also removed the big black silencer box and that had the one single mounting point for that panel. I went with the Prorace low mounted shorty....Leiker has been out of stock forever.
Thank you so much!!
It has three mounting points.
Two towards the front, from memory are slide on fitting.
@@striff thanks. No worries, I know how to mount the panel. Was asking how you mounted the one and only place that has a bolt since the black box is gone so is the mounting bracket. No worries, have a great weekend.
beautiful!! how did you get the different colored motorcycle stickers?
They were included.
@@striff those of the motorcycle, not those of the exhaust
@@DanielLopez-py6nq ahh right.
I made them myself
Great video, thanks for sharing!
May I ask....did you have to install the Healteck when you removed the exhaust valve and all that mess or just plug and play? Did you have to re-map? Did you get any error codes or warning lights?
Thank you for the patience and taking time to respond!
@@dblhelx the exhaust is getting the exhaust box and back so the valve is removed. I got a Healtech servo eliminator. Lot of junk off the bike.
Yes I also got a Dyno tune / remap, bike was running lean. Did ride it for a month before that.
Please share the link where you got this exhaust thanks
leiker.co.uk/
Je comprend pas l'anglais mais ta moto est tres belle