Making plasma
Вставка
- Опубліковано 31 сер 2016
- Creating plasma in a simple vacuum chamber made of a glass cylinder and 2 aluminum disks. The high voltage power supply was arranged with a microwave transformer, variac, capacitor and a diode.
Next step is to try to add a magnetron sputter gun to deposit metal on glass. - Наука та технологія
this is the easiest and best plasma chamber design!!
it even got the heat sink side ready.
Awesome!!
This is very cool. I think it is one of the clearest examples I've seen thanks! Also my favourite bit is the croc clip to spanner for the +ive connection! Typical engineer!!!!!!! :)
Very, very cool! Thanks for the video.
I have used everything from barbeque propane tanks to 1 gallon pickle jars. Your glass cylinder and simple geometric aluminum disks make a beautiful chamber.
Just a tip. A long and narrow vacuum line is bad for the pumping speed. I would increase the diameter of the piping.
But thumbs up for a very stylish looking chamber! :)
That is very true! besides tubing is not that expensive and 130 militorr is still fairly high pressure for a vacuum. I like to get under 10 militorr. Also flare fittings are the worst, swagelock and others similar are much better.
Yip
Its a pretty cool project and while it has been 2 years, have you made any improvements? I was particularly wondering if there is an inexpensive high frequency power supply that can be bought to achieve this. Something like a ZVS flyback transformer?
Hello, very nice work! may I ask you where is possible buy your glass cylinder? ..and why glass instead of polycarbnate? Thank you very much for any advice
Now all u have to do is find out a way to manipulate a magnetic field and boom you have a light saber
It's called a magnet
hi, i didnt see a magnetron, is the voltage directly connected to the wrench on top ? then the ionization of the aluminum? in my design im using silicon or silicon dioxide with a magnetron . i modified a sputtering chamber into a rocket engine . with wave pulses of electric fields to create pressure on a high density plasma field . trying to see if it can be done now outside the microwave range . thanks for the video
where did you get the glass cylinder? approximate dimensions and thickness if you don't mind. Thanks!
can you explain more about your converter?
Great simple video thank you! Hey what kind of glass did you use?
Awesome video
im making a hho generator and i want to know if i can take it to the next step and trying plasmatising the water to splice the water faster then traditional metals
Hmm do you get plasma if you ground the other side of the vacuum tube to a real earth connection (not just a wall plug) and the put positive high voltage on the top?
Which CFM vacuum pump do we need for a specific volume? Is there any relation? Vacuum needed is from 0.3-0.5mbar.
Hi, I'm a research student.Could you please tell me which material you have used for the cylinder.. Is it normal glass or quartz glass, and how thick it is so that its not breaking due to the pressure diffrrence created by the vacuum pump.
did you use aluminium to cover your plasma chamber or other? why?
I am also working on cold plasma . So you will suggest to me which are the apparatus we have used
The toaru series taught me well
Haha I watched it too
PLEASE TEL ME WHAT THE PRESURE AND VOLTAGE WERE ??
What kind of glass are you using? Im asking because it ses your quite healthy in the prsence of a shitload of uv
important question here what pressure in pascals did you need to go down to to create the vacuum for your plasma?
In order to generate plasma, you'll need a combination of low pressure vacuum and high voltage. If you can have the voltage high enough, then no need to go lower pressure.
Hello, i just watch this video and it's very amazing. I interest to see more about that plasma. Are you use reactive species for produce the plasma ? or which plasma could be generated from (mechanism of plasma produced)?
I wish you could explain to me, thank you very much before
Wooooooow this video is soooo amazing
Did the temperature increases once plasma phase is reached? How hot did it get?
Can you give more details about electronic connections?
What gasket are you using between the aluminum and glass?
qual a pressao, pra obter se o plasma a 500v de ddp?
thank you you did a great job
Still the best setup, i will build one soon..
Its a long mind breaking road out of hell.
I want to try it with salt water too
very good video! would you consider releasing a component list?
why do you vaccum before creating plasma ?
What happens if you put a woodchip inside of the glass?
You might want to try needles or something with tiny points in top and bottom plates.
Does the plasma apply a force on anything?.
how low must this be to work??
Gostei do seu projeto! Esto montando uma câmara de vacuum também. Já tenho uma belo jar e quero fazer o plasma para limpar o interior da câmara antes de evaporar o metal.
Obrigado por postar este vídeo esclarecedor!
Fascinating
I would’ve appreciated if you went into the circuit schematic more. Where is the diode and capacitor connected to? Why are they there?
look up "voltage doubler"
Hi, did you find any answer?
Установка нагревается при работе? колба и электроды теплые? Какой ток?
¿could you provide us please with the time of pumping until you got the glow? also the pressure value when you got the glow ¿ finally how much the experiment lasted? ¿did the intensity of the glow changed after long time?
i dont understand ?? you need electromagnet wave to make this work?
How did u heat the air in the vacuum to make plasma. Did u use vacuum pump to make the air self heated it?
He does not heat the air to create plasma, there are several ways of creating plasma. Try searching for "Thought Emporium"'s video about plasma, he explains it very well.
Basically he uses very high voltage to flow Electrons from the bottom negative plate, to the top positive plate and that creates the plasma we see; it needs to happen in a vacuum because the Air will get in the way of the electrons and prevent the plasma from forming.
How much pressure have you exerted here
If you add a little oxygen flow the plasma becomes pink and is useful for molecular cleaning of plastics
Where did you find this glass?
My name is Kevin from African Kenya and I would like to ask you the role of this plasma, is it useful or it is for fan only?
Hello mate,love the simplicity of your work.Can you tell me in the reply or on another video the kind of gas or gases you find best for lowest voltage response,thank you.
Use of freons would be nice and if necessary use argon.. it's cheap.
cool bro! you need to electrically isolate vaccuum pump from plasma chamber with heavy plastic hose!!!
What will be temperature inside chamber ?
May I know what is the vaccum pump model ?
Question. Why it is not used for fuel energy?
Dude you are almost there! Look into the frequency references from ancient temples lile the egyptian jhed pillars and the ones from angkor
Does that plasma get good 1080p resolution? ;-)
it does!
We could make lightsabers with enough plasma
how are you getting plasma at just 540V. i dont think its possible. can you please explain?
Great video!
Why did you need the capacitor? And what was the Farad rating on it?
The capacitor is used to remove the alternate component of the current, you have a constant plasma instead of a 50/60 hz plasma
@@ltd5352is that also why the diode is there? Is this a half wave rectifier setup?
Solid! KEK!
Hi , how can I get more information about this project ?
How plasma is done on vaccum?!.
. Is it being done on a gas ?
does it produce trust? How much trust can it produce?
Hi can you please try this with the whole device at freezing or lower temperatures
Please tell me the unit of diode
what are the benefits of using plasma in sputtering physical vapor deposition
It produces the smoothest surface...when used with 100% argon gas. The plasma can also be focused better with a magnetic coil in conjunction with a filament and RF power supply.
i think you need two stage pump to get fast vacuum and put the pressure gauge away from the high voltage hv will kills all electronics
What if we increase the pressure voltage and energy 100times, would the intensity of the plasma increase??
You'd open up a portal to another dimension
MAAANO KDJFKKKFS vc é brasileiro, vejo seu canal em português. Tenho que fazer um projeto, vi seus videos, mas tbm fui procurar uns gringos, ai achei vc KKKKKKKKKKKq dahora, mano. Parabéns, curto muito vc
Do you have an application for this
looks like a fluorescent light tube
Is it really works
out of so many vids only yours showed the vacuum pump properly
are you brazilian? your accent when speaking english is very familiar to me. nice video!
You should detail the materials
What will the possible application of your plasma??
He mentioned sputtering. A process of creating thin films onto substrates.
what happens if the glass breaks?
Jesse Langdon Every single human being dies
In all these below videos they are using only a 230 volt AC supply and passing it to a microwave transformer (230V, 50 Hz, 220 series preferably). The output from the transformer is hardy 2300 volt or maximum 4600 volt on using a voltage doubler. Should we use another tranformer in series ? If yes what is the connection? Can anyone provide me with a circuit diagram for the same connecting the transformer with a capacitor with or without a rectifier. Plasma can be generated only at 20000-30000 volt so how are they able to generate plasma at just 2kV. I am currently using a a chamber such that the space between the two metallic plates in about one inch. The vaccum that I have creeated is about 25-27 inHg (more than 150 micron Hg). If the voltage generated sufficient then how to get perfect vaccum ie 30 in Hg(less than 150 microns Hg). Please help me.
put a magnet up to it,, or hang them inside and move them around
sir,please give tip about a oxygen plasma...
cara vc é brasileiro??
dá pra reconhecer pelo sotaque!!
Sim pronuncia como se estivesse falando em portugues e não em ingles.
Hey Dude! Nice video. Please, can you tell us the temperature of your plasma? Secondly, can it be touch with our finger without being electrocuted? Waiting to hear from you. Cheers!
Didn't respond. Probably got electrocuted.
@@Mumbamumba 😀😀😀
My life is complete now
Cool. Try exposing it to very strong magnetic and very cold temperature
I think it has more to do with water plasma
Run it for long enough and you unlock a friend from the fcc
Are you Brazilian?
também acho
Esse sotaque brasileiro de quem não praticou muito a pronúncia é inconfundível, no curso de inglês ouço isso a todo momento kkkkk
Acredito que seja ! kkk
Certeza que o cara é brazuca e tá fazendo um trampo bonito.
try making plasma in water. and please find out if you can splice the water in to oxygen and hho.
FORAX wow. So I was watching gaia and a top secret guy. (can't remember his title)anyway he was saying passing plasma gas thru water then drinking it will change its molecular structure.and cure. Look into it
so lit entertainment ozone water is a cleaner
olav fosse Incorrect, plasma is actually its own state- the fourth state of matter and makes up 99% of the observable universe
High vacuum stable, you are ready to charge refrigerant!
kkkk. Garotin esperto.
Those seals are terrible. Your pump must have a very hard time pumping.
lol your supposed to keep the micron gauge away from the vacuum pump
Very complicated. Why not use sound?
Btw this is the thing kamehameha is made of
That's why i love chemistry.....
Discoverd this thing but no ego like Physics......
Why do you need a vacuum chamber to make plasma?
162/5000
With 3000 volts at ambient pressure the electrodes would have to be spaced only 3mm apart. At low pressure the plasma can spread at greater distances!
Because there’s oxygen inside and vacuum chamber is high voltage and lightning is lasma the vacuum makes the chamber hotter and hotter till the gas becomes plasma
U can use a microwave
look for Paschen's law
Lesser voltage is required to create plasma if we reduce the pressure.So he reduced the pressure inside to generate plasma with whatever voltage he had. (See Paschens law for more insight)
Plasma is very powerfull
New videos when?
Please suggest me
Ormicrowave. A grape
i see X ray
Esse sotaque de paulista hein 😂