Hi, have this rx fs2a. The bare part of the antenna has come off, lost it, can you tell me how long the bare part is please so I can solder a piece on?
I noticed that you connected your esc to channel 3 on the receiver. Did you reconnect the esc to channel 2 after the binding process was complete, or did you leave it in channel 3?
Hi from France, Please, is this receiver works directly with 2S battery, for exemple 300mA for a little glider without motor? Thanks a lot for your answer! 👍
So my servo works, however, the little 4mmx8mm 1.5-3.7 dc motor up to 42000rpm isn’t working. I tried troubleshooting with esc, then motor swapping but I’m guessing it’s a bad solder? 😅
Hello! cannot set failsafe mode on this receiver. on the remote it says that the engine is off, but in fact, when the connection is lost, it continues to work. how to run a spectacle model! do you have anything to say about this? FS2A 4CH AFHDS 2A
Maybe you could try to change your transmitter RF standard to AFHDS 2A from AFHDS from the menu, but if your transmitter is only AFHDS then you are out of luck. The FSi6 allows you to switch between both RF standards, AFHDS 2A and AFHDS, I don't know about the GT3B, look in the manual.
Hi, have this rx fs2a. The bare part of the antenna has come off, lost it, can you tell me how long the bare part is please so I can solder a piece on?
horeeee... brhasil👍👍👍😄
😆😆🤘
Me encanta el nuevo receptor amigo, saludos desde México.
Hi there can you use this receiver on a drone?? I have one but I am unsure if I can use it for my drone build
i dont know about that
I noticed that you connected your esc to channel 3 on the receiver. Did you reconnect the esc to channel 2 after the binding process was complete, or did you leave it in channel 3?
Great video. 👍👍
Hi from France,
Please, is this receiver works directly with 2S battery, for exemple 300mA for a little glider without motor?
Thanks a lot for your answer! 👍
Thanks bro! subscribed
trimakasi kembali bro 🙏🙏
So my servo works, however, the little 4mmx8mm 1.5-3.7 dc motor up to 42000rpm isn’t working. I tried troubleshooting with esc, then motor swapping but I’m guessing it’s a bad solder? 😅
How is the range with these?
never check for the real result, but for mini rc plane its looks far enaught
Very good thank you!
Hello. Can I use this receiver for quads? Thanks.
If your quad only needs four channels to operate, why not.
@@janspoelstra8309 ok thanks man👍
Will this work on fs gt5 remotes having trouble getting mine to bind
never try it yet, so not sure about that
@@beginnerrchobby it dus found another videos of someone connecting it to there gt5
Hello! cannot set failsafe mode on this receiver. on the remote it says that the engine is off, but in fact, when the connection is lost, it continues to work. how to run a spectacle model! do you have anything to say about this? FS2A 4CH AFHDS 2A
Mantap om,untuk rangenya apakah sama dgn rx ia6b?
Sejujurnya saya juga kurang tau om 😅😅
is this have gyro
no is not
Hey bud, i have this transmitter that is FS-GT3B and i can't make it work, can you help?
Hi ,, sori bud i don't have experience to connect with FS-GT3B, so i dont know how to solf
Maybe you could try to change your transmitter RF standard to AFHDS 2A from AFHDS from the menu, but if your transmitter is only AFHDS then you are out of luck. The FSi6 allows you to switch between both RF standards, AFHDS 2A and AFHDS, I don't know about the GT3B, look in the manual.
@@ericwillis777trying this and still not working
привет из России, спасибо за видео