Why not show the side of the engine where the pulley is attached to the rotor? Seem like the pulley drive the center rotor drive then the rotor drive the crankshafts.
at first i could not understand what was going on here but......................... i saw the crankshaft and then finally everything fell into place. it works exactly like an internal combustion engine but instead of a cylinder head and combustion chamber and valves, the reactive force between two like poles on two seperate magnets, one on the piston and the other on the rotating mass force each other apart. multiply that by 12 cylinders all in time and reacting with the rotating mass produces a considerable force. i wonder if i could replicate this on a smaller scale.
Unfortunately it's fake. First of all I made a 3D magnetostatic model of motor in ANSYS MAXWELL software to find the torque on rotor and the force on pistons. After that, I made a fully 3d dynamic of motor in Autodesk Inventor and applied all of the forces and the torque on the motor periodically. It didn't work. Actually if there was only the torque on rotor it would work but when applying the forces on pistons it will stop. I made many different models to optimize the size of different parts of motor according to the strength of permanent magnet to produce more positive torque but non of them worked.
IT HAS TO HAVE A SMALL MOTOR TO TURN THE CENTER MAGNET DRUM, BUT THE POWER GAIN COULD BE ENORMOUS. LIKE ONE PERSON ALREADY SAID THE MAGNETS WILL WEAR OUT.
Of course it's fake. If it were real it would be a perpetual motion engine, and everyone on the planet knows that is not possible.What a waste of time and effort.The fact that they only ever show one side of the engine sort of gives it away.
Someone always says these things are fake or the violate the laws of physics etc... IDK, but it seems like something will eventually come along and someone like Elon Musk will pick up on it... THEN we will see ! ! !
kann nicht funktionieren man sieht wie eine Seite mal aus war und keinerlei Bewegung vorhanden war obwohl sich die Rolle dreht. Mit Magneten so nicht möglich.
Decisamente un fake: sotto il sistema potrebbe esserci un motore elettrico collegato al rullo centrale, il motore fa girare il rullo e i pistoni esterni si muovono di conseguenza per la presenza e la polarità dei magneti... La domanda è: perché?!?
It is not a violation of laws, magnets are like batteries, they are stored energy. It was only a matter of time before this was developed, new high power magnets are the enabler.
I am not sure how practical this is but it is sure satisfying to watch
Brilliant piece of engineering sir,not to mention free energy awesome.
The back side with the pulley and belt are never shown. So it begs the question: is this being run by a motor through the pulley?
Sorry guys, this video proves NOTHING at all!!
... Fantastic concept, superbly realised.
Why not show the side of the engine where the pulley is attached to the rotor? Seem like the pulley drive the center rotor drive then the rotor drive the crankshafts.
at first i could not understand what was going on here
but.........................
i saw the crankshaft and then finally everything fell into place.
it works exactly like an internal combustion engine but instead of a cylinder head and combustion chamber and valves, the reactive force between two like poles on two seperate magnets, one on the piston and the other on the rotating mass force each other apart. multiply that by 12 cylinders all in time and reacting with the rotating mass produces a considerable force.
i wonder if i could replicate this on a smaller scale.
Be sure to post your results.
Unfortunately it's fake. First of all I made a 3D magnetostatic model of motor in ANSYS MAXWELL software to find the torque on rotor and the force on pistons. After that, I made a fully 3d dynamic of motor in Autodesk Inventor and applied all of the forces and the torque on the motor periodically. It didn't work. Actually if there was only the torque on rotor it would work but when applying the forces on pistons it will stop. I made many different models to optimize the size of different parts of motor according to the strength of permanent magnet to produce more positive torque but non of them worked.
Look carefully when video is moving from left to right near very beginning you can see electric motor under table on pulley side clearly why is that?
What's turning the central cylinder?
Elektromagnet & (rotor)magnet (neodym magnet )👍👏👏👏🇸🇰
IT HAS TO HAVE A SMALL MOTOR TO TURN THE CENTER MAGNET DRUM, BUT THE POWER GAIN COULD BE ENORMOUS. LIKE ONE PERSON ALREADY SAID THE MAGNETS WILL WEAR OUT.
Of course it's fake.
If it were real it would be a perpetual motion engine, and everyone on the planet knows that is not possible.What a waste of time and effort.The fact that they only ever show one side of the engine sort of gives it away.
엄청난걸 연구,개발하신것 같은데 왜 아무도 반응이없죠? ,
실물을 꼭한번 보고싶네요.
We see everything but whats attached to the belt underneath
How many horsepower are obtained?
is it commercially available??
700 rpm? Oil?
Nice it's useful to generate electricity and also in vehicles
Well done
1 video clip shown repeatedly. Right side doesn't show.
How stop...start..hp..trq..rpm?..some say hoax..
Lotta trouble to be hoaxing..vid fail to show..enough..
어디로가야 이 자석엔진을 볼수있나요?, 검색이 안되네요...
Someone always says these things are fake or the violate the laws of physics etc... IDK, but it seems like something will eventually come along and someone like Elon Musk will pick up on it... THEN we will see ! ! !
Zymondo
You mean someone like Elon Musk or Bill Gates will come along and steal it.
Elon Musk is a CON-MAN and has pissed away 5.4 BILLION taxpayers dollars at last count.
kann nicht funktionieren man sieht wie eine Seite mal aus war und keinerlei Bewegung vorhanden war obwohl sich die Rolle dreht. Mit Magneten so nicht möglich.
Decisamente un fake: sotto il sistema potrebbe esserci un motore elettrico collegato al rullo centrale, il motore fa girare il rullo e i pistoni esterni si muovono di conseguenza per la presenza e la polarità dei magneti... La domanda è: perché?!?
Can this device product electric power ???
Yes. Moving magnets can do it, if you have collection coils.
It is not a violation of laws, magnets are like batteries, they are stored energy. It was only a matter of time before this was developed, new high power magnets are the enabler.
Korea?
Korea has many of these technologies.
But it does not show up well.
Something not right..
Please Give me a quotation for 50 HP.. magnetic motor
Good
This post 10 month..
I seen other post of same since 2012 +/-
Thanks
Gud Jop
The magnet s eventually wear out. That is the cost.
Less than 1% per year. But you can pulse magnetize them again.
this is not clear
Look er sound like sosay piston hit big cylinder..
Carmera care keep out of view..
how can i get that in africa?
By leaning how to do and by constructing such device yourself. It is hard.
Korea does not like in the country
주소좀 알려주세요
olur
this is fake.