Downstream Nozzles I Recommend

Поділитися
Вставка
  • Опубліковано 22 гру 2024

КОМЕНТАРІ • 131

  • @treydeatley3603
    @treydeatley3603 4 роки тому +4

    You are a good teacher. I appreciate your humble, easy attitude. Thank you very much.

  • @renostubbs8504
    @renostubbs8504 2 роки тому +1

    Excellent job Lawrence, we appreciate the subject

  • @rbilardo47
    @rbilardo47 5 років тому +3

    Good video. The M5 is the way to go. Thanks for sharing. God Bless.

  • @ThERealist2019
    @ThERealist2019 2 роки тому +1

    Keep up the good work bossman

  • @kevinmetcalf6371
    @kevinmetcalf6371 2 роки тому +1

    Great video. Where do I get the short multi nozzle

  • @mikefox7204
    @mikefox7204 4 роки тому +3

    Lawrence i pray you and family are well and that you have a blessed season next year.

  • @Rick-kp6wf
    @Rick-kp6wf 5 років тому +3

    Do you apply your sh and rinse with the M5? And if so do you just go back to your rig and pull your drop stick to stop the sh application? A little confused. Thank you for sharing all your wisdom.

    • @keenoi
      @keenoi 5 років тому +1

      Rick check out www.thestepsaver.com no need to move drop sticks of turn on/off valves wireless controller!

  • @Sandbridgeman1
    @Sandbridgeman1 2 роки тому +2

    How high up can that m5 spray soap ?

  • @AYEEEDION
    @AYEEEDION 5 років тому +3

    Let's say if you have a 5.5 gallon a minute power washer and you want to use that for soft washing what size nozzles do you need to have???

  • @deoriginoo
    @deoriginoo 3 роки тому +2

    So when you downstream will it stop pulling soap and just push water based on how you adjust the nozzle

  • @toddluns1
    @toddluns1 5 років тому +3

    Which injector do you use? I've been trying different brands and right now I'm using an Allison Super Suds Sucker stainless 33%. Claims they have gotten 50% out of them during lab tests. You won't get that real world, but I can definitely tell you I'm pulling more chems than ever before. It makes me move around the house quicker cause I can burn through some SH if I'm not paying attention. I've used 5 other brands and so far this Allison is the one for me. They sell two lower models that I haven't tried yet, but I'm planning on it. One is 27% and the other is 23-24? I'm hoping the stainless will make it last a lot longer. I've had some injectors last three days. Others 8 months. Anyway, which do you prefer?

    • @johnpressurewashingpaintin9066
      @johnpressurewashingpaintin9066 4 роки тому

      have you compared to the X jet?

    • @toddluns1
      @toddluns1 4 роки тому

      @@johnpressurewashingpaintin9066 I don't like the xjet. I think they're a pain. I'm still using the stainless Super Suds Sucker. Over a year and it still sucks a ton of soap quick. I'll never use another brand.

    • @toddluns1
      @toddluns1 3 роки тому +1

      Yes I bought an x5 a few years ago. It’s buried in my toolbox somewhere. Never use it. I have gone back to the Assassin and the Guy Blackmon. Just depends on which wand I grab from my trailer. Personally I like the Assassin better. The Davis tip is ok, but it’s overrated. I use a 7.2 gpm machine so honestly it doesn’t matter which tip I use. I hit 4 stories no matter what nozzle I use. I took my Xjet apart and use it with the widest orifice. I use a 15 gallon tank with it, and a 100ft hose so that I’m not constantly dragging my mix all around. Only time I use the Xjet gun is when I clean commercial buildings that require a higher SH%. Doug Rucker has a video showing you how to build the Xjet gun I use. Rarely do I have any issues. Rather than waste money on an Xjet I suggest saving your cash and just buy a higher flow machine. If I had to drop back down to a 4.5gpm machine like I had when I started I’d quit this industry all together.A high flow machine solves almost 99% of most issues in this business.

    • @koreymeagley2261
      @koreymeagley2261 2 роки тому

      Do you have to manually turn the soap off?

  • @derekcarter3470
    @derekcarter3470 Рік тому +1

    This may seem very basic but can anyone tell me how to get a hotter mixture with water when using a downstream injector? Change the water to chemical ratio? Any help would be greatly appreciated.

  • @davethewindowlicker2367
    @davethewindowlicker2367 6 років тому +2

    Good stuff switching nozzles is a pain..... optimization is key

  • @artbentley4887
    @artbentley4887 2 роки тому

    Hello, with SH what else do you add to the mix. Also, how do you protect plants and foliage

  • @mikeg7843
    @mikeg7843 6 років тому +1

    Lawerence your clips are giving me insight greatly. I’m over on the middle peninsula and hope to run into ya one of these days. I’d live to show ya my set up! Until then, keep it clean!!

    • @powerwashingprosinc.lawren922
      @powerwashingprosinc.lawren922  6 років тому

      Mike G man that’s cool, what’s the name of your company. Hopefully not George Ronnan....lol

    • @mikeg7843
      @mikeg7843 6 років тому

      We are just starting out. Finished building truck a little late for this year. We called
      Shore Shine LLC. Haven’t gotten into the UA-cam thing yet! But check me out on Instagram@shoreshinellc.

    • @powerwashingprosinc.lawren922
      @powerwashingprosinc.lawren922  6 років тому

      Mike G okay good I’ll check you out

    • @giantslayer473
      @giantslayer473 2 роки тому

      @@mikeg7843 ordered my gear/pw/surface cleaner this past friday. How have things worked out so far for u?

    • @mikeg7843
      @mikeg7843 2 роки тому

      @@giantslayer473 Things are going well. Are you located in the area?

  • @richardmurry9866
    @richardmurry9866 4 роки тому

    I was thinking of the asked yet I amfive set up. Not too complicated and less to carry

  • @rsookdd8632
    @rsookdd8632 4 роки тому +1

    Does the m5 nozzle alone replace the xjet m5?

  • @toddluns1
    @toddluns1 4 роки тому +2

    Kyle Davis is selling an long reach nozzle now. It's by far the best long reach nozzle out there. Your stream doesn't atomize so you get a longer reach than all the other long reach nozzles. Better than the Assassin and def better than the Ladder Saver. Also better than the M5. Look it up. They're $25...

    • @kevinbaker07
      @kevinbaker07 4 роки тому

      where

    • @toddluns1
      @toddluns1 4 роки тому +1

      @@kevinbaker07 davisshootertips.com. They are better than any other tip ive ever used. Only $25 too..

    • @willynilly1445
      @willynilly1445 2 роки тому

      Does it pull chemical?

  • @jamesvalencia1508
    @jamesvalencia1508 2 роки тому

    How do you rinse with the m5 without it sucking on the Downstreamer?

  • @davidrush8283
    @davidrush8283 5 років тому +2

    Thank you for your time and help

  • @rabbitskinner
    @rabbitskinner 3 роки тому

    I use these, how long do you get out of yours ? I only use the adjustment for rinsing

  • @toddluns1
    @toddluns1 5 років тому +2

    I bought an M5 last year. After you get used to it I think its pretty kick ass. It can be weak compared to a good .0050 spray jet tip. Never cared much for the Assassin. I have one screwed into a Jrod but it doesn't see much action...For a standard size house the M5 is great....

    • @bmlandmanagementco4981
      @bmlandmanagementco4981 4 роки тому

      T Lunsford when you say standard sized house,...are you talking about a single story home?

    • @toddluns1
      @toddluns1 4 роки тому +1

      @@bmlandmanagementco4981 By standard size I meant an average 2 story house. You can easily shoot above the gutters. I use a 5gpm machine for residential jobs, and I use a 4ft wand. With 3 story houses I sometimes have to use my 9ft extension wand depending on how bad they are.

    • @bmlandmanagementco4981
      @bmlandmanagementco4981 4 роки тому

      T Lunsford gotcha.

    • @adamg.3138
      @adamg.3138 3 роки тому

      How high will the M5 twist shoot when using a 3.5 gpm machine?

  • @allensterling2941
    @allensterling2941 3 роки тому +2

    Can the N5 twist nozzle be used for applying chemicals/soap up to 3 stories.

  • @williamclaud8856
    @williamclaud8856 5 років тому +1

    Im from Norfolk va. Where do you get your soft wash equipment from in this area

  • @timj5367
    @timj5367 5 років тому +7

    This nozzle will actually pull soap ?

  • @DylanClemons
    @DylanClemons 2 роки тому

    How many gpm machine here?

  • @mazman8343
    @mazman8343 5 років тому

    great video what dilution for house wash please

    • @powerwashingprosinc.lawren922
      @powerwashingprosinc.lawren922  5 років тому +1

      maz man I use about 3 gallons of water 2 gallons of 12.5% Bleach with about 3-4oz of soap mixed together for downstreaming sometimes if it’s colder outside I add more bleach

    • @mazman8343
      @mazman8343 5 років тому

      @@powerwashingprosinc.lawren922 thanks friend
      i was thinking 4gal water 1 gal hypo is this to week my hipo is 10 percent

    • @chipmohan1534
      @chipmohan1534 5 років тому +1

      maz man, 4gal. water, 1 gal. SH sounds very weak, but whatever works man. That’s for you to learn through trial and error. I think we all start out keeping it weak to save money, but we all eventually learn that we need to mix it hotter.

  • @tsh30039
    @tsh30039 6 років тому +6

    How do u down stream the bleach using the M5

  • @rayg135
    @rayg135 4 роки тому

    Hey can you tell me what fittings you use on your gun? I bought a brand new gun but I can find the fittings to assemble it for the inlet and outlet.

  • @nantucketjeep
    @nantucketjeep 5 років тому +1

    For soap only, can you power wash with it?

    • @powerwashingprosinc.lawren922
      @powerwashingprosinc.lawren922  5 років тому

      nantucketjeep if you’re only using soap and nothing else you’re not going to get the best results

    • @toddluns1
      @toddluns1 4 роки тому +1

      No you can't power wash with the M5. It's for soaping and rinsing only.

  • @l.h.c.powerwashing7289
    @l.h.c.powerwashing7289 5 років тому +1

    Key west is my favorite place to go. Been there a few times love it

  • @vsujones
    @vsujones 4 роки тому

    Can this be used with a regular DeWalt pressure washer 3400 PSI?

  • @joeschmitz2790
    @joeschmitz2790 6 років тому +1

    Where do you buy your M5 nozzle? Or do you buy the X jet and use the nozzle part?

    • @powerwashingprosinc.lawren922
      @powerwashingprosinc.lawren922  6 років тому +1

      JoeDIY&Rentals they have the M5 nozzle by itself for downstreaming and then the M5 xjet. The powerwash store and south side equipment

    • @joeschmitz2790
      @joeschmitz2790 6 років тому

      Thanks brother!!

    • @joeschmitz2790
      @joeschmitz2790 6 років тому +1

      Would you tell me what SH ratio you uses on a 5.5 gpm when down streaming from a 5 gallon bucket. Thank you!

    • @powerwashingprosinc.lawren922
      @powerwashingprosinc.lawren922  6 років тому +2

      JoeDIY&Rentals it depends on the temperature, the warmer the temperature the SH reacts and cleans faster especially during the summer. Normally I would use about 1/3 SH and 2/3 Water during the warmer months but as the temperatures cools during late fall and early winter you want a stronger mix like 1/2 SH and 1/2 water for a 5.5 gpm machine, this is based on 12.5% SH but if your using a less percentage SH like 10% or less than you would need to adjust by adding more SH

    • @joeschmitz2790
      @joeschmitz2790 6 років тому +1

      Thanks a lot man. I been looking for a new machine and the 5.5 is only $100 more. I been using a 50/50 mix with 12.5 so I think ill stick with it. Here in Missouri it seems to work well. I think ill water it down in mid summer like you said. Thank you!

  • @bmlandmanagementco4981
    @bmlandmanagementco4981 4 роки тому +2

    Do you use more chemicals when xjetting vs downstreaming? That’s what I’m trying to figure out.

    • @toddluns1
      @toddluns1 4 роки тому +2

      The xjet is a pain in the ass. How much chemical you use will depend on which color orifice you use. In my opinion downstreaming is the way to go. I've been doing it that way for 15 years and it serves me well.

    • @bmlandmanagementco4981
      @bmlandmanagementco4981 4 роки тому

      T Lunsford I see. Thanks for the info.

  • @suzuki400sm
    @suzuki400sm 6 років тому +1

    Have you tried that nozzle on your soft wash setup yet.

    • @powerwashingprosinc.lawren922
      @powerwashingprosinc.lawren922  6 років тому +8

      MikENY yes I have and I forgot to mention it.....it works super well for soft washing😎 it’s the only nozzle I use for all my roof cleans other then house washing

    • @suzuki400sm
      @suzuki400sm 6 років тому +2

      Thank you for answering my question. 👍🏻

  • @samsonitepaintingmorellc7383
    @samsonitepaintingmorellc7383 4 роки тому

    Where did you you get your 6 gallon per minute pump?

  • @dekonfrost7
    @dekonfrost7 2 роки тому

    Smithfield packing burn down yet?

  • @vspd303
    @vspd303 6 років тому

    I like using the twist nozzle works very good. Also I have a Guy Blackman Shooter Tip well built but you can go to Lowe’s and buy a pink colored tip for $12 and it will do the exact same thing as the shooter tip. Also www.watercannon.com has these twist nozzles at a fairly good price and I believe you need to get one that’s specific of your machines gpm. I see you have a shut off valve can I ask what the benefit of that is thanks for the videos

    • @powerwashingprosinc.lawren922
      @powerwashingprosinc.lawren922  6 років тому +5

      Steven Mendez the ball shut off valve attached to the gun is handy for many uses. Before starting my machines I open that valve wide open on and lay it on the ground with no gun attached then start the machine which pushes all the air out of the lines to get full water flow before shutting off the valve then attaching the gun. Also the shut off valve allows you to switch over from a gun to a surface cleaner and vise versa without shutting your machine off. You can also rinse and soap with just the valve with gained practice and experience.

    • @benderprofessionalservices9018
      @benderprofessionalservices9018 5 років тому

      How do you make a cut off valve and can all this been done with a 4gpm soft wash system. I always hear you talk about both the pressure washer and soft washer. I’m guessing soft washer for roof only and pressure washer for house? Tku

  • @johnferriola3957
    @johnferriola3957 Рік тому

    kinda funny....I did this same thing a couple of weeks ago and never seen anything about using a downstream nozzle.

  • @Drago2600
    @Drago2600 4 роки тому

    And that amount of pressure is with the machine off?

    • @JD-yx7be
      @JD-yx7be 4 роки тому +1

      The machine has to be on to make that pressure. The machine is probably far away so you can't hear it

  • @segesta613
    @segesta613 4 роки тому

    would that tip throw soap ?? ty

  • @josephbell4061
    @josephbell4061 6 років тому +1

    What’s you gpm on your pressure washer?

    • @powerwashingprosinc.lawren922
      @powerwashingprosinc.lawren922  6 років тому +1

      Joseph Bell I’m using a 5.5 gpm but it puts out over 6 gpm easily

    • @toddluns1
      @toddluns1 5 років тому +1

      A lot of them are underrated. I have a Cat that is rated at 4.8 @3000psi. I get close to 5.5 easy. Especially if I'm somewhere with strong water pressure.

  • @softwashscience
    @softwashscience 5 років тому +1

    The assassin nozzle is the worst shooter tip made. Its aluminum so it pits and the path for the water is not hydrodynamic at all. I had 2 of them and cut the internals on a 3d cnc correctly. I did not change the orifice size just the h20 inlet collection. I posted videos on some of the facebook pages hoping the maker would get the point. As far as the 2 banger vs 4 everyone needs 1 soap and rinse low tip, 2 rinse and soap high tip, 3 super long range shooter/ blaster tip for bees nest and 4 a bit more powerful 25 to 15 fan tip 10 to 30 size orifice depending on your gpm 4 to 10 and thats for concrete boarders and rinsing flat work. Some will need more than 4 (I use 2 3 bangers) no one needs less unless you are a booster pump guy. The m5 twist just has minimal distance and not enough ass behind it for my washing but it is efficient so I keep it in the arsenal. 5.5 gpm like you got about a .164 1000’s is perfect orifice size. For reference the assassin was a .156 or .157 I believe on the index chart. A 0040 is a .155 if I remember correctly. Hope some of this helps.

    • @powerwashingprosinc.lawren922
      @powerwashingprosinc.lawren922  5 років тому +1

      Skyline Sand Sports good information, my assassin shooter nozzle is a stainless steel type, I would never buy one made of aluminum

    • @softwashscience
      @softwashscience 5 років тому +1

      Power Washing Pros Inc. Lawrence Ashlin when I got mine they did not offer them in stainless, wish they did. I just got 3 of the OST’s but believe they are getting redesigned now so can’t wait to see those.

    • @mitchellwood3576
      @mitchellwood3576 5 років тому

      @@softwashscience what's ost stand for?

    • @softwashscience
      @softwashscience 5 років тому

      Mitchell Wood ost Origional Shooter Tip from Guy Blackmon. On a side note its also one stop performance who happened to tune my turbo charged razor lol.

  • @galdinobruno19
    @galdinobruno19 5 років тому

    what size of assassin nozzle u have? i try order one i have 5-6 gpm pump

  • @jasontrevett5580
    @jasontrevett5580 5 років тому

    My man. Always on it. Thanks again bro

  • @BadWeatherfreak
    @BadWeatherfreak 4 роки тому

    That 0 degree long nozzle pull soap?

  • @MrNenemott
    @MrNenemott 6 років тому +1

    m5 twist noxle I found is listed at $85

  • @CrazyAvy
    @CrazyAvy 2 роки тому

    Oh nice! I'm in Norfolk

  • @Igor-q3f
    @Igor-q3f 5 років тому

    I used this for couple days and don’t se the difference between this and blue and black nozzle from Home Depot on a 4gpm.

  • @patricknesbitt9208
    @patricknesbitt9208 5 років тому

    Great video. Very informative

  • @andreamanning2428
    @andreamanning2428 2 роки тому

    Thanks for your heard

  • @sonoftruth4090
    @sonoftruth4090 5 років тому

    Is 12.5 sh safe for colored vinyl? What is safe chemical mix to use for a vinyl siding like that?

  • @farlese42
    @farlese42 6 років тому

    This past power washing season,
    I purchased the M5 xJet. It’s kickass.
    I’ll never look back.

  • @rsookdd8632
    @rsookdd8632 4 роки тому

    Is that the xjet m5?

  • @kevinhayes4689
    @kevinhayes4689 6 років тому +1

    How many feet of hose are you running?

    • @powerwashingprosinc.lawren922
      @powerwashingprosinc.lawren922  6 років тому

      kevin hayes 200 ft

    • @kevinhayes4689
      @kevinhayes4689 6 років тому +1

      Great. That is what I run as well. Does that tip pull from a downstream injector or a hose and a bucket?

    • @antoniorivera1311
      @antoniorivera1311 6 років тому +1

      @@powerwashingprosinc.lawren922 200ft of hose one piece or multiple hoses attached together? I can't find any 200ft hose. Longest I think like 100ft

    • @powerwashingprosinc.lawren922
      @powerwashingprosinc.lawren922  6 років тому

      kevin hayes Yes it pulls from a downstream injector

    • @antoniorivera1311
      @antoniorivera1311 6 років тому

      @@powerwashingprosinc.lawren922 where did you get the hose?

  • @herbertvonsauerkrautunterh2513
    @herbertvonsauerkrautunterh2513 2 роки тому

    I like the pistol.. I can hold up the store downtown.

  • @chriscaz1239
    @chriscaz1239 3 роки тому +1

    I love bacon.

  • @Addictedtothewild
    @Addictedtothewild Рік тому

    M5 twist soap on. x jet soap off.

  • @workinjet
    @workinjet 5 років тому

    26