I think I'll ned your help. I have 5.5 GPM pump with j-rod 25400 soap and 25150 rinse, and it doesn't matter if I change from high to low it's still drawing SH and soap. I bought j-rod for 4GPM pump with smaller orifice, and it's still drawing. A little more tips please. I'm just starting BTW👍
I’m watching your video right now and you’re talking about the tips on the J Rod for 5 gallons per minute. But I’m using a 4 gallon per minute could you tell me what tips I should be using on that J Rod for a 4 gallon per minute. thanks
*russ johnson website says the one you are using is the 5-6 gpm nozzle kit. Should I be ok with the 4gpm nozzle kit that's basically what I have (0010, 0040, 2510 , 2540* 🙏🏽🤦♂️
Do you ever have to worry about over spray hitting objects or materials nearby with chemical? Im new to the industry and one i've struggled to find an answer for this. Thank You for sharing the knowledge!
Love your videos bro. To make sure I understand, every time you want to rinse or water plants ect.. you have to walk back to your machine and turn the 3way ball valve to stop the soap? If that’s the case, I would rather carry around the bucket and x-jet it.
Yeah but then you got to carry 5 gallons of a state which could be 50 pounds around the yard. And only have to walk back to the truck four times during the whole thing. I can do a 2000 2500 square-foot house in 45 minutes or less
@@kingofpressurewash that’s a good point. If you are doing smaller houses, going back to the truck 4 times is no problem. Our average house is 4500sqft with many much bigger. They are on a big piece of land with hills and intricate landscaping. It’s a big deal to walk back to the truck especially when your on the backside. Because of the other services we offer all trucks must have 2 technicians. It seems to me, 2 guys with 4 closed 5gal Pails can set them in 4 locations around the house. 2 pressure washers on one rig. You can have the 2 technicians washing and rinsing at the same time. What do you think? I’m building a new rig and I am having a hard time deciding which way to go. You know me, I’ve been 12v pump guy for years. It’s time to get some speed in my life.
@@kingofpressurewash I believe they are right. I have an m-jet for a 4 gallon machine. Even on the straight setting it does not shoot a perfectly straight stream of water.
I use the 3-7 gpm M5 twist nozzle on my 8gpm machine for rinsing ..works great... you kind of got to use one that is rated slightly lower than the machine you are using 👌🏼👍🏼
Can you answer my question please. I have a pressure wash company in new york we do great but i just saw this “soft washing” on youtube. Never heard if it until now. Do i have to get a whole new system or can i soft wash with my pressure washer. When spraying bleach onto a home wont that wind up damaging or compromising its original color. Hope you can help answer these questions your videos look very good. Subscribed
Yes you can use your current pressure washing system. Here’s a playlist of videos of how to downstream. Also I’m gonna put a link down here of my classes so I can teach you how to clean houses and not damage stuff or kill stuff. Down Stream Injection ua-cam.com/play/PLbLTw4ieTCDCOxvklZhAH_cvLQwX3pUV8.html Pressurewashhelp.com/training
Billy bob Jacob Absolutely. When you clean with clinicals you’re actually getting a clean house not just knocking off the dirt. You’re also doing it with high-pressure you’re going to mess with the oxidation. I can clean a house in less than 45 minutes to an hour at 2500 to 3000 square-foot house
I think I'll ned your help. I have 5.5 GPM pump with j-rod 25400 soap and 25150 rinse, and it doesn't matter if I change from high to low it's still drawing SH and soap. I bought j-rod for 4GPM pump with smaller orifice, and it's still drawing. A little more tips please. I'm just starting BTW👍
Here's a brief video I made for your downstream injector. Here are the troubleshooting things you need to do. ua-cam.com/video/IHVlx2pXPV0/v-deo.html
Thank you!!
Thanks for explaining how dangerous high pressure can be even with a 4 gallon machine.
Nippin through a hoodie…. Respect good video!!!
I got a jROD from Amazon coming and it has 00100, 00030,25100 and a 25030 tips. Are those good sizes?
Much love for your videos sir! Love your channel!
Where can I get this set up??
I’m watching your video right now and you’re talking about the tips on the J Rod for 5 gallons per minute. But I’m using a 4 gallon per minute could you tell me what tips I should be using on that J Rod for a 4 gallon per minute. thanks
Go to pressuretek.com,they are experts and will assist you in choosing your jrod tips.
Thank You for this. Youre the best guy on here, and funny!
I try to keep it entertaining lol
I just got my j rod from pressure city has the long shooter tip hope I ordered a good one
*Hey jason I have a 2540 , 2510 , 0010 , 0040 ... how do you feel about the 0010 , and 2510 ? thanks*
*russ johnson website says the one you are using is the 5-6 gpm nozzle kit. Should I be ok with the 4gpm nozzle kit that's basically what I have (0010, 0040, 2510 , 2540* 🙏🏽🤦♂️
What about sizes for a 6gpm machine?
Will the 5 degree remove oxidation?
No it will not
When using jrod for down streaming you have to remove dip stick to rinse or just change tip
Remove it unless you have a tip that won't pull soap..on his j rod three out of the four will pull soap
Great info, thanks! Where I can get the yellow turn nozzle.
But I’m at Home Depot. I haven’t found any on Amazon yet
Thank you Jason!
How much for that small gun.
Fantastic advice keep up the great job!
Thanks Eric
Do you ever have to worry about over spray hitting objects or materials nearby with chemical? Im new to the industry and one i've struggled to find an answer for this. Thank You for sharing the knowledge!
Same question but mostly worried about killing grass from runoff coming down the side of a house
@TREBLEBOOSTER65 pre wet grass/plants and saturate after
What about a 1540 nozzle? Any benefit?
not really
Great videos. Where can I buy a couple 0540 tips without paying an arm and a leg for shipping? Thank you.
Any pressure washing store
So Russ Johnson says that the 2515 is still going to draw soap for a 4gm. Does this mean we just move the downstreaming stick into the buffer tank?
i just use my soap nozzles and move stick or put a shut off valve on soap
@@kingofpressurewash rock on
How do we get a hold of Russ Johnson for the 0540 setup? TIA👾
Javi Garcia call him
@@kingofpressurewash is that Southside Equipment?
Love your videos bro. To make sure I understand, every time you want to rinse or water plants ect.. you have to walk back to your machine and turn the 3way ball valve to stop the soap? If that’s the case, I would rather carry around the bucket and x-jet it.
Yeah but then you got to carry 5 gallons of a state which could be 50 pounds around the yard. And only have to walk back to the truck four times during the whole thing. I can do a 2000 2500 square-foot house in 45 minutes or less
@@kingofpressurewash that’s a good point. If you are doing smaller houses, going back to the truck 4 times is no problem. Our average house is 4500sqft with many much bigger. They are on a big piece of land with hills and intricate landscaping. It’s a big deal to walk back to the truck especially when your on the backside. Because of the other services we offer all trucks must have 2 technicians. It seems to me, 2 guys with 4 closed 5gal Pails can set them in 4 locations around the house. 2 pressure washers on one rig. You can have the 2 technicians washing and rinsing at the same time. What do you think? I’m building a new rig and I am having a hard time deciding which way to go. You know me, I’ve been 12v pump guy for years. It’s time to get some speed in my life.
Hey, good video. I have 50meters (164feet) of pressure hose. How would I get a downstream injector working? My pump is 21litres (5.5gpm) / 200bar.
Make sure you have a right size tip in your gun. Make sure it’s not leaking anywhere
I have a 4gpm Dewalt. If I have a jrod would it make a difference if I switched to a suttner verses the factory gun that comes with the unit?
Buddy, how do you get a hold of Russ Johnson?
Call him Southside equipment in Louisville Kentucky
Where I can get the yellow turn nozzle. I have looked all over Amazon and can't find one.
Walmart hyper tough is the last ones to sell that style. The usual companies moved to a rotary one like a garden hose sprayer.
Great information
Thanks for watching
Do you turn down the pressure ( and for what psi ) on the machine when you useing the downstream injector?
No we do not turn down pressure. Well I we do but we do it through the jrod
@@kingofpressurewash Nozzle Size
Can I use a 100" pressure washer hose with a 2.5 gallon per minute without having any problems
How are you soaping with the 5 degree when it is a rinse tip? It won't open the injector? thanks for all your vids!!
Orifice size. Degree is just how wide it sprays. Just in case you never got the answer.
What is that yellow nozell colled
I’m using 40s on my 8gpm is that why I can’t get any pull from my downstream?
Yup building to much pressure
@@kingofpressurewash makes sense. Sadly I’ve spent a lot of time working on this issue. Just ordered a few 60 series. Thanks for the video
@@creeksidepressurewashing1443 noproblem. Glad I could help
What do you think of the M5 nozzle?
my guys dont like them they are ok but they say it doesnt shoot as far
@@kingofpressurewash I believe they are right. I have an m-jet for a 4 gallon machine. Even on the straight setting it does not shoot a perfectly straight stream of water.
I use the 3-7 gpm M5 twist nozzle on my 8gpm machine for rinsing ..works great... you kind of got to use one that is rated slightly lower than the machine you are using 👌🏼👍🏼
@@xtremepowerwashing1815 I may have to give that a try!(I just jumped to 8gpm)
@@DeadMansPartyFilms you won't regret it.👍🏼
What size pressure washing are you using?
4 gpm machine
do you need the gun for the jrod?
You don’t have to have a gun
Where can I get a 0550 low pressure nozzle?
Get it from Russ Johnson at Southside equipment
@@kingofpressurewash thank you for the information
Hey man how do I know which one to get I have a 4 gal a min 4400 psi Simpson
Look up j-rod 4gpm
Was the grees nozzle the ryobi tip i see online?
Yes it is
What pressure wash gun do you use with a 4GPM and a 5.5GPM machine ?
I like using the suttner12 gallon a minute one. That way there’s no chance of restriction
Thank you
Great video...
Thanks for watching
What % mix should I use on non-painted wood decks, railings, siding?
Low percentage, you're also going to want a brightener
What size GPM are you using in this video
25° is a green tip
Can you answer my question please. I have a pressure wash company in new york we do great but i just saw this “soft washing” on youtube. Never heard if it until now. Do i have to get a whole new system or can i soft wash with my pressure washer. When spraying bleach onto a home wont that wind up damaging or compromising its original color. Hope you can help answer these questions your videos look very good. Subscribed
Yes you can use your current pressure washing system. Here’s a playlist of videos of how to downstream. Also I’m gonna put a link down here of my classes so I can teach you how to clean houses and not damage stuff or kill stuff.
Down Stream Injection ua-cam.com/play/PLbLTw4ieTCDCOxvklZhAH_cvLQwX3pUV8.html
Pressurewashhelp.com/training
Power Washing do you think its actually worth down streaming these chemicals vs spray with a teloscoping wand with a green tip
Billy bob Jacob Absolutely. When you clean with clinicals you’re actually getting a clean house not just knocking off the dirt. You’re also doing it with high-pressure you’re going to mess with the oxidation. I can clean a house in less than 45 minutes to an hour at 2500 to 3000 square-foot house
What do you recommend for low washing 5 1/2 gallon per minute 20 horsepower machine
Do you mean like what type of brand of machine?
Thank you so much for this haha
👍
Let's make a deal: if you have a downstream injector in your pocket, you win $5,000
Degrees hahagaha