Poor CHUCKY NORRIS whooping his own ass..😂😂😂 Miller loves it. My pocket book doesn't 😂... Those subs should have took the juice..Might have a bad one.. that's ok..I got more.. We will slap the other ones in and see how it goes. I put 10k on the harmony 12s but they were well broke in. It may be something as simple as break in..its definitely broke in now.. lol Everything is coming along fine . Jerry , you just have to pull that top alt and swap the pulley over to the other alt with no pulley. I need to send the one you pull back to JS ALTERNATORS to have it external regulated for a back up. Looks like we gonna have Jangalang and Death Note door issues...damn !! We need a tank hatch or something.. Great job.... Thanks everyone for the hard work so far.
man we ran underglow under our lowriders in the late 90's that shit is so played out and old but to each their own nice job saying it is Debs day we know what you mean as men lol have a good one great vid bro
I would have to say that Nolan better go buy a couple doors if he plans on putting this to work next year!!! This looks like an exciting DeazNutz Build..... cant wait
I always have trouble with the ferrules going into my amps too. I use 2/0 gauge welding cable for my power supply and it fits fine in my Taramps amplifiers but a 1/0 ferrule will not fit the cable and a 2/0 ferrule won’t fit in my amp so I just crimp them onto the wire until they will go into the amp and then call it good.
That switch panel needs a trim ring, have someone with a 3D printer make one for you. WOW! That little Scion is going to shake itself to pieces! Nolin... your subs are broken in..
I got the cheap Amazon fan controller...that thing actually works well. Setting the turn on temp is a bit off?.once you figure out the correct temp it's works everytime
Hey man, love ur videos, long time subscriber, I’ve learned a lot from u, I got a question. U put that front wall on with lag bolts and weather stripping? That works? What kind of weather stripping did u use if u don’t mind me asking?
Those subs are like 1750 rms each they seamed to go too easy are they smaller than a g2 genesis sub? I know my old deadgame v3 15s are tanks and rated the same but take way over rated daily?
I've done boxes since 1984... SPL wall stuff is not my mainstay ...but he said the wall port was tuned to 45 hz which is about right...for bandpass...the rear chamber to front chamber should be way lower
Generally Rear chamber : • Go alittle smaller than recommended ported volume incase you wish to put over rms power on subs. • rear chamber port area = 6-8 in2 of port area per cube • ratios : don’t really worry about it unless it gets to like 3:1 or higher. If your ratio is too high you will kill your bandwidth. Lower ratios lower peak and give a flatter wider response. • front chamber port area = 14-16 in2 of port area per cube This is just a general understanding of a 6th order design but I can’t put it all out there. Some stuff I have to keep to myself. This will get you started and should have a strong 1st set up
I don't get this 1....Buc'ees sucks it's an oversized gas station / tourist trap with marginal food ....enjoy the car audio content ...but Buc'ees sucks
Deb was killing them
Demos 🔥🔥🔥🔊
Poor CHUCKY NORRIS whooping his own ass..😂😂😂 Miller loves it. My pocket book doesn't 😂... Those subs should have took the juice..Might have a bad one.. that's ok..I got more.. We will slap the other ones in and see how it goes. I put 10k on the harmony 12s but they were well broke in. It may be something as simple as break in..its definitely broke in now.. lol
Everything is coming along fine . Jerry , you just have to pull that top alt and swap the pulley over to the other alt with no pulley. I need to send the one you pull back to JS ALTERNATORS to have it external regulated for a back up. Looks like we gonna have Jangalang and Death Note door issues...damn !! We need a tank hatch or something.. Great job.... Thanks everyone for the hard work so far.
Jerry said that thang gone be nasty... that thang IS nasty already😂
man we ran underglow under our lowriders in the late 90's that shit is so played out and old but to each their own nice job saying it is Debs day we know what you mean as men lol have a good one great vid bro
I would have to say that Nolan better go buy a couple doors if he plans on putting this to work next year!!! This looks like an exciting DeazNutz Build..... cant wait
poor Scion doors, Nolan about to find out! those LEDs are badass by the way, its coming together nicely.
Been waiting on the build update!!
O boy not the harmony 😂... lol, nice work on the subwoofer box real looks alsome.🔊🔥🔥🔥
Hey Jerry that brown wire is called root beer !!! And it was a killer deal on them Rolls couldn't pass up the price from robot
"Smoke & watch Hocus Pocus." 🤣🤣
Bruh 😂😂
That was bonkers. Can't wait to see the build complete.
I always have trouble with the ferrules going into my amps too. I use 2/0 gauge welding cable for my power supply and it fits fine in my Taramps amplifiers but a 1/0 ferrule will not fit the cable and a 2/0 ferrule won’t fit in my amp so I just crimp them onto the wire until they will go into the amp and then call it good.
That switch panel needs a trim ring, have someone with a 3D printer make one for you. WOW! That little Scion is going to shake itself to pieces! Nolin... your subs are broken in..
dang bro I saw tht spark in the back and it's nasty good video
I got the cheap Amazon fan controller...that thing actually works well. Setting the turn on temp is a bit off?.once you figure out the correct temp it's works everytime
Nice build
Bucees for the Win!
Love your show. We can agree to disagree on bucees
And he is upgrading subs and power 😂😂😂
Hey man, love ur videos, long time subscriber, I’ve learned a lot from u, I got a question. U put that front wall on with lag bolts and weather stripping? That works? What kind of weather stripping did u use if u don’t mind me asking?
just 1/2" thick foam stripping.
Thanks, keep up the good work man love how great u and ur wife do ur stuff together
And the lights you use in your builds
Those subs are like 1750 rms each they seamed to go too easy are they smaller than a g2 genesis sub? I know my old deadgame v3 15s are tanks and rated the same but take way over rated daily?
Man death note so needs a mirror at the back or an infinity mirror would be sik
Building my first 6th order. How do I learn ratios and port sizes?
I've done boxes since 1984... SPL wall stuff is not my mainstay ...but he said the wall port was tuned to 45 hz which is about right...for bandpass...the rear chamber to front chamber should be way lower
Generally
Rear chamber :
• Go alittle smaller than recommended ported volume incase you wish to put over rms power on subs.
• rear chamber port area = 6-8 in2 of port area per cube
• ratios : don’t really worry about it unless it gets to like 3:1 or higher. If your ratio is too high you will kill your bandwidth. Lower ratios lower peak and give a flatter wider response.
• front chamber port area = 14-16 in2 of port area per cube
This is just a general understanding of a 6th order design but I can’t put it all out there. Some stuff I have to keep to myself. This will get you started and should have a strong 1st set up
👍👍
How much air space did you end up giving each sub? I remember in another video you was saying your subs in the other truck might of had to much
I was curious what you did for an alternator. Did you do a single or double? If double I'd like to know how you did it.
Yep, grizzly hair across the top.those subs get down , gonna break stuff.
Buuuuuuddy 🤣🤣🤣
Where do i pick up that switch bank
Amazon, it is a Auxbeam switch
What abou the light you use in the enclosure? Thanks @JerryAintloud
👍🏼👍🏼🖤
😳
man the batteries cost more than the damn car is worth
Dude atleast eat off camera
Buckeyes is awful
😢 I love Buc-ee’s
I don't get this 1....Buc'ees sucks it's an oversized gas station / tourist trap with marginal food ....enjoy the car audio content ...but Buc'ees sucks
I love that place.
Looks like it got unloaded