Great video, thank you Amanda. When mixing the liquidity split resin, is there’s a difference on which you add to your cup first A or B? Thank you so much 😊
You have so far made this the easiest to understand and able to actually do one. Love my torch, same one. What is the difference between using the UV epoxy and the one I have which is liquid stone. I use that one on tumblers abs is great but just have never used UV do not sure of the benefits or differences
Ultra UV is our UV additives that can improve UV resistance in the cured coating for up to ten times longer than the regular formula. Liquid Stone and Liquid Art share many similarities, but the main differences are that Liquid Art is thinner and has a longer working time, while Liquid Stone will cure slightly harder.
Great video. You have such a relaxing voice while instructing what to do. The mug turned out beautiful. My colors must be off on my phone for this video cause you kept saying bronze and gold and I swear that was copper not bronze and bronze instead of gold, lol.
It's your preference! When it's wet, the colors will blend a bit, if you let it dry (these spray paints dry VERY quickly) your colors will be more separated. Both ways look great! This particular tumbler has a mix of both
I use KSresin fast set religiously. However, I would love to know how long I should be mixing. I use a food scale to ensure I get equal parts of A and B. I mix with a Popsicle stick or metal stirring stick. I stir for at least five minutes, but would love the proper mixing time. Any help is helpful.
Heya 👋 Measure by VOLUME. Stir for 2 minutes. If there’s any striated bits seen I mix about another minute. After that it’s adding unnecessary bubbles. 1:1 mixing ratio by VOLUME. The resin half is much heavier, the hardener half is lighter.. so using a scale will give inaccurate results. Happy Arting!! 😁
I RECENTLY ORDERED A GALLON KIT OF KS RESIN OFF OF KANELLA CIRACOS LINK FROM HER YOU TUBE CHANNEL AND I JUST WANTED TO SAY HOW HAPPY I AM WITH ITS INCREDIBLE CLEAR AND AMAZINGLY HAPPY WITH IT FOR ALL I HAVE DONE WITH IT . VERY , VERY , HAPPY . GREAT PRODUCT !!!!!!!!!!!!!!!!!
Beautiful patina cup and a great instructional video.
Love your talent. I appreciate hand painted instead of vinyl wrapped cups. Beautiful work.
You did a great job explaining and I appreciate that you took your time so we could see exactly what you were doing at each step. Awesome mug.
Thank you so much for watching!
Love this cup it's Beautiful love the colors n Distressing
Thanks so much 😊
So beautiful! Can't wait to try!!!!!
LOOKS GREAT . LOVE IT .
Thank you so much!
BEAUTIFUL
Thank you!!
Very pretty!!
This is so beautiful 💕
Love it Amanda!
Great ideas and it looks easy!🥰🐸
Thanks for watching Onekka! ❤️
Beautiful 😍
Great video, thank you Amanda. When mixing the liquidity split resin, is there’s a difference on which you add to your cup first A or B? Thank you so much 😊
You have so far made this the easiest to understand and able to actually do one. Love my torch, same one. What is the difference between using the UV epoxy and the one I have which is liquid stone. I use that one on tumblers abs is great but just have never used UV do not sure of the benefits or differences
Ultra UV is our UV additives that can improve UV resistance in the cured coating for up to ten times longer than the regular formula. Liquid Stone and Liquid Art share many similarities, but the main differences are that Liquid Art is thinner and has a longer working time, while Liquid Stone will cure slightly harder.
Great video. You have such a relaxing voice while instructing what to do. The mug turned out beautiful. My colors must be off on my phone for this video cause you kept saying bronze and gold and I swear that was copper not bronze and bronze instead of gold, lol.
do you let it dry first for other colors ? or do it while it wet?
It's your preference! When it's wet, the colors will blend a bit, if you let it dry (these spray paints dry VERY quickly) your colors will be more separated. Both ways look great! This particular tumbler has a mix of both
neat! gives me some ideas!
Be sure to show us what you come up with! 😊
I have not tried the cups yet. How long does it take until it is ready to use? Thanks, Amanda great instructions!
Liquid Art Ultra UV is dry to touch in 10-12 hours and fully cured in 72 hours. Thanks for watching!
Love the video! Could this be done on a ceramic mug?
It absolutely can!
can you use acylic paint color shift ?
You absolutely can!
Where did you get the mug it’s self
What is the mug spinner you using called, do you have a link? Loved the video thanks so much!
In this video we are using a KSRESIN Cup Turner. They are available on our website 😊
I use KSresin fast set religiously. However, I would love to know how long I should be mixing. I use a food scale to ensure I get equal parts of A and B. I mix with a Popsicle stick or metal stirring stick. I stir for at least five minutes, but would love the proper mixing time. Any help is helpful.
Heya 👋 Measure by VOLUME. Stir for 2 minutes. If there’s any striated bits seen I mix about another minute. After that it’s adding unnecessary bubbles. 1:1 mixing ratio by VOLUME. The resin half is much heavier, the hardener half is lighter.. so using a scale will give inaccurate results. Happy
Arting!! 😁
Is there any harm in drinking out of these containers since you are using chemicals?
The epoxy resin remains only on the outside of the cup and cures to an inert plastic coating.
I RECENTLY ORDERED A GALLON KIT OF KS RESIN OFF OF KANELLA CIRACOS LINK FROM HER YOU TUBE CHANNEL AND I JUST WANTED TO SAY HOW HAPPY I AM WITH ITS INCREDIBLE CLEAR AND AMAZINGLY HAPPY WITH IT FOR ALL I HAVE DONE WITH IT . VERY , VERY , HAPPY . GREAT PRODUCT !!!!!!!!!!!!!!!!!
That is wonderful to hear! Thank you so much for your business!