Infiniti G35 G37 Fuel Gauge Problem Fix

Поділитися
Вставка
  • Опубліковано 5 кві 2018
  • Cleaning the fuel level sensor in the gas tank on a 2008 g35 sedan.
    Recommended amazon link: www.amazon.com/shop/justvlad
    As an Amazon Associate I earn from qualifying purchases
    My website: www.justvlads.com/
  • Навчання та стиль

КОМЕНТАРІ • 218

  • @JustVlads
    @JustVlads  6 років тому +19

    New video update and final fix: ua-cam.com/video/bIHGnvxjqUA/v-deo.html

  • @whitenugget3750
    @whitenugget3750 5 років тому +66

    Just watched this video about 2 hours ago, Me and my sister did it to her car, cleaned both sides, I didn't feel confident about it, but it took the Check Engine light off, Thanks :)

  • @jtdennis1919
    @jtdennis1919 5 років тому +32

    I don't have any problems with mine. But I just wanted to drop a line and say thank you! There are so many self-centered people in this world and you took the time to drop something so valuable! Thank you! :-)

    • @philkennedy2665
      @philkennedy2665 Рік тому

      My granddaughter has an Infinity and the gas gauge does not work. After viewing you video, I think I can fix it. Great video!!!

  • @mussamaduga3381
    @mussamaduga3381 6 років тому +66

    Bro respects for helping me out and not having to pay hundreds to a mechanic. Easy fix. Threw you a like and a subscribe 😎🙏

  • @frankjones89
    @frankjones89 Рік тому +4

    I was having gas gauge issue with my 2007 G35 coupe; replaced sending unit on driver side and did not fix the problem. Saw this video and did the cotton swab cleanup trick and problem fixed. Gauge is working again and your warning about the gas line saved me. Had a bunch of rags ready and did the trick. Thanks for posting this!! You saved me a big repair bill.

  • @shabaaz38
    @shabaaz38 Рік тому +5

    I just did this today on my 08 G37 coupe after watching your video. My gas gauge had been acting up the last few weeks. I cleaned the sensors on both sides of the tank. Was a pretty easy fix. Went for a drive after and the gauge still seemed way off. I came home shut off and restarted the car and right away it was reading near empty like it should. Filled up and all seems good now. Thanks a lot Vlad posting this! God bless you bro!

  • @ConceptCubeChannel
    @ConceptCubeChannel 5 років тому +13

    Great video. I followed it to fix my gas gauge which has been broken for years. It now works perfectly!

  • @JustVlads
    @JustVlads  6 років тому

    Helps me out: www.amazon.com/shop/justvlad

  • @jeffvickiek2089
    @jeffvickiek2089 3 роки тому +11

    Great tip! Thanks for the clear instructions. One safety tip...When I work on the fuel system and a tank of gas is opened, please disconnect the battery. One spark could ignite the gasoline. 😮

  • @alexfuentesyuherd
    @alexfuentesyuherd 5 років тому +23

    Bro this is mad helpful. I’m gunna have to try this on my G. I got your same problem. Great video doe 🙏🏽

  • @simbagarage5943
    @simbagarage5943 2 роки тому +9

    Great video. Thanks for posting. Best way to depressurize the fuel system is to remove the fuel pump fuses/relays while the engine is running. When the engine cuts out then the pressure is relieved from the system.

  • @hinope2524
    @hinope2524 Рік тому +2

    I just finish doing this on my 08 g35. Really easy to do. I made sure to disconnect the battery and open gas cap before starting. I didn't have any fuel leak out. Thanks for the video!

  • @JeremyPoley
    @JeremyPoley 5 років тому +42

    This video rocked. Did the same thing step by step on my car and it fixed the problem. Great video man! High quality shooting and great personality.

    • @JustVlads
      @JustVlads  5 років тому +4

      Thanks man! Glad it worked for you! Mine has been working flawless since the clean so it's a permanent fix for now🤙

    • @tonser316
      @tonser316 5 років тому

      Was your guys guage stuck ?? Mine is stuck over half a tank wondering if this will work

  • @geraldmiller4295
    @geraldmiller4295 Рік тому +1

    Bro, I love this video. Thank you. It was simple and easy to use. After watching your video, I rode around with a gallon of gas and ran my 2013 G-37 to empty before removing the pump to prevent to much gas from spilling out. This is a good fix.

  • @interlinkedMedia
    @interlinkedMedia 4 роки тому +10

    Waiting for the sun to come out so I can give this a try. Thanks for the upload!

  • @ijahwilson
    @ijahwilson 3 роки тому +6

    Wow i just finished doing that on my Infiniti g35 06. And it worked. Definitely save me some money. Real talk

  • @mikejonesss
    @mikejonesss 4 роки тому +7

    Man you are a life saver, since having the car for 2 years now I've never had it go above 260miles; mileage per gallon horrible. Just got my first Service Engine today, took it O'Reillys for a code check. Googled and found your video, did the work in pitch black with my flashlight. Check engine light gone and now it's at 350miles, subscribed and liked. You are the f*ckin man!

    • @FlacKoGoGetta
      @FlacKoGoGetta 6 місяців тому

      Did you clear the code or the code disappeared by it’s self did it to mine rn and the code is still on

  • @luigivq35ceballos91
    @luigivq35ceballos91 5 років тому +6

    I got the same problem im gonna do it tomorrow on my G35x . Thank you so much fOr this great video 🙏🔥

  • @devildog2931
    @devildog2931 6 років тому +6

    Great videos bro, it really helps me with my 350 . Keep up the great work !

    • @JustVlads
      @JustVlads  6 років тому +1

      Glad it helped and thanks for the support.

  • @thomaswilding8818
    @thomaswilding8818 6 років тому +10

    Nice one. I loosened the petrol cap, which released the air pressure and stopped fuel being pushed out through the pump when hose removed.

    • @scarlingdarIing
      @scarlingdarIing 2 роки тому +2

      Thank you for adding this comment(I know I'm like 3 years late but hey ..!) Because I kept wondering exactly that, as i watched people's videos about this..I wondered if doing that would help and was planning to try that way.. You answered that question! Thanks!

  • @IlDemaVideo
    @IlDemaVideo 5 років тому +1

    Great video, works for same issue on 350z, but remember for oring replacement!

  • @johnnfanning2680
    @johnnfanning2680 5 років тому +14

    Man thank you so much for putting up the video. I did the same thing and it fixed my fuel gauge

    • @johnnfanning2680
      @johnnfanning2680 5 років тому +2

      And I did what one of your viewers put on there reply. I turned on the car and then unplugged the fuel pump. Waited for the car to die. And it relieved all the pressure in the fuel line no spillage at all.

    • @tonser316
      @tonser316 5 років тому +1

      @@johnnfanning2680 hey brotha was your guage stuck or just not reading right? My guage is stuck overr half tank wondering if this cleaning process will work for me

    • @johnnfanning2680
      @johnnfanning2680 5 років тому

      @@tonser316 it just wasn't reading right. But give this a try it might fix it the needle might be stuck. And while you're at it go ahead and use the Q-tip in the alcohol and clean it all off. But be careful of the gasket do not disturb it otherwise you'll have to get a new one

    • @johnnfanning2680
      @johnnfanning2680 5 років тому

      @@tonser316 I don't know what type of vehicle you got. But my vehicle was an Infiniti G35 four-door sedan. And it worked out great. I did my buddies Nissan 350Z and it made the engine light come on. We just put a code scanner on it deleted the code that was coming up. The code was air in the fuel tank. He's gone several weeks and the engine light has not came back on. He also hit the gasket and the gasket would not fit again. So he had to get a new one. That's why I said don't disturb the gasket otherwise you'll have to get a new one

    • @tonser316
      @tonser316 5 років тому +1

      @@johnnfanning2680 i also have a sedan G35 hope this works thanks

  • @LuciferFCS
    @LuciferFCS 3 роки тому +2

    This also worked on my 2005 350z, it's also passenger side. Thanks for saving my $100 homie

  • @shaneb1148
    @shaneb1148 Рік тому +1

    Thanks for both videos, its the same problem with my 2009 Infiniti FX35.

  • @jayneprecup7742
    @jayneprecup7742 4 роки тому +14

    Another way to look at the problem is to check the resistance between terminals 2 and 5 on the fuel sensor unit and fuel pump (passenger side). Should read 3 ohms Full and 80 ohms empty. Then drivers side should read 3 and 43 , respectively between terminals 1 and 2. If these are in range, then issue is with dashboard gauge. If out of range, then try cleaning as suggested in this video.
    If dashboard gauge, a crude fix is to put a variable resistor (10 -100 ohm) across the above terminals for each sender, and find the “sweet” spot where the gauge reads half full when actually full and empty when a quarter full.

    • @spraggaa42
      @spraggaa42 2 роки тому

      where can I find the pin out for the terminals?

    • @giiodude
      @giiodude 2 роки тому

      I have a meter, where am I checking the terminals at?

  • @jozettesmith2619
    @jozettesmith2619 5 років тому +17

    Thank you so much for posting this information. You saved us $100s!

  • @jweezy8645
    @jweezy8645 3 роки тому +1

    Yup I’ll be trying this fix this weekend. Also have to try and fix the infamous airbag light lol. Appreciate the video dude!

  • @TheSaifRehmanCa
    @TheSaifRehmanCa 4 роки тому +1

    Thank you for this video, I got the same issue with mine.

  • @mhub3576
    @mhub3576 3 роки тому +4

    Those little bolts you have to take out are 8mm. Mine had paint on them I had to chip off to get the wrench on. I tried a screw driver but just ended up stripping out the screw head. So best advice is just use 8mm wrench or a socket if you can get in on. May have to chip off the paint first before a socket will fit. One other thing, be careful around the edge of that circular opening, its sharp. Found out the hard way.

  • @metop33
    @metop33 3 роки тому

    Thank you for the video man, great video and great job with your tutelage!!

  • @ansatsaghat4689
    @ansatsaghat4689 4 роки тому +2

    Thank you so much! hopefully will fix it soon enough.

  • @nathanfalco4863
    @nathanfalco4863 4 роки тому +1

    Hi! Great video! Question, is this the same process for a 2004 fx35?

  • @eluletjr
    @eluletjr 6 років тому +1

    Great video. Explained perfectly. Thanks

  • @kelseyreid5793
    @kelseyreid5793 Рік тому +1

    Wow! Amazing video, I definitely think I can do this myself! Wasted money on a used cluster 🤣

  • @FOne_Fan
    @FOne_Fan 3 роки тому +3

    Thank you for both of the videos. This fix worked great for my FX35

    • @jaxmoney4673
      @jaxmoney4673 2 роки тому

      What year you got I just put a new right sending unit in and it still doesn’t work

    • @MrGfMaster
      @MrGfMaster Рік тому

      How did you fix fx35 I need help pls

    • @MrGfMaster
      @MrGfMaster Рік тому

      @@jaxmoney4673 How did you fix the Fx35 I need help

    • @jaxmoney4673
      @jaxmoney4673 Рік тому +2

      @@MrGfMaster didn’t work think I gotta change the other one tbh

  • @carlosmedrano6969
    @carlosmedrano6969 6 років тому +2

    It works perfectly.Thanks

  • @davidhinton3595
    @davidhinton3595 Рік тому

    Did you disconnect the battery first?
    Unscrew fuel cap to relieve tank pressure.
    When you disconnected the plug before removing the sender unit you might consider sending 12 volts to the guage to rule out a faulty guage.
    Electrical contact cleaner can help you clean the contact surfaces on both the fixed and the moving arm.
    Very helpful video.

  • @rhondasanborn8635
    @rhondasanborn8635 3 роки тому

    thank you for sharing this video. very helpful.

  • @generallinks6644
    @generallinks6644 6 років тому +87

    Next time twist open the gas cap to release some built up pressure

    • @Mary-80
      @Mary-80 5 років тому +17

      Yes relieve the pressure
      AND
      for safety disconnect the battery

    • @philipholman1713
      @philipholman1713 4 роки тому +18

      That's Not related to fuel line pressure , if it was fuel pressure would go up and down with the fuel level of the tank. Remove fuse while running let the car run dry pressure is now zero.

    • @tasimota
      @tasimota 3 роки тому +4

      @@philipholman1713 Philip, I think you are right. The pressure in the line is created by the fuel pump, which is independent of the pressure of the tank itself.

    • @anestiskariotis2728
      @anestiskariotis2728 9 місяців тому

      @@philipholman1713 that is the correct way to do it

  • @cesarsamayoa4245
    @cesarsamayoa4245 4 роки тому

    Thank you i hope that will fix my problem to

  • @rafagas5150
    @rafagas5150 5 років тому +1

    After I pulled my pump and cleaned it then and reinstalled why is it that I can smell a lot of gas fumes when driving.im sure I put everything back on right and tight but I feel like the black rim still let’s out fumes.what do U think is going on??thanks in advance

  • @Kevin-yk7tk
    @Kevin-yk7tk 5 років тому +1

    Glad I found this before I bought a new pump.

  • @5aifee
    @5aifee 5 років тому +1

    Hi! Will this work on a 2005 g35 coupe? I believe I have the same issue.

  • @vongsakra253919
    @vongsakra253919 Рік тому

    Respect bro. My Honda has the unusual fuel indicator. Thank alot.

  • @granovprod
    @granovprod 2 роки тому +1

    Wow, thank u very much! Very useful!

  • @ricktirado1
    @ricktirado1 2 місяці тому

    It worked for me! Thank you!

  • @CarlosCastro-ht2xl
    @CarlosCastro-ht2xl 5 місяців тому

    Thanks for the share vid You made me feel confident I could do this Much Appreciated!

  • @austinrooper3805
    @austinrooper3805 6 років тому +2

    Thanks for the vid

  • @yoonseocho1956
    @yoonseocho1956 4 роки тому +1

    Got the same problem on my 250GT Nissan Skyline V36, better try this!!

  • @heatherclancy7616
    @heatherclancy7616 3 роки тому

    Thank you so much for this video

  • @user-ju8rr9rf1o
    @user-ju8rr9rf1o 2 місяці тому

    Pulled mine out, sprayed with carb cleaner with the red straw on it, worked perfect.

  • @tasimota
    @tasimota 3 роки тому +6

    Note: Toggling the accessory power on and off will cycle the fuel pump, however the air bubble won't be relieved until gas is pushed into the motor. You should get at least a rough idle until (or an engine stall) until the bubble is worked out.

    • @giiodude
      @giiodude 2 роки тому

      So you’re suggesting to have a small tank of gas ready to refuel after cleaning and then toggling the acc? I’m about to do this same project so any tips would help.

    • @aliciabooker8383
      @aliciabooker8383 Рік тому

      @@giiodude did you do this ? about to try this fix and was wondering the same thing about having gas on hand near by

  • @eliasal-hadi4029
    @eliasal-hadi4029 Рік тому

    this is what I need, thanks a lot😢❤

  • @ahill007ny
    @ahill007ny 2 роки тому +4

    Thanks I pulled and cleaned both units now the needle reads correct.

  • @rkw3000
    @rkw3000 11 місяців тому +3

    Do this with a full tank so if it ignites it doesn't explode. Gas fumes inside an empty tank is like sitting on a bomb.

    • @sureyyaaslanova9925
      @sureyyaaslanova9925 4 дні тому

      Pulling out of my mouth, my tank is full and i thought I’ll be driving for a week to empty the tank. Thank you

  • @michoacan91davi
    @michoacan91davi 6 років тому +9

    There's actually 2 fuel sending units. 1 on each side like you showed at 1st

  • @franker1111
    @franker1111 2 роки тому

    Dam I have the same problem with my 2006 G35, I'm gonna try it soon as I get home. I'll leave a comment about it when I do it to let you know if it works. Thanks again for posting that video

    • @Joe-uj5sm
      @Joe-uj5sm 6 місяців тому

      Did it work?

  • @EataPeachMike
    @EataPeachMike 6 років тому +2

    Good video by the way

  • @MrMusic55123
    @MrMusic55123 3 роки тому

    do you where to find the fuel filter and how to change it on that model?

  • @giiodude
    @giiodude 2 роки тому +1

    What are you using to clean it?

  • @mubushiralam351
    @mubushiralam351 4 роки тому

    Amazing video 🙏🏽

  • @TheNameYME
    @TheNameYME Рік тому +1

    Good Video Bro!!

  • @2mara
    @2mara 3 роки тому +4

    Wow! I know this is my problem but Lawd I can’t do that... my nails too long 😩 TY

  • @bassblaster505
    @bassblaster505 2 роки тому

    Def gonna try this on my 03 G! My gauge is stuck on E with the lights on lol

  • @rkw3000
    @rkw3000 11 місяців тому +1

    Use a pink eraser to clean electrical contacts. Also you can check the range of resistance as you clean it with a multimeter. make sure it works before putting it back together. Don't make any sparks...

  • @luzsantoni5305
    @luzsantoni5305 4 роки тому +4

    Great video! Question did you ever had your check engine service soon light on?

  • @abdullahhaqqi7484
    @abdullahhaqqi7484 5 років тому +1

    i have a 2007 g37 coupe and have the same problem and tried it, it worked but stopped again next time i started my car. when i pulled out the gas pipe, gas poured out of the tank instead of the cable

  • @dejuanisass6062
    @dejuanisass6062 4 роки тому

    i’m having trouble putting the floater back in it goes in but not all the way in where i can push it down to put the bolts down

  • @American_HitchHiker
    @American_HitchHiker Місяць тому

    Question, was your fuel leveling sensor light on before the repair? And if so did it go off after cleaning anything.

  • @jayneprecup7742
    @jayneprecup7742 2 роки тому +1

    The pins are on top of the tanks. When you pull the connector off, just put the probes in the connector on top of the fuel tank. No need to pull out the pump and float, but cleaning them may help as the video shows. In my case it did not and I replaced both sides, but that did not help. So my problem was with the fuel gauge in the dashboard, which is expensive. Hence the variable resistors.

    • @mrmrjims3865
      @mrmrjims3865 Рік тому

      mine was the cable, 2 wires were cut in the cable that connects to the fuel pump

  • @pblevins9764
    @pblevins9764 3 місяці тому

    Great video

  • @Qkfltpdls777
    @Qkfltpdls777 2 роки тому

    Could you make a video how to clean throttle body on our 08 g35s?

  • @clentonhendersom9997
    @clentonhendersom9997 2 роки тому

    Will this process work for eight 2011 FX 35?

  • @TeamExequias
    @TeamExequias 4 роки тому

    I did this and when I put everything back I know I put it right well turn on the car and fuel was licking after I turn off the car it drop a good amount then it stop i check nothing is loose is this normal the first time u start the car after doing this

  • @luisvague6339
    @luisvague6339 4 роки тому

    Would this work if I have a 2006 g35

  • @hendrikmadjoed9899
    @hendrikmadjoed9899 Рік тому

    What is the function of the black hose in the fuel tank

  • @kizito8888
    @kizito8888 3 роки тому

    Mine might be the actual pump. Or it might be that I am not placing the float in the right position. I have an M45 so it's difficult to tell if it's aligned back in the same spot inside the tank. It's getting irritating so I might just take it to the dealership. There's a recall on that issue.

  • @sukhchainsingh17
    @sukhchainsingh17 5 років тому +2

    Sir I am fuel gauge clean but fuel gauge no working wht problem

  • @benjaminperley5272
    @benjaminperley5272 4 роки тому +1

    I pulled mine out to clean it and discovered the little plastic cover was long gone. Either it’s floating around in my gas tank, or some mechanic for the previous owner forgot to put it back on. It seems to hold the pointer against the little piano key thing.

  • @christopherhamilton4373
    @christopherhamilton4373 4 роки тому

    What about 06 g35 sedan? Needle is always near full and half no matter how much i have

  • @DrayDray78
    @DrayDray78 3 місяці тому

    I have a 2005 G35 SEDAN and the issue I am having is knowing for a fact that I have a half a tank one minute the needle will show half a tank and the next minute after driving it for 5 miles the needle is sitting on low with the light on and later it corrects itself! This goes on back and forth and when I fill the tank it will move to just before full never past it! What would you say from experience will this procedure help me or do I have another problem?

  • @KevinRamirez-jd4pv
    @KevinRamirez-jd4pv 3 роки тому

    Does anyone know where I can find the fuel variable resistor/fuel leveler sensor (whatever you call the chip) by itself. I only need that peice, but I can't find it anywhere on the market. Please and thank you!

  • @toddsherwood6041
    @toddsherwood6041 Рік тому

    Did you use alcohol on the cotton swab or nothing at all?

  • @deonsantiago8232
    @deonsantiago8232 3 роки тому

    Will this issue also make the car not start?

  • @TheAsianExplorer
    @TheAsianExplorer 4 роки тому +2

    Gonna try this, my 2012 G37 Infiniti sedan is acting up at about 81k

  • @tyronebridges857
    @tyronebridges857 2 роки тому

    you used water on the q tip or new gas?

  • @budahookah919
    @budahookah919 5 років тому +5

    Why didn’t you remove the screws first, lift gauge, then remove fuel line, so fuel can just flow back into tank?

    • @ibanezrg320fm
      @ibanezrg320fm 5 років тому +6

      Probably because the fuel line is too short and awkward. You could try it your way but the pump assembly is so big that you'd pull the hose off and get gas everywhere resulting in fuel everywhere instead. I know because I did this yesterday.

  • @joseluna3784
    @joseluna3784 4 роки тому +3

    Pull fuel relay, start a few times,that will release tons of pressure...

  • @jaysantiagopr6949
    @jaysantiagopr6949 2 роки тому +1

    Thanks I went to the Infiniti dealer because my M3T ran out of gas but I didn't piss the empty tank it just tells me it's full or half a tank they didn't know how to fix anything I did it myself

  • @davidherrera4788
    @davidherrera4788 2 роки тому +1

    I have 04 Z and I did this to my sensors 2 days ago and it used to mark a full tank at 75% and I put gas in today and it filled up to F all the previous times it fill up to 75% keep y’all updated if it holds

    • @davidherrera4788
      @davidherrera4788 2 роки тому +1

      Also the driver side sensor I believe was positioned incorrectly from previous owner the floater was stuck might want to check that too

  • @gamingwithaaron171
    @gamingwithaaron171 5 місяців тому

    Are the older ones the same way

  • @sureyyaaslanova9925
    @sureyyaaslanova9925 4 дні тому

    Got a question. Can I still drive with gauge disabled?

  • @majidebrahimi7862
    @majidebrahimi7862 6 років тому +3

    great video Thanks, After I fixed the gage now I have a problem like a missed firing, any idea???

    • @paulmartinez1116
      @paulmartinez1116 6 років тому

      Majid Ebrahimi on which cylinder

    • @juansantiago6964
      @juansantiago6964 5 років тому

      I'm having same problem after I fixed the gauge now my car is not starting nor turning over does anybody have an idea what's going on?

    • @mynguyen2243
      @mynguyen2243 4 роки тому

      @@juansantiago6964 how did you get your car started? Wanna take mine apart but afraid to I'm gonna run into a problem like you

    • @juansantiago6964
      @juansantiago6964 4 роки тому

      @@mynguyen2243 I kept pushing the start button for about 20 min. And eventually started again.

  • @jesusgonzalezmachado
    @jesusgonzalezmachado Рік тому

    I got code p0463 wat side fuel sensor would i have to replace ..

  • @kyieshadavis5793
    @kyieshadavis5793 2 роки тому

    what’s the warning ⚠️ sign for ?

  • @davidgarcia9681
    @davidgarcia9681 Рік тому

    I have a check engine light for a p1233 code which says it’s the pump fuel module .

  • @hellapinoy6969
    @hellapinoy6969 5 років тому +1

    My G's fuel gauge started acting up a couple days ago. The needle started going up to 1/2 tank while I was driving, even though I knew I only had about a 1/4 tank left. I filled it all the way up, so the needle on the fuel gauge went up. But after driving for about 90 miles, the needle hasn't dropped one bit. It still shows a full tank.
    I might give this cleaning thing a shot. Thank you for sharing this tutorial

  • @Jesse_Nolan
    @Jesse_Nolan 5 років тому +3

    at first its still stuck, but after a little drive, and a fill up its reading normal now for me.
    After a week, It was stuck at 50% again.

  • @Hootinandhollerin
    @Hootinandhollerin 2 роки тому

    Did u disconnect the battery

  • @johnjohn6473
    @johnjohn6473 2 роки тому

    Bro good looking 🙏🏼