Being a retired geologist I started my career in 1980 as a "mud man" and then worked for a Diamond drill bit manufacturer in R&D of new synthetic diamond cutters as well as pressure coring equipment. I worked on wells from offshore Louisiana to Prudhoe Bay and in between. Probably one of the most mis-understood industries and processes on the planet. This was a great video! It should be seen by everyone.
@@slickwilly6868 Trump eliminated bureaucratic boondoggles. Biden reinstated them X 10. ESG is killing USA economy. Do your research and make informed decisions on how you vote. It may be too late but I am always an optimist. In the end, God has it. Thy will be done...
I was a directional driller to i survived a colpase just 14 back ops later. It just has a little bend on the end so they keep in straight until they are ready and start turning it. Imagine sticking a wire stick into jelly and turn it does nothing take it out put a tiny little bend on the tip turn it you now have control you can only turn some much % per m so its not like a 90 degree turn its a nice sweep of a bend and if you wanna go straight againg you just turn the tip to its flat position
@@bigtasty1082 Are you still in this position? I wonder if I can learn more. I am new to the industry and have some questions about directional drilling. I hope to have the opportunity to communicate with you.
good video but I thought it could have gone a bit more at the end to explaining how it takes in the natural gas from that small tunnel the drill bits made all the way down there
I just hope that your ram-sheers on the BOP are sufficient to cut through the connection pieces of the pipes as those are thicker and tougher, we all should remember Deep Water Horizon, this was why the BOPs ramsheer failed.
You drill for direction the entire time after the curve.. up and down hitting the layer of shale. Then you line you frac ports up a cording to where the geologist found gas in the shaker samples (they take samples of cuttings from down hole all pumped back up through the over flow every 5-10 meters).. that's actually how it works.. as if we do one curve smoosh right into sweet crude straight line baby.. yeah right..
Are you still in this position? I wonder if I can learn more. I am new to the industry and have some questions about directional drilling. I hope to have the opportunity to communicate with you.
depends upon the type of drilling method you apply. Ac drilling achieves approximately 150m while RC drilling can be upto 600m however the most expensive one is diamond drilling that can achieve maximum depths. Hope this was helpful
I am facing a problem while digging the well, I find depleted soil with small watercourses that prevent me from completing the drilling, knowing that I put cement and it did not work
He is a 2 year old child boy from indià Tamil nadu .He fell into this big hole .But he died in this hole after 4 days .Now his dead body took from this big hole.
Hi can someone please advice a solution for the removal of borehole drill bits that have come off and are stuck in the borehole. I am travelling to Benin to try to remove 20 x 3m drill bits that have come off and are stuck upto 63m in the ground. The borehole was being made for the provision of water for local villagers. Many thanks in advance.
what gets into the ground when oil and gas are taken up? what material has the ability to stabilize the subsoil as good as oil and compressed gas nothing can replace Oil and Gas so subsoil worldwide is and will be unstable.
Environmental health and safety standards haha!!! It's all about solar and hemp fuel that we need to be using Even when they treat that water for farming purposes they're still the salt brine run off and that gets dumped into ponds and marshes and that's bad.
TF do you think solar panels are made from? What do you think the batteries are made from? Good luck having solar paneled heavy equipment. And WTF is hemp oil?
Being a retired geologist I started my career in 1980 as a "mud man" and then worked for a Diamond drill bit manufacturer in R&D of new synthetic diamond cutters as well as pressure coring equipment. I worked on wells from offshore Louisiana to Prudhoe Bay and in between. Probably one of the most mis-understood industries and processes on the planet. This was a great video! It should be seen by everyone.
How do people get a hold of the money thats needed to get into oil & gas drilling, and how much will be needed?
@@slickwilly6868 Trump eliminated bureaucratic boondoggles. Biden reinstated them X 10. ESG is killing USA economy. Do your research and make informed decisions on how you vote. It may be too late but I am always an optimist. In the end, God has it. Thy will be done...
I need your mail address
I’m also Geologist and I like your experience with the Oilfield! My dream is to earn more experience .
hello sir, im budding geologist , tommorow i have interview in oil and gas sector now watching this . aspiring to be like you gaining experience .
Wow, I had no idea. This is wayyyyyyy more complex than I imagined. Good video. Thank you.
When they hit bedrock they start drilling horizontally clear ✍🏼✍🏼✍🏼✍🏼
What is the maximum depth of wells you achieve? Do you use directional drilling?
I was a directional driller to i survived a colpase just 14 back ops later. It just has a little bend on the end so they keep in straight until they are ready and start turning it. Imagine sticking a wire stick into jelly and turn it does nothing take it out put a tiny little bend on the tip turn it you now have control you can only turn some much % per m so its not like a 90 degree turn its a nice sweep of a bend and if you wanna go straight againg you just turn the tip to its flat position
@@bigtasty1082 Good explanation. Downhole motor technology is pretty cool too.
@@bigtasty1082 Are you still in this position? I wonder if I can learn more. I am new to the industry and have some questions about directional drilling. I hope to have the opportunity to communicate with you.
Someone available I need some info regarding drilling ?
wow this is amazing! thank you!
I'm currently doing research on oil rigs and this is one of the best!
I swear this guy's the narrator for all these animation videos including the disaster ones.
Hi
It’s a robot text to speech voice lmao
At least this commercial didn't make me watch a commercial before I got to the.... commercial.
hello everyone
Be friends
Informative and good video. Anybody can understand it easily.
"Well trained". 😁
Where are you from
@@shoaibaliali2570 why you lookin' for a date? 😄
Wow what an animation .....each and everything crystal clear 🔥🔥
Perfect!!! I can know that how to work for the tricone drill bits.
Laguna
What is the maximum depth of wells you achieve? Do you use directional drilling?
Great video very well explained
Very informative. A great video 👍
good video but I thought it could have gone a bit more at the end to explaining how it takes in the natural gas from that small tunnel the drill bits made all the way down there
I was laughing my 4$$ in online school, this video helped a lot, thanks!
I now know how to drill fuel
we also use dth hammer and drill bit for well drilling.
If you like to move directly to the abstract: 4:45
Soooo so glad we have Steve Bannon on our side. Thank God.
Which company made the 3D animation? Well done
"Well planned infrastructure". I see what you did there
love the landscaped shrubs surrounding the well pad... lol.
I just hope that your ram-sheers on the BOP are sufficient to cut through the connection pieces of the pipes as those are thicker and tougher, we all should remember Deep Water Horizon, this was why the BOPs ramsheer failed.
@MotoVation
Those operators knew that which led to a pissing match
I have no interest in natural gas but this video was so interesting.
Я того все этот нихера не понятно объясняет
Я в этом видео больше узнал чем за 2 года
Салам Артём
Very helpful, thank you!
38бк
no one:
High school English teachers: 4:30
It’s got me stuffed how they know what the hell is even going on down there without seeing a bloody thing ?
Fon Jet life is crazy
Fon Jet same it's amazing.
Measuring equipment that tells them inclination, azimuth, some info about formation type, etc. so every 90' they can adjust accordingly.
You drill for direction the entire time after the curve.. up and down hitting the layer of shale. Then you line you frac ports up a cording to where the geologist found gas in the shaker samples (they take samples of cuttings from down hole all pumped back up through the over flow every 5-10 meters).. that's actually how it works.. as if we do one curve smoosh right into sweet crude straight line baby.. yeah right..
Are you still in this position? I wonder if I can learn more. I am new to the industry and have some questions about directional drilling. I hope to have the opportunity to communicate with you.
nice
Wow
Excellent
how they know there are gas below the earth??
Very informative. Thanks.
great video
What a great video and explanation ,Thx for that and Best Regards from Canada! 👍🥂💕✌
How horizontal drilling is completed??
horizontally
@@elijahcrosby786 ohh... Believe me I don't have any doubt now...
Good well drilling explanation
20 years of our business
Well explained sir
"Well" explained! 😁
Wow. This is so interesting and unheard information.
Many thanks for this astounding explanation
Jesus that must be tedious and hard to keep doing those steps over and over
This is great!
Great video, very well explained.
What is the maximum depth of wells you achieve? Do you use directional drilling?
Guys, it's 4 am and I can't stop watching oil rig videos. Send help
What is the maximum depth of wells you achieve? Do you use directional drilling?
depends upon the type of drilling method you apply. Ac drilling achieves approximately 150m while RC drilling can be upto 600m however the most expensive one is diamond drilling that can achieve maximum depths. Hope this was helpful
Here in Fort Stockton, Texas we have one around 25,000 feet deep. Vertical well, not horizontal.
This is billion dollar business.
So are they using flexible pipe or what? Lol that animation looks like a 90° angle! How is the drill gunna spin with stability like that
Hopefully my dream can come true to have my own oil rig, Praise God......
Interesting
Super super good welcome
wonderful and entertaining explanation
Alejandra Jaspe see more video related to drilling rig on my channel
Video ini sangat bermanfaat, informatif, mudah di pahami dan bisa dijadikan media melajar.
What is the maximum depth of wells you achieve? Do you use directional drilling?
How to summon democracy:
I am watching this video from the rig lol.
Which rig are you working on?
good work
what software did you use to make this animations? Its really nice!
Did you find it?
I am facing a problem while digging the well, I find depleted soil with small watercourses that prevent me from completing the drilling, knowing that I put cement and it did not work
what a nice video! perfect!
my dad used to work for this company 😭😭
i felt nostalgic when saw this cause used to work there for few years ten years back.
How was the experience? was it easy to handle?
Pray for surgith
Who is he and what happened ?
He is a 2 year old child boy from indià Tamil nadu .He fell into this big hole .But he died in this hole
after 4 days .Now his dead body took from this big hole.
So natural gas is freely available
You just have to go get it
Perfect!
How can I avoid running out of soil while drilling a well?
thank you for this information sir, i think this does not come under mining act
Hi can someone please advice a solution for the removal of borehole drill bits that have come off and are stuck in the borehole. I am travelling to Benin to try to remove 20 x 3m drill bits that have come off and are stuck upto 63m in the ground. The borehole was being made for the provision of water for local villagers. Many thanks in advance.
did you figure it out?
Use an overshot with a wireline unit?
good luck 🤣🤣🤣
Dumb question : will the earth crust eventually collapse due to over drilling.?? All that missing oil over time? Or oil is born naturally everyday. 😂
You wouldn’t notice it
Good information for the studetns
U are not da school
goosework be flopping rn
Christmas 🎄 is close. Close the well and celebrate the new year lmao.. Oh dont forget the rig move! OH S*it.
Nice video but How do they even drill so deep though? 12km is the deepest…
Was thinking the same thing. The drill bit is hooked up to a thick metal wire.
Natural Gas?
wasn't chesapeak a forest ?
mechanism
Why did the man fall down the well? Because he couldn’t see that well.
ممتاز عزالله
3:03 I guess friendly fire was on?
Horizontal doing would collapse the land in the future
This is an advantage to see such
Surjith
Ok🎉😂😅😊😮
What program is used to do this video?
منتاز
You left out a few bit's lol. Like Frac, coil tubing, or a work-over rig! Those should be explained too!
Hi i see your company need animation service we have 20 animator i will give high quality work.
I DRINK YOUR MILKSHAKE!
How can they change direction when drilling
Great explanation!
Great explanation 🤘🏽
What is the maximum depth of wells you achieve? Do you use directional drilling?
@@AlekseenkoVA you asking me? I’m no driller
@@cajun3197 Clearly, well, I'm not a driller either, I'm just curious
@@AlekseenkoVA umm ok 👍🏽
what gets into the ground when oil and gas are taken up? what material has the ability to stabilize the subsoil as good as oil and compressed gas nothing can replace Oil and Gas so subsoil worldwide is and will be unstable.
I believe it's called concrete.
Surjith 😭
Environmental health and safety standards yeah right
wow great video keep going on
Environmental health and safety standards haha!!! It's all about solar and hemp fuel that we need to be using Even when they treat that water for farming purposes they're still the salt brine run off and that gets dumped into ponds and marshes and that's bad.
TF do you think solar panels are made from? What do you think the batteries are made from? Good luck having solar paneled heavy equipment. And WTF is hemp oil?
Andai ada yang bahasa Indonesia nya
When’s lunch?!
ممتاز جداً
ممتاز ممتاز
Zoan